HSAR2110
Action Hay Rake | 10-60″ Wheels | Raking Width 18′-22′
$8,676.00
Action Hay Rake | 10-60″ Wheels | Raking Width 18′-22′
Back Freight: $235
Unit Includes
- 10-60″ Wheels
- Kwik Pik Feature (Immediate windrow clearance at end of field)
- Dual Cylinders For Single Side Raking
- 205-75D15 Tires
| 2108 | ||
|---|---|---|
| NUMBER OF RAKE WHEELS | 8 | |
| WHEEL DIAMETER | 60″ | |
| TEETH PER WHEEL | 40 | |
| TOOTH DIAMETER | 7.5mm | |
| RAKE WHEEL HUBS | Tapered Bearings | |
| TRANSPORT WIDTH | 10′ | |
| TRANSPORT LENGTH | 17′ | |
| TRANSPORT HEIGHT IN TRANSPORT POSITION | 86″ | |
| RAKING WIDTH | 15′ – 19′ | |
| WINDROW WIDTH ADJUSTMENT | 3′ – 5′ | |
| NO. OF RAKING POSITIONS W/TRANSPORT POSITION | 6 | |
| GROUND PRESSURE RAKE WHEEL ADJUSTMENT | Adjustable Tension Spring | |
| ACTION CYLINDER – RAISE/LOWER | 4 ½″ | |
| WING CYLINDERS | 2″ | |
| JACK | Standard | |
| WEIGHT | 1,400# | |
| CENTER KICKER WHEEL | N/A | |
| 2110 | ||
|---|---|---|
| NUMBER OF RAKE WHEELS | 10 | |
| WHEEL DIAMETER | 60″ | |
| TEETH PER WHEEL | 40 | |
| TOOTH DIAMETER | 7.5mm | |
| RAKE WHEEL HUBS | Tapered Bearings | |
| TRANSPORT WIDTH | 10′ 8″ | |
| TRANSPORT LENGTH | 19′ | |
| TRANSPORT HEIGHT IN TRANSPORT POSITION | 101″ | |
| RAKING WIDTH | 18′ – 22′ | |
| WINDROW WIDTH ADJUSTMENT | 4′ – 6′ | |
| NO. OF RAKING POSITIONS W/TRANSPORT POSITION | 10 | |
| GROUND PRESSURE RAKE WHEEL ADJUSTMENT | Adjustable Tension Spring | |
| ACTION CYLINDER – RAISE/LOWER | 4 ½″ | |
| WING CYLINDERS | 2″ | |
| JACK | Standard | |
| WEIGHT | 1,670# | |
| CENTER KICKER WHEEL | Optional | |
| 2112 | ||
|---|---|---|
| NUMBER OF RAKE WHEELS | 12 | |
| WHEEL DIAMETER | 60″ | |
| TEETH PER WHEEL | 40 | |
| TOOTH DIAMETER | 7.5mm | |
| RAKE WHEEL HUBS | Tapered Bearings | |
| TRANSPORT WIDTH | 12′ | |
| TRANSPORT LENGTH | 21′ 6″ | |
| TRANSPORT HEIGHT IN TRANSPORT POSITION | 105″ | |
| RAKING WIDTH | 20′ – 24′ | |
| WINDROW WIDTH ADJUSTMENT | 4′ – 6′ | |
| NO. OF RAKING POSITIONS W/TRANSPORT POSITION | 10 | |
| GROUND PRESSURE RAKE WHEEL ADJUSTMENT | Adjustable Tension Spring | |
| ACTION CYLINDER – RAISE/LOWER | 4 ½″ | |
| WING CYLINDERS | 2″ | |
| JACK | Standard | |
| WEIGHT | 1,860# | |
| CENTER KICKER WHEEL | Optional | |
Features
- High Clearance Action Rakes features a “KWIK PIK” (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
- An Adjustable Hitch allows you to level the rake for efficient raking.
- Right and left side raking is done easily by turning either one of the wing transport valves off.
- A 49″ Center Kicker Wheel is optional on all Action Rakes.
- The hitch jack is used to adjust the windrow width as shown.
- Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
- The operator can adjust the fine tune spring to allow proper rake wheel down pressure on each arm of either rake.
| HSAROCKW | Center Kicker Wheel w/Linkage, Operated 49″ Wheel |
| HSBFOWP60 | Wind Panel Kit for 60″ Wheels, 36.5″ Diameter |
| HSHTCHBL | Ball Hitch, 2-5/16″ Ball |
| HSAROLIGHT | Taillight Option, Action Rake |
______________________________________________________________________________________________________________________________________________________________________________________________________
PRICES DO NOT INCLUDE SHIPPING OR SETUP – PRICED F.O.B. FACTORY
| Weight | 1670 lbs |
|---|