Homepage MCHALE
ROUND BALER/WRAPPER COMBINATION
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  BACK  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS  
Request Postal Mail Brochure  CONTACT  US 
800-982-1280
Email Questions or Comments


THIS  DATA  DUPLICATED  FROM  THE
MCHALE    WEB  SITE




Fusion 3 Round Baler/Wrapper Combination
Launched in September 2012. The McHale Fusion 3 integrated baler wrapper consists of an 18 roller fixed chamber baler and an integrated vertical wrapping ring.

Over the last 10 years, there has been constant pressure on Farmers and Contractors to reduce costs. In response to this McHale developed the McHale Fusion 3 integrated baler wrapper, which combines two traditionally separate jobs; namely baling and bale wrapping and integrates them into a single operation, which can be done by one man and one machine. The Fusion 3 is unique in that it has been specifically designed as a high output Integrated Baler Wrapper.

McHale is now recognised as a worldwide leader in the production and development of Integrated Baler Wrappers, its flagship product is the McHale Fusion 3.
  • New Platform and Hand Rails - for easier access to net system
  • Door Lock Tap located outside the panels on the main platform for operator convenience
  • Improved Net Storage - on main platform
  • Heavy Duty Watershield pto - with star tubing and heavy duty crosses
  • 5 Tine bar pick up - giving 25% better ground cleaning and crop transfer
  • Knife Pressure Display on control box with audible alarm
  • Knife Position Sensor - to ensure the best chop quality
  • Double Row Rotor Bearing - reducing service intervals
  • Tubular Chassis Design - to minimise crop build up
  • Additional Film Roll Holders - giving more film storage
  • LED Lights
The McHale Fusion 3 is fully automatic and one user-friendly control console in the tractor cab controls the baling and wrapping process. The McHale Fusion 3 Integrated Baler Wrapper is a robust machine, which is simply not a wrapper coupled onto a baler; it has been specifically designed as a high output Integrated Baler Wrapper. The Fusion 3 Integrated Baler Wrapper is also unique in that it has a patented bale transfer. This results in keeping the Fusion 3 short and improving the machine’s performance and output over a days work. Producing 50-60 wrapped bales an hour the single pass patented McHale bale transfer, increases productivity and reduces operation costs, while increasing profits.

Contractors and Farmers all over the world use the Fusion 3 integrated baler wrapper during their silage season in the production of round baled silage. The McHale Fusion 3 integrated baler wrapper has gained a reputation for the production of high density bales and as a result of its highly accurate vertical wrapping ring, the Fusion 3 produces very good quality silage fodder.

McHale Fusion 3 integrated baler wrappers can be seen working during the Spring and Summer months in both hemispheres, the main crops baled are grass and lucerne or alfalfa however more progressive contractors and farmers are also baling other crops. The Fusion 3 integrated baler wrapper can also be used in the production of round bales of hay and straw bales, in which case the bale wrapping table can be used to accumulate the hay or straw round bales and leave them in pairs in the field for collection. The McHale Fusion 3 integrated baler wrapper has established a reputation for the production of high density round bales of silage, hay and straw.

The McHale Fusion 3 Integrated Baler Wrapper can be seen working in over 50 countries and the Fusion 3 has become the integrated baler wrapper of choice for high output contractors and more progressive dairy farmers in - Ireland, England, Scotland, Wales, France, Germany, Austria, Switzerland, Holland, Sweden, Norway, Finland, Denmark, Poland, Hungary, Canada, USA, Korea, Australia and New Zealand.

FEATURES



The bale chamber on the McHale Fusion 3 integrated baler wrapper splits horizontally (like a clam shell) and the lower section of the bale chamber doubles as a transfer mechanism to transfer the netted bale into the vertical wrapping ring. This unique McHale patented system delivers a number of advantages over other integrated baler wrappers, namely in terms of:

  • The McHale Fusion 3 integrated baler wrapper is 5.8 metres long. Overall it is shorter and more maneuverable than the competition. This is a distinct advantage when working in small fields or hilly conditions.

  • On the McHale Fusion 3 integrated baler wrapper, the bale transfer takes place as the bale chamber is opening & closing. As the transfer occurs in one movement or step as the baler is opening and closing, the transfer does not reduce the machines output when compared with a traditional fixed chamber round baler.

  • On the McHale Fusion 3 integrated baler wrapper, the transfer occurs in one pass taking less than 10 seconds. This guarantees maximum speed and output. If the one step patented McHale bale transfer is 10 seconds faster than competing machines two step transfers, this results in a time saving of 10 minutes (assuming a production of 60 bales/ per hour).

  • On the McHale Fusion 3 integrated baler wrapper, as the bale transfer takes place the side walls of the lower section of the bale chamber support the bale and stop it from moving to the right or to the left when the Fusion 3 integrated baler wrapper is working in hilly conditions.

  • The McHale Fusion 3 integrated baler wrapper has a single pass bale transfer, which means the bale is transferred into the vertical wrapping ring as the bale chamber opens and closes, this eliminates doubling handling methods such as a secondary transfer arm or moving table between the bale chamber and the wrapping area on the machine. As a result of the single pass bale transfer on the McHale Fusions the machine is faster and more reliable as the bale does not have to be handled twice. Also output is increased as the machine does not have to pause for long periods on the swarth, as it waits for the bale transfer to take place.



On the McHale Fusion 3 Integrated Baler Wrapper the left hand side of the gearbox drives the rollers in the bale chamber, while the pick up and chopper unit are driven from the right hand side of the machine. This system ensures direct short transfer paths and optimal power distribution.



The McHale Fusion 3 integrated baler wrapper is fitted with a high capacity 2.1 metre galvanised pick up which lifts even the shortest of crop. Accurate height control can be achieved through a spring balanced hydraulic lifting system. The pick up is fitted with lateral feed augers that smoothly guide the crop into the chopping unit. The pick up features:

  • five rows of tines
  • double raced cam bearings
  • slip clutch protection
  • cam side inspection port for checking/ changing pick up bearings


A crop compression roller is also available as an optional extra on the Fusion 3. This roller evens out lumps in the swarth and minimises the risk of blockages when working in heavy swarths.



The rotor design encourages a uniform crop flow, which reduces the risk of blockage, thus maximising output. The chopping unit features 25 knives. Knives in the chopping unit are made from hardened tool steel and can be engaged and disengaged from the tractor cab. When engaged the knives extend into the spine of the rotor, which ensures a consistent chop quality.



As baling conditions are not always ideal, uneven swarths can occur which can lead to blockages. The main drive chain on the Fusion 3 integrated baler wrapper is protected by a slip clutch on the PTO.

  • Should a blockage occur, the sound of the slip clutch alerts the operator who can hydraulically lower the floor from the tractor cab.

  • This widens the feed channel, on re-engaging the PTO the blockage will be fed through.

  • The floor can then be reset and baling can resume.



The bale chamber on the McHale Fusion 3 integrated baler wrapper produces a 1.23 X 1.25 metre round bale. The heavy-duty bale chamber consists of 18 heavy-duty rollers, which are made from high-grade tubular steel. At all times the roller design ensures positive bale rotation. The roller shafts are 50mm on the drive and non drive side and are fitted with 50mm double raced bearings on main load points on the drive side.

The McHale Fusion 3 integrated baler wrapper is fitted with heavy-duty drive chains and sprockets, which ensure long life and minimum down time.

  • Drive side chains are 1-1/4 inch (20B)
  • Rotor chain is 1 inch duplex (16B-2)
  • Pick up chains are 3/4 inch (60H)


The roller ends are fitted with a McHale designed reverse thread sealing system, which ensures that any material, which tries to get into bearings, is automatically threaded out.



The bearings and chains are supported by a progressive greasing and oiling system. Each time a bale is ejected from the wrapping table on the machine, oil and grease pass through the respective progressive blocks.

The blocks measure and regulate the amount of grease and oil going to the bearings and chains. This ensures that the machine consistently delivers the correct amount of oil or grease depending on the load the components are under.

  • The chamber drive chains, rotor chain and pick up chains receive a measured amount of oil.
  • At the same time the chamber rollers on the drive and non-drive side, rotor bearings and pick up gears automatically receive a measured amount of pressurised grease.
  • After a pre-set number of bales a lube alarm will sound reminding the operator to top up the lubrication system.




The vertical wrapping ring on the Fusion 3 integrated baler wrapper is fitted with two 750mm dispensers, which take approximately 20 seconds to apply 4 layers of film and 30 seconds to apply six layers of film using both dispensers. This means the wrapping platform is always waiting for the next bale.

The dispensers are fitted with film break sensors, which notify the operator through the control box in the tractor cab if one or both dispensers run out of film. If one dispenser runs out of film the Fusion 3 will continue working and automatically slow bale rotation and increase the number of rotations of the wrapping ring to ensure that the round bale is wrapped correctly.



On the last rotation of the wrapping cycle the cut and holds extend out and the wrapping film is gently supported in the cut and hold rails, once supported the cut and hold gathers the wrapping film to one point where it is cut and held. This system makes the Fusion 3 integrated baler wrappers performance much more reliable particularly in hot or wet conditions.



The McHale Fusion 3 integrated baler wrapper is controlled by an expert plus control console, which controls baler and wrapper operation and makes it fully automatic. The expert plus control console features a large graphic display, which allows the machine operator to view graphically what stage the machine is at in the baling and wrapping cycle.

On entering a field, an operator can select from the control console, if they want:

  • the knives in the chopper unit on or off.
  • the machine to tip or hold the wrapped bale - this normally depends on ground conditions.
  • bale only programme for hay or straw - this eliminates the wrapping ring.
  • various bale transfer options depending on ground conditions.


As the Fusion 3 enters a field and moves up along the swarth, the following is the sequence of events:

  • When the bale is formed the control box beeps to signal that the bale is full.
  • The operator stops the machine on the swarth and the pre set amount of net wrap is automatically applied.
  • After the net has been cut, the bale transfer occurs automatically, when the round bale chamber closes the operator can continue baling up along the swarth.
  • The McHale Fusion 3 Integrated baler wrapper automatically wraps the bale and tips the bale when the next bale in the chamber is being netted (flat conditions) or when the operator presses the tip bale button (in hilly conditions).



Selectable knives provides the operator with three options. They can choose to engage and chop with a bank of 12 knives or a bank of 13 knives. Should fine chopping be required the operator can choose to engage both knife banks, which will give a 25 knife chopper system - capable of delivering a theoretical chop length of 46mm.

SPECIFICATIONS

Printable PDF Brochure


Fusion 3 Plus Round Baler/Wrapper Combination
The McHale Fusion 3 Plus integrated baler wrapper consists of an 18 roller fixed chamber baler and an integrated vertical wrapping ring.The McHale Fusion 3 Plus integrated baler wrapper uses Film on Film technology to apply film to the barrel of the bale in the bale chamber. The McHale Fusion 3 Plus is a fully automatic machine which is controlled by the McHale iTouch Control Unit and also has an inbuilt camera to monitor wrapper operation.

Patented Film Application

In the development of the McHale Fusion 3 Plus, McHale realised that changes in temperature and sun light could affect the chamber wrapping film, in that, as the day got hotter or cooler the film was either being overstretched or under stretched, and this in turn would cause reliability problems and result in inefficient film use.

As a result McHale developed a patented application system which adjusts the breaking force on the roll of plastic in-line with working conditions and allows for a continuously variable stretch, which can adjust to changes in the day automatically without the operator having to adjust any settings.

The McHale patent film application system ensures consistent film stretch, reliable film application, delivers optimum bale shape and bale density. Should an operator wish to use netwrap for hay or straw this can be done with a simple adjustment.

FEATURES



Film on film technology refers to the application of film to the barrel of the bale in the bale chamber. The film binds the bale together as it passes from the baler to the bale wrapper, which eliminates the need for string or net wrap. The film that binds the bale together forms a wrap layer and gives better film or plastic coverage on the largest surface of the bale.

The Advantage

  • Chamber Film Acts As A Wrapping Layer
  • The plastic which is added to the barrel of the bale to keep the bale together as the bale passes from the baler to the wrapper also forms part of the wrapping process and adds value by placing more plastic on the largest surface of the bale.

  • Chamber Film Results In Better Shaped Bales
  • When plastic is applied to the barrel of the bale it can be stretched to approximately 20%. The stretch ratio is higher than what can be achieved with net wrap or twine and as a result the material is kept tighter, which ultimately results in better bale shape.

  • Chamber Film Delivers Higher Quality Silage
  • As the plastic is being stretched as it is being applied to the barrel of the bale it expels more air than net wrap would and as a consequence results in better silage quality.

  • Chamber Film Makes Recycling Easier
  • As plastic is used to both bind the bale in the bale chamber and to wrap the bale, on feed out the farmer will be left with one form of waste. This reduces the time needed to feed the bale and avoids the unpleasant and time consuming job of separating the twine or net wrap from the plastic before the plastic is to be recycled.



The McHale Fusion 3 Plus is a fully automatic machine which is controlled by the McHale i Touch Control Unit.

The McHale "i Touch System" has a 7 inch colour touch screen monitor, which allows for increased levels of monitoring, through its colour graphic display.

The i Touch control unit also has inbuilt systems to ensure that the plastic is applied to the bale. The operator can adjust the number of layers of film of film being applied to the bale and can also adjust the stretch of the film being applied to the bale in the bale chamber from the comfort of the tractor cab.

The operator can select, if they want:

  • the knives in the chopper unit on or off
  • the machine to tip or hold the wrapped bale
  • a ‘bale only’ programme for hay or straw
  • to record multiple bale totals
  • a lube alarm
  • various bale transfer options depending on ground conditions


McHale Fusion 3 Plus - Inbuilt Camera modes

The i Touch monitor features a Camera to monitor wrapper operation.
The Inbuilt camera can work in two modes:
  • Manual Monitoring
  • At any point in the cycle the operator can switch to camera mode to view the wrapper and rear of the machine on the i Touch screen.

  • Automatic Monitoring
  • In automatic mode the camera will automatically appear on the screen at a number of pre-determined points such as, when the bale tip is pressed or when the first layers of plastic are being applied by the vertical wrapping ring.



The bale chamber on the McHale Fusion 3 Plus integrated baler wrapper splits horizontally (like a clam shell) and the lower section of the bale chamber doubles as a transfer mechanism to transfer the netted bale into the vertical wrapping ring. This unique McHale patented system delivers a number of advantages over other integrated baler wrappers, namely in terms of:

  • The McHale Fusion 3 Plus integrated baler wrapper is 5.8 metres long. Overall it is shorter and more maneuverable than the competition. This is a distinct advantage when working in small fields or hilly conditions.

  • On the McHale Fusion 3 Plus integrated baler wrapper, the bale transfer takes place as the bale chamber is opening & closing. As the transfer occurs in one movement or step as the baler is opening and closing, the transfer does not reduce the machines output when compared with a traditional fixed chamber round baler.

  • On the McHale Fusion 3 Plus integrated baler wrapper, the transfer occurs in one pass taking less than 10 seconds. This guarantees maximum speed and output. If the one step patented McHale bale transfer is 10 seconds faster than competing machines two step transfers, this results in a time saving of 10 minutes (assuming a production of 60 bales/ per hour).

  • On the McHale Fusion 3 Plus integrated baler wrapper, as the bale transfer takes place the side walls of the lower section of the bale chamber support the bale and stop it from moving to the right or to the left when the Fusion 3 integrated baler wrapper is working in hilly conditions.

  • The McHale Fusion 3 Plus integrated baler wrapper has a single pass bale transfer, which means the bale is transferred into the vertical wrapping ring as the bale chamber opens and closes, this eliminates doubling handling methods such as a secondary transfer arm or moving table between the bale chamber and the wrapping area on the machine. As a result of the single pass bale transfer on the McHale Fusions the machine is faster and more reliable as the bale does not have to be handled twice. Also output is increased as the machine does not have to pause for long periods on the swarth, as it waits for the bale transfer to take place.



On the McHale Fusion 3 Plus Integrated Baler Wrapper the left hand side of the gearbox drives the rollers in the bale chamber, while the pick up and chopper unit are driven from the right hand side of the machine. This system ensures direct short transfer paths and optimal power distribution.



The McHale Fusion 3 integrated baler wrapper is fitted with a high capacity 2.1 metre galvanised pick up which lifts even the shortest of crop. Accurate height control can be achieved through a spring balanced hydraulic lifting system. The pick up is fitted with lateral feed augers that smoothly guide the crop into the chopping unit. The pick up features:

  • five rows of tines
  • double raced cam bearings
  • slip clutch protection
  • cam side inspection port for checking/ changing pick up bearings


A crop compression roller is also available as an optional extra on the Fusion 3. This roller evens out lumps in the swarth and minimises the risk of blockages when working in heavy swarths.



The rotor design encourages a uniform crop flow, which reduces the risk of blockage, thus maximising output. The chopping unit features 25 knives. Knives in the chopping unit are made from hardened tool steel and can be engaged and disengaged from the tractor cab. When engaged the knives extend into the spine of the rotor, which ensures a consistent chop quality.



As baling conditions are not always ideal, uneven swarths can occur which can lead to blockages. The main drive chain on the Fusion 3 Plus integrated baler wrapper is protected by a slip clutch on the PTO.

  • Should a blockage occur, the sound of the slip clutch alerts the operator who can hydraulically lower the floor from the tractor cab.

  • This widens the feed channel, on re-engaging the PTO the blockage will be fed through.

  • The floor can then be reset and baling can resume.



The bale chamber on the McHale Fusion 3 Plus integrated baler wrapper produces a 1.23 X 1.25 metre round bale. The heavy-duty bale chamber consists of 18 heavy-duty rollers, which are made from high-grade tubular steel. At all times the roller design ensures positive bale rotation. The roller shafts are 50mm on the drive and non drive side and are fitted with 50mm double raced bearings on main load points on the drive side.

The McHale Fusion 3 Plus integrated baler wrapper is fitted with heavy-duty drive chains and sprockets, which ensure long life and minimum down time.

  • Drive side chains are 1-1/4 inch (20B)
  • Rotor chain is 1 inch duplex (16B-2)
  • Pick up chains are 3/4 inch (60H)


The roller ends are fitted with a McHale designed reverse thread sealing system, which ensures that any material, which tries to get into bearings, is automatically threaded out.



The bearings and chains are supported by a progressive greasing and oiling system. Each time a bale is ejected from the wrapping table on the machine, oil and grease pass through the respective progressive blocks.

The blocks measure and regulate the amount of grease and oil going to the bearings and chains. This ensures that the machine consistently delivers the correct amount of oil or grease depending on the load the components are under.

  • The chamber drive chains, rotor chain and pick up chains receive a measured amount of oil.
  • At the same time the chamber rollers on the drive and non-drive side, rotor bearings and pick up gears automatically receive a measured amount of pressurised grease.
  • After a pre-set number of bales a lube alarm will sound reminding the operator to top up the lubrication system.




The vertical wrapping ring on the Fusion 3 Plus integrated baler wrapper is fitted with two 750mm dispensers, which take approximately 20 seconds to apply 4 layers of film and 30 seconds to apply six layers of film using both dispensers. This means the wrapping platform is always waiting for the next bale.

The dispensers are fitted with film break sensors, which notify the operator through the control box in the tractor cab if one or both dispensers run out of film. If one dispenser runs out of film the Fusion 3 Plus will continue working and automatically slow bale rotation and increase the number of rotations of the wrapping ring to ensure that the round bale is wrapped correctly.



On the last rotation of the wrapping cycle the cut and holds extend out and the wrapping film is gently supported in the cut and hold rails, once supported the cut and hold gathers the wrapping film to one point where it is cut and held. This system makes the Fusion 3 Plus integrated baler wrappers performance much more reliable particularly in hot or wet conditions.



Selectable knives provides the operator with three options. They can choose to engage and chop with a bank of 12 knives or a bank of 13 knives. Should fine chopping be required the operator can choose to engage both knife banks, which will give a 25 knife chopper system - capable of delivering a theoretical chop length of 46mm.

SPECIFICATIONS

Printable PDF Brochure


Fusion Vario Round Baler/Wrapper Combination
The McHale Fusion Vario is a fully integrated baler wrapper, which consists of a high output variable chamber baler with an integrated wrapping ring. It can wrap the following bale types:

Hay/Straw
The McHale Fusion Vario has the ability to make bales of hay and straw from 0.6 metres up to 1.68 metres or from 2' up to 5' 6".

Haylage/Silage
The McHale Fusion Vario can also produce bales of haylage or silage from 1.1 metres up to 1.45 metres or 3' 3" up to 4' 8".

Standard Speficiation:
  • 2.1 metre, five tine bar pick up
  • Crop roller
  • 15 Knife chopper system with heavy duty rotor
  • Drop floor unblocking system
  • Double drive variable bale chamber
  • 3 belt bale chamber with endless belts
  • Crop flow indicators
  • Patented bale transfer delivering higher output
  • High speed vertical wrapping ring
  • i Touch control system
  • Inbuilt camera system
  • Fully automatic operation


FEATURES



As the transfer cradle moves the bale towards the wrapping ring, the wrapping roller closest to the bale chamber pivots out of the way which reduces the height the bale has to travel to get to the wrapper. This clever system saves time, as the patented system moves the bale quickly ensuring the McHale Fusion Vario delivers the highest possible output.



The McHale Fusion Vario can wrap bales from 1.1 metres up to 1.45 metres with ease. The patented tip roller adjusts its height in line with bale size to ensure the plastic always goes onto the centre of the bale, regardless of the bale diameter. This ensures the correct overlap is always achieved.



This high-speed vertical wrapping ring can apply four layers of film to a 1.25 metre bale in approximately 20 seconds or six layers of film in 30 seconds.

In normal working conditions the ever efficient wrapping process is always complete ahead of the baler, meaning that the wrapping platform is always ready and waiting to capture the next ejected bale.



On the McHale Fusion 3 Plus Integrated Baler Wrapper the left hand side of the gearbox drives the rollers in the bale chamber, while the pick up and chopper unit are driven from the right hand side of the machine. This system ensures direct short transfer paths and optimal power distribution.

  • The i Touch control console, when combined with the load sensing valve on the Fusion Vario, is capable of making baler & wrapping operation fully automatic.
  • The i Touch control console is fitted with a rear camera as standard. In automatic mode the camera image will appear at different predetermined times on the screen such as when the bale is being transferred or being tipped.



When tipping the bale the rear wrapping roller moves downwards and the Fusion Vario places its tightly wrapped bale gently on to the ground.
With the optional side tip the bale can be rotated through 90 degrees and placed on its end, thereby reducing stalk damage from crops such as Alfalfa.



The vertical wrapping ring on the Fusion Vario integrated baler wrapper is fitted with two 750mm dispensers, which take approximately 20 seconds to apply 4 layers of film and 30 seconds to apply six layers of film using both dispensers. This means the wrapping platform is always waiting for the next bale.

The dispensers are fitted with film break sensors, which notify the operator through the control box in the tractor cab if one or both dispensers run out of film. If one dispenser runs out of film the Fusion Vario will continue working and automatically slow bale rotation and increase the number of rotations of the wrapping ring to ensure that the round bale is wrapped correctly.



Film can be loaded from the left hand side of the machine. After loading film on the first dispenser, the operator can push the index button and the dispensers will then rotate around and automatically stop at the loading position for the second dispenser. This allows the operator to easily load the second roll of film.



On the last rotation of the wrapping cycle the cut and holds extend out and the wrapping film is gently supported in the cut and hold rails, once supported the cut and hold gathers the wrapping film to one point where it is cut and held. This system makes the Fusion 3 Plus integrated baler wrappers performance much more reliable particularly in hot or wet conditions.

SPECIFICATIONS

Printable PDF Brochure
ITEM # DESCRIPTION WEIGHT PRICE
MCFUS3 Fusion 3
Integrated Baler/Wrapper

Combination Baler/Wrapper, Fixed 4' X 4' Baling Chamber, 18 Roller Bale Chamber, Spit Drive Gear Box, 6' 6" Galvanized Pickup w/Crop Roller, 2 pick Up Gauge Wheels - 170/60-8, 25 Knife Selectable Chopper Unit w/Hydraulic Knife Protection, Patented Bale Transfer System, Vertical Wrapping Ring w/2-55% Stretch 30" Dispensers, Bale Side Tip, Road Lights, Drop Floor Unblocking System ( Automatic Cycle), Automatic Progrssive Greasing, Pivot Stretch Net Tie System, Expert Plus Control Box, 560/60-R 22.5 Tires. Light Loom Adapter for N.A Plug, 55% & 70% streatch gear set included.
12,100 lbs. $140,870
MCFUS3PLUS Fusion 3 Plus
Same as Fusion 3, But Also Includeds 6' 10" Galvanized Pickup, Net or Film (Film On Film) Tie System, " Itouch "
12,430 lbs. $152,573
MCFUSVARIO Fusion Vario
Same as Fusion 3 Plus, But has Variable Chamber Baler and will make bales 4' Wide and From 2' to 5' 6" Diameter, Net Tie only, 650/50R-22.5 Tires, Mudguard Extensions.
14,300 lbs. $162,178
MCASSY2 Beaver Valley Warehouse Assembly lbs. $550 NET
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB ATWOOD, KS
UPDATED 10/5/2018

  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS