Homepage HERD
SEEDERS & SPREADERS
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  BACK  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS  
Request Postal Mail Brochure  CONTACT  US 
800-982-1280
Email Questions or Comments
•  Electric Broadcast Seeders - Model GT77ATV
•  Electric Broadcast Seeders - Model I-92, I-258
•  PTO 3-Point Hitch Seeders - Model M-12
•  3-Point Hitch Broadcast Seeders - Model 550 & 750
•  3-Point Hitch Broadcast Seeders - Model 1200
•  3-Point Hitch Broadcast Seeders - Model 2440
•  Sand Spreaders
     CLICK  ABOVE  FOR  DETAILS
THIS  DATA  DUPLICATED  FROM  THE  KASCO  WEB  SITE

 TOP  OF  PAGE 

Electric Broadcast Seeders
Model GT-77 ATV
Specifications:
• Our most popular seeder mounts to any ATV, utility vehicle or tractor. 3 pt hitch and 2 receiver hitch available.
• Vibrating agitator for Sure-Feed of material being spread.
• Ideal for spreading clover or alfalfa with a 28' spread width.
• Ability to center the spread pattern
• Will broadcast all types of materials
• Hopper capacity of 77 lbs. of fertilizer or 1.2 bushel of seed.
• 4-bladed plastic fan, 12 volt electric motor hooks directly to fan (low amp draw)
• Hopper lid to keep material in hopper and dry at all times.
• Plastic fan standard, Aluminum fan optional

JPH Mounting Kit (Shown Above) -
For All ATV's & UTV's with 2" receiver AND Tailgate
MODEL DESCRIPTION WEIGHT PRICE
KAGT-77-ATV ATV Seeder (Must order mounting cartons listed below) 38 lbs. $365
ATV Mounting Cartons for GT-77-ATV
KAJPH-1 Mounting Kit for all John Deere Gators, Polaris Rangers, Kubota RTVs, etc. For any utility vehicle with 2" receiver hitch AND tailgate 35 lbs. $235
KAT Mounting Kit for all ATV's with metal racks 21 lbs. $80
KAWP Mounting Kit for Kawasaki Mule (Bolts to bed); Kawasaki Prairie (With plastic rack); Utility vehicles with dump beds (Bolts to Bed) 28 lbs. $80
KAX Mounting Kit for Polaris - All models except Trail Blazer & Scrambler
**Note: Note for 2010 & Older Models**
36 lbs. $80
KAD Mounting Kit for Pick-up Truck, Farm Tractor, Lawn Tractors, & Turf Vehicle 10 lbs. $80
KA521 Cat.0 3-Point Hitch for GT-77 27 lbs. $130
KA544 Cat.I 3-Point Hitch for GT-77 27 lbs. $130
KA660 2" Receiver Hitch for GT-77 13 lbs. $130
KA661 2" Receiver Hitch (L-Shaped) for GT-77; for units with low clearance 24 lbs. $170
Accessories for GT-77 Seeders
KA501-AL Aluminum Fan for GT-77-ATV, I-92, or I-258 Seeder/Spreaders lbs. $105
KA537 45 Angle Mounting Kit 7 lbs. $55
KA536-Kit Front Chute and Spout Kit for GT-77 (For FWD Broadcasting) 7 lbs. $215
KA811 Rheostat to control width and depth of spread (Speed of Spinner) 2 lbs. $115
KA517 Blocking Plate (Blocks 1/2 of Gate for Lessor Rates) 1 lbs. $25
KA538 Native Seeds Kit 3 lbs. $50
KA672 Fire Ant Kit (Includes All Plates) 1 lbs. $50
KA671 Ext. Control Handle for Gate 3 lbs. $50
KA579 Rope Control Handle for Gate 1 lbs. $30
KA572 10' Cable Control Kit for Gate 3 lbs. $70
KA561 Electric Actuator for Gate 4 lbs. $275
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 7/1/2018

 TOP  OF  PAGE 

Electric Broadcast Seeders
Model I-92 & I-258

KA660 - 2" Hitch Receiver Mtg. Kit

KA661 - 2" Hitch Receiver Kit (L-Shaped)
*Note: Does not fit all UTV's - Please Call*

KA544 - 3pt. Mtg. Kit
Specifications:
• Can be purchased with 2" Receiver Hitch Mount, Front Mount or Side Mount.
• Ideal for front of tractor, pick-ups, jeeps, etc...as all you need is 12 volts to run this seeder.
• DO NOT MOUNT ON ATVs!
• I-92 comes with an agitator to give Herd's Sure-Feed of material through the opening.
• Center the spread and meter the amounts with Herd's centering and opening control design, (now stainless steel)
• 184 lb., 3-1/2 Cubic Feet, or 2-7/8 Bushels, Capacity Hopper
• Plastic fan standard, Aluminum fan optional

JPH Mounting Kit (Shown Above) -
For All ATV's & UTV's with 2" receiver AND Tailgate
MODEL DESCRIPTION WEIGHT PRICE
KAI-92 Electric Seeder {Less Mtg.} 86 lbs. $550
KAI-258 Same as KAI-92, w/ Vibrating Style Agitator {Less Mtg.} 86 lbs. $550
KA660 2" Receiver Hitch Mounting Kit 12 lbs. $130
KA661 2" Receiver Hitch (L-Shaped) 24 lbs. $170
KA544 3pt. Mtg. Kit 27 lbs. $130
KAJPH-1 Mounting Kit for John Deere Gator, Polaris Ranger, Kubota RTV, UTV's, JD XUV's and any utility vehicle with 2" receiver hitch AND tailgate 44 lbs. $235
Accessories for I-92 Electric Seeders
KA808A Width-Control Kit; includes blocking plate, rheostat, collar, and guard with 5/16" holes for coarse granules 4 lbs. $240
KA822-KIT Front Chute and Spout Kit, for orchard use 10 lbs. $255
KA811 Rheostat to control width and depth of spread (Speed of Spinner) 2 lbs. $115
KA517 Blocking Plate (Blocks 1/2 of Gate for Lessor Rates) 1 lbs. $25
KA982 Hopper Extension (recommended for seed use only)128#, 2 bushel capacity 12 lbs. $60
KA501-AL Aluminum Fan for GT-77-ATV, I-92, or I-258 Seeder/Spreaders lbs. $105
Accessories to Open/Close Seed Gate
KA579 Rope Control Kit for Gate 1 lbs. $30
KA572 10' Cable Control Kit for Gate 3 lbs. $70
KA561 Electric Actuator for Gate 4 lbs. $275
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 7/1/2018

 TOP  OF  PAGE 

PTO 3-Point Hitch Seeders
Model M-12
The Model M-12 is a Mighty 3-Bushel Seeder ideal for spreading Seeds or Fertilizer.
Specifications:
• 3-Point Mounting is Quick and Easy
• Shielded telescoping PTO shaft
• Two Cibtrik Handles (one upper and one lower) for Ease of Control
• Rotating Agitator Over Opening for Even Feeding
• 4-Bladed Fan with Lap-Over Blades
• Oil-Bath Gearbox for Less Maintenance, Quieter, and Smoother Performance, and Longer Life
MODEL DESCRIPTION WEIGHT PRICE
KAM-12 Category 1 Seeder, 3-Bushels or 192# Capacity 70 lbs. $665
KA501-58-AL Aluminum Fan for M-12 Seeder/Spreaders lbs. $105
KA982 Hopper Extension (Recommended for Seed Only), 2 Bushel or 12# Capacity 12 lbs. $65
KA796 & KA913 Lid & Spring 5 lbs. $55
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 7/1/2018

 TOP  OF  PAGE 

3-Point Hitch Broadcast Seeders
Model 550 & Model 750
The model 550 & 750 have everything going for them from manual to hydraulic control...lid...side pattern kit... plus 2 styles of banding kits. All this, plus rigged construction to give you the service you need. You can control seed amounts down to 3 lbs. per acre and fertilizer from 50 lbs. to 1,000 lbs. per acre. Easy-adjusted pattern control enables you to center the spread of light or heavy material. 14 gauge steel hopper with welded seams - round hopper base prevents lodging of material and assures even feeding. Quick-Tach, shielded, telescoping power take-off shaft and gearbox for long, trouble-free use. Heavy cast-iron gearbox has tapered roller bearings, drop-forged gears and filled with oil. Gearbox is standard for 540 RPM but can be ordered for 1,000 RPM tractors also. Your answer for spreading all types of seed and fertilizer as well as salt and calcium on ice and snow.
Specifications:
• 3-Point Seeder for Category I Tractors (Not Quick Hitch Compatable)
• 14 Gauge Steel Hopper with Round Base; Prevents Lodging of Material and Assures Even Feeding
• Quick-Tach PTO Shaft and Gearbox
MODEL DESCRIPTION WEIGHT PRICE
KA550-3PT Category 1 Seeder, 5 Bushels or 300# Capacity, 540 RPM 216 lbs. $1,680
KA750-3PT Category 1 Seeder, 9.6 Bushels or 750# Capacity, 540 RPM 216 lbs. $1,850
Accessories for Seeders
KA835 Lid (2-Pieces)
Fits 550 & 750
24 lbs. $240
KA158 Lime Agitator (for dry or dehydrated lime only)
Fits 550 & 750
4 lbs. $75
KA248 Hydraulic Motor & Valve
Fits 550 & 750
22 lbs. $950
KA629 Skid Steer Plate (For Universal Mount Skid Steers)
Fits 550 & 750
70 lbs. $600
KA1090 Small Seed Hopper with Handle, 80# or 1.3 Bushel Capacity
Fits 750
33 lbs. $650
KA1099 Lid Adapter Kit (for use with #1090 Small Seed Hopper)
Fits 750
2 lbs. $75
KA1000 Hydraulic Remotr Control Kit for Gate(requires 8" stroke ASAE hydraulic cylinder with 28-3/8" extended length.) Cylinder not included
Fits 750
31 lbs. $395
KA1028 Kit for Use with #1000 Kit install small seed hopper
Fits 750
13 lbs. $195
KA217 Brackets to Convert from Cat. I to II
Fits 750
10 lbs. $170
KA575 Electric Actuator to Open/Close Seed Gate 5 lbs. $325
KA629 Skid Steer Plate 70 lbs. $600
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 7/1/2018

 TOP  OF  PAGE 

3-Point Hitch Broadcast Seeders
Model 1200
This model has a 1200 lb. capacity together with all the conveniences you'll want. A popular broadcaster used for spreading fertilizer and all sizes of seeds. Also used for spreading calcium or salt on ice or snow and is ideally suited for golf courses, nurseries, shopping centers, schools, highways, parks and other large grassy area. Amount of spread per acre of seeds may be controlled down to 3 lbs. per acre and fertilizer from 50 lbs. to 1,000 lbs. per acre. No Special Parts needed to change from seeds to fertilizer. Get an even spread with Herd's easy-adjusted pattern control. Rotating agitator and fan driven by heavy-duty enclosed gearbox and shielded power take off shaft. Heavy cast iron gearbox has tapered roller bearings, drop-forged gears and is filled with gear oil. Gearbox is standard for 540 rpm, but can be ordered for 1,000 rpm tractors also. Heavy duty 14 gauge steel hopper with welded seams. Round hopper base prevents corner lodging of material, assures better feeding. Rugged construction...2 inch square tubing frame with built-in stand.
Specifications:
• 3-Point Seeder for Category II Tractors (Quick Hitch Compatable)
• 1,200# and 16 Bushel Capacity
• No Special Parts needed to change from Seed to Fertilizer
• Gearbox is Standard for 540 RPM; Optional for 1,000 RPM
• Heavy Duty 14 Gauge Steel Hopper with Welded Seams
• Round Hopper Base
MODEL DESCRIPTION WEIGHT PRICE
KA1200C-3PT Category 2 Seeder; 1200# or 16 Bushel Capacity *Quick Hitch Compatible* 291 lbs. $2,250
Accessories for 1200C Seeders
KA1087 Lid (2-Piece) 34 lbs. $290
KA1000 Hydraulic Remote Control Kit for Gate(Requires 8" stroke ASAE hydraulic cylinder with 28-3/8" extended length). Cylinder NOT included. 31 lbs. $395
CR2508DU 2.5" x 8" Cross Cylinder 20 lbs. $170
CR6-1/2 6' x 1/2" Hyd. Hose lbs. $15.75
CR41-6x8 3/8" Male - 1/2" Female Adaptor (Each) lbs. $4
KA1028 Kit for use with 1000 Kit to Install Small Seed Hopper 13 lbs. $200
KA158 Lime Agitator (for dry or dehydrated lime only) 4 lbs. $75
KA1090 Small Seed Hopper with Handle, 80# or 1.3 Bushel Capacity 33 lbs. $650
KA1099 Lid Adaptor Kit (For use with Mini-Hopper) 2 lbs. $75
KA841 Nose Cone (for 1200C Small Seed Hopper Installation) 5 lbs. $55
KA248 Hydraulic Motor & Valve 22 lbs. $950
KA1125 Brackets to Convert From Cat. II to Cat. I 10 lbs. $160
KA575 Electric Actuator to Open/Close Seed Gate 5 lbs. $325
KASH-402 Skid Steer Mounting Kit 225 lbs. $735
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 7/1/2018

 TOP  OF  PAGE 

3-Point Hitch Broadcast Seeders
Model 2440
Specifications:
• Hydraulic Remote Control comes standard on this model.
• Use your own 8" stroke cylinder to open and close the seed gate from your tractor seat.
• 3-Point Seeder for Category II Tractors (Quick Hitch Compatable)
• Heavy-duty independent stand and carrying frame.
• Hopper is 14 gauge steel with full welded seams and good slant for self-cleaning.
• Heavy cast-iron gearbox has tapered roller bearings, drop-forged gears and is filled with gear oil.
• Gearbox is standard for 540 rpm, but can be ordered for 1,000 rpm tractors also.
• Shielded power take-off shaft with replaceable universal bearings.
• Rotating agitator for even feeding. Heavy-duty corrosion resistant aluminum alloy fan with replaceable blades.
• Spread pattern easily centered by adjustable base plate.
• Easy-Adjust Pattern Control for even spreading up to 40 feet wide.
• Amounts can be controlled from 3 lbs to 1,000 lbs.
• Uniform spreads up to 40 ft. Weight of material determines width of spread.
MODEL DESCRIPTION WEIGHT PRICE
KA2440 3-PT Category 2 Seeder, 2440# or 32 Bushel Capacity, standard with hydraulic remote control for Gate
(Requires 8" stroke ASAE cylinder, with 28-3/8" extended length, NOT included)
525 lbs. $4,050
CR2508DU 2.5" x 8" Cross Cylinder 20 lbs. $170
CR6-1/2 6' x 1/2" Hyd. Hose lbs. $15.75
CR41-6x8 3/8" Male - 1/2" Female Adaptor (Each) lbs. $4
Accessories for 2440 Seeders
KA1136 Lid (2-Piece) 51 lbs. $360
KA158 Lime Agitator for Dry or Dehydrated Lime Only 4 lbs. $75
KA1090 Small Seed Hopper with Handle, 80# or 1.3 Bushel Capacity (Fits inside Hopper) 33 lbs. $650
KA1037 Nose Extension (for Small Seed Hopper Installation) 10 lbs. $75
KA1039 Small Seed Hopper Hydraulic Controls 18 lbs. $200
KA248 Hydraulic Motor & Valve 22 lbs. $950
KA575 Electric Actuator to Open/Close Seed Gate 5 lbs. $325
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 7/1/2018

 TOP  OF  PAGE 

Sand Spreaders
Models 5.5, 750S, 750SSS, 1200S
We have three models for wet sand. The 5.5 holds 550# of sand, the 750S holds 1200# and the 1200S holds 2000#. These models are 3 pt. and run off a 540 P.T.O. All units will handle sand stored outdoors. Moisture content does not matter. If it is fine sand, let us know as the agitator is different. We recommend the tractor be run at 2/3 throttle so the P.T.O. is about 400 RPM. This will give a spread width of 20ft. As you slow the motor, the spread width will become narrower. When doing sidewalks, there is a fan shroud, (#1005), to hold narrow widths. All units come with a regular agitator for seeds, fertilizer and salt only. All materials can be spread with the regular agitator (#147), but will not go as wide as this unit has a slow down ratio on the gear box.
Specifications:
• Will spread 275 pounds of sand in one minute
• 20 Foot Width Maximum
• Wide Open Gate
• Fan shroud for sidewalks
• Can be used for Dry Ag Lime
• Comes with Regular Agitator for seeds and fertilizer. (Spread width will be narrower)
MODEL DESCRIPTION WEIGHT PRICE
KA5.5 Wet-Sand Spreader, 550# Sand Capacity 211 lbs. $2,185
KA750S Wet-Sand Spreader, 1200# Sand Capacity 237 lbs. $2,340
KA1200S Wet-Sand Spreader, 2000# Sand Capacity *Quick Hitch Compatible* 305 lbs. $2,760
KA750SSS 750S (less PTO), Skid Steer Plate & 248 362 lbs. $3,640
KASCP2011 "Scoop & Spread" Skid Steer Salt & Sand Scoop Spreader 525 lbs. $4,630
Accessories for Sand Spreaders
KA248 Hydraulic Motor & Valve for Sand Spreaders 22 lbs. $950
KA1005 Fan Shroud 26 lbs. $260
KA860A Optional Agitator for "Sugar Sand"(Standard on 2017 and newer units) 15 lbs. $225
KA629 Skid Steer Plate (for 750S & 5.5 only) 105 lbs. $600
KA575 Electric Actuator for Gate 4 lbs. $325
KA225-HYD Hydraulically Controlled Banding Kit - User must select either the 1000 or the 232 kit to complete installation

*Note: For mounting on a 750-BPT or 1200C - Requires #1000 Hydraulic Remote Control Kit and #1119 Pointer Kit*

*Note: For mounting on a 2440 - Requires #232 Mounting Kit and #1137 Pointer Kit
58 lbs. $1,150
KA225-MAN Manually Controlled Banding Kit, Uses two seperate manual levers. One controls right side, one controls left side of banding kit. No additional kits required for use. 61 lbs. $1,320
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 7/1/2018
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS