Homepage Renn
Jiffy Bale Processors
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  BACK  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS  
Request Postal Mail Brochure  CONTACT  US 
800-982-1280
Email Questions or Comments

THIS  DATA  DUPLICATED  FROM  THE  RENN MILL  WEB  SITE

Renn Jiffy Bale Processors
There are three models in the Jiffy Bale Processor line: the 927, 928 and the 958.

The 927 and the 928 are designed with a round cradle bar capable of handling all types, shapes and sizes of bales (including high moisture bales) up to 72" long.

The 958 Model features the capacity to handle 4' x 4' x 8' square bales. The cradle is " x 1" flatbar rolled on edge. You will obtain the best mix of feed through the Jiffy patented rocking cradle. Feed from the bale shell and the bale core is effectively mixed to eliminate "deadspots" of poor feed, eliminating the need for the operator to constantly check over the shoulder to reverse bale spinners or rotation chains in order to clear slugs or hang-ups and the rocking cradle eats away at the bale until it's done, with no intervention.
The length of cut is regulated by the infinite hydraulic cradle rocking speed and insures that there are no gaps in the feeding windrow.

The bale loading forks are fully adjustable and have safety transport pins. An additional set of hugger arms are on the 958 to gently lower the long 8' bales into the cradle.

The 958 heavy duty rotor has heat treated spring steel hammers and 2" shielded rotor bearings insuring uniform shredding and even distribution. Both the 927 and 928 models have an access door opposite the discharge for easy twine removal. All models come standard with a flip up shield for easy shear pin access, constant velocity PTO as well as adjustable hitch and heavy duty clevis and Department of Transportation safety chain.
All models of Jiffy Bale Processor have only 14 bearings on the entire machine. That means less moving parts to wear out! There are no belts to replace, no chains to repair and no expensive hydraulic motors to maintain.

Both the 927 and 928 have a full compliment of options to cover all conditions, including a hydraulic deflector kit to allow deflector movement from the tractor cab. The flexible deflector shield comes standard with a spring assist for easy adjustment and forms excellent windrows or fills feedbunks.

Raise the deflector and spread straw perfectly for bedding. Bedding straw with a Jiffy will save you money in straw usage as well as clean up costs.

Good clean bedding directly relates to less stress and healthier cattle during the cold weather.
MODEL DESCRIPTION WEIGHT PRICE
RNRJS927 Model 927 (Left Hand Discharge) w/ Large Tire Option 5,765 lbs. $24,180
RNRJS928 Model 928 (Right Hand Discharge) w/ Large Tire Option 5,800 lbs. $25,180
OPTIONS
RNHDL Optional Hydraulic Deflector Lift For 927, 928 lbs. $750
RNJ727-009 Hydraulic 44 Bushel Grain Tank w/ Discharge Auger For 927 lbs. $4,760
RNJ728-053 Hydraulic 44 Bushel Grain Tank w/ Discharge Auger For 928 lbs. $4,760
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB ATWOOD, KS
UPDATED 11/21/2016
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS