ITEM # |
DESCRIPTION |
PART # |
WEIGHT |
PRICE |
F8 |
Digger, Max. Diameter Auger 30" NOTE: Unit Comes Standard with Both Cat I and Cat II Pins Below |
9050 |
320 lbs. |
$3,125 |
9051 |
Assembly Hardware Package. Allows crane boom and yoke to be mounted on most ASAE 3-pt. hitch
tractors, Category I or II pin size, Category I width only. |
9051 |
9 lbs. |
$65 |
9052 |
Assembly Hardware Package. Allows crane boom and yoke to be mounted on most ASAE 3-pt. hitch
tractors, Category II pin size, Category II width only. |
9052 |
12 lbs. |
$99 |
7480 |
Hook and Yoke Assy. Use with 9049 Crane Boom for lifting up to 750 lbs. |
7480 |
10 lbs. |
$135 |
7270 |
Auger Adaptor Guard. Furnished with Model F8. Required on all machines with 2-9/16"
round spindle with 2-3/8" diameter center column augers. |
7270 |
8 lbs. |
$34 |
9545 |
Auger Adaptor Guard. Required on all machines when using 3-5/8" diameter center
column augers. |
9545 |
9 lbs. |
$68 |
9079 |
F8 Down Force Package. Complete with relief and automatic dump valve. Also fits
Model 8700 Hydraulic Diggers. (less hoses) |
9079 |
51 lbs. |
$675 |
9049 |
Crane Boom and Yoke to convert Dearborn Model 22-1, Danuser Models F2, FA, F7U, and F7UF Diggers from either long
arm or long boom to current Crane Boom configuration for most ASAE 3-pt. hitch tractors. To be used with
9051 or 9052 Assembly Hardware Package. To use as a lifting boom, order 7480 Hook and Yoke Assembly Hardware Package.
You MUST ALSO convert any of these older diggers to our current Production Safety Standards by ordering
one of the Conversion Kits listed below to assure your customer of parts availability in the future. Danuser will NOT
knowingly sell any parts to an older digger, which has not been updated with one of the conversion kits.
When these conversions are installed, your customer will have the equivalent of a Model F8 with access to any parts
or accessories. |
9049 |
114 lbs. |
$554 |
20050 |
Conversion Kit. Used to convert any Danuser PTO Digger with 622 casting number over to the 273
pinion. The kit includes a pinion, Pinion Guard, complete guarded driveline all the way to the tractor, and a
7270 Auger Adaptor Guard for 2-3/8" diameter center column augers. This kit required on all diggers with serial numbers prior to 59,999.
|
7577 |
50 lbs. |
$593.75 |
20060 |
Conversion kit. Used to convert any Danuser PTO Digger with a 622
casting number over to the 273 pinion. This kit includes a pinion, Pinion Guard, and all parts out through
the center cross at the U-Joint on the gearbox, and a 7270 Auger Adapter Guard for 2-3/8" diameter center column
augers. This kit required on all diggers with serial numbers ranging from 60,001 to 71,199. |
7578 |
18 lbs. |
$368.75 |
7580 |
Conversion kit. Same as 7577 except comes with 9545 Auger Adaptor Guard
for 3-5/8" diameter center column augers. |
7580 |
51 lbs. |
$468.75 |
7581 |
Conversion Kit. Same as 7578 except comes with 9545 Auger Adaptor
Guard for 3-5/8" diameter center column augers. |
7581 |
19 lbs. |
$293.75 |
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FULTON, MISSOURI UPDATED 4/1/15 |