Meyer Contractor 17000 Series Drive Pro Plow Kit: Hyd System, Frame, Lights, & E73H Pump
To maximize fuel economy while reducing carbon emissions, manufacturers of 1/2-ton pick-ups are making pick-ups lighter and lighter. To complement this trend, Meyer has developed the industry’s first commercial snow plow made of lightweight, high-strength steel.
The Meyer Drive Pro is now available in two different grades of steel: traditional and lightweight, high-strength. Both offer great performance features. The lightweight, high-strength steel models (part #41189 for 1/2-ton pick-ups and part #41130 for SUVs) have also been redesigned to offer industry-leading ground clearance of up to nine inches. Known as the Standard Operating System, not only will you get better gas mileage, the plow will also be less prone to bottoming out while in carry mode.
___________________________________________________________________________________________________________________________________________________________________________
The Following Must Be Added To Complete The Drive Pro Plow:
MEY09499 | Meyer 6’8” Drive Pro Moldboard |
MEY09498 | Meyer 7’6” Drive Pro Moldboard |
Truck Mounting Kit | Meyer Truck Mounting Kit |
___________________________________________________________________________________________________________________________________________________________________________
Technical Data
Blade Model #:6′ 8″ Drive Pro | Blade Type:Steel Full Trip | Moldboard Length:6′ 8″ | Moldboard Height:22.5″ |
Moldboard Gauge:14 ga | Vertical Ribs:6 | Plow Trip Springs:2 | Cutting Edge:3/8″ x 6″ |
Avg Width at Full Angle:72″ | Angling Rams:1-1/2″ x 10″ | Weight Complete:370 lbs |
Blade Model #:7′ 6″ Drive Pro | Blade Type:Steel Full Trip | Moldboard Length:7′ 6″ | Moldboard Height:22.5″ |
Moldboard Gauge:14 ga | Vertical Ribs:6 | Plow Trip Springs:2 | Cutting Edge:3/8″ x 6″ |
Avg Width at Full Angle: | Angling Rams:1-1/2″ x 10″ | Weight Complete:380 |
___________________________________________________________________________________________________________________________________________________________________________
Performance
Plowing driveways in a full size pickup can be a challenge, that’s why the Drive Pro is engineered to be a lightweight, commercial-grade plow designed to provide optimal maneuverability in tight residential settings. The Drive Pro attaches or detaches in well under a minute with the pull of one handle; and once attached, you don’t need to leave the vehicle to angle the plow.
Dura-Slick Paint With Teflon®
All Meyer carbon steel moldboards are painted with Meyer Dura-Slick™ Paint. This automotive-style paint with Teflon® is baked on to the steel for durability and better snow-rolling action. It’s the reason why Meyer plows throw snow farther and move it faster than the competition.
Field Adjustable Trip Springs
While out plowing, contractors often need to make adjustments to their plow, and they dont want to go back to the shop to do it. That is why Meyer makes their plows with field adjustable trip springs. This allows more time to plow and less time back at the shop.
___________________________________________________________________________________________________________________________________________________________________________
Reliability
In the snow plowing business, downtime is not an option. That’s why the Meyer Drive Pro is built using Reliable Over-time Construction (ROC)… the detailed things we do to make our plows more rugged and reliable. ROC is the result of manufacturing improvements and state-of-the-art technology combined with stringent quality control procedures.
Slot And Tab Construction
Meyer couldn’t offer the industry’s best warranty on our plows if we didn’t build them using slot and tab construction. This method of construction makes for a stronger, more precise fitting plow. Laser cut steel components are assembled using robotic welders that never tire and never make a mistake. It’s why every plow comes off the line ready to provide years of trouble-free service.
Continuously Welded Ribs
Meyer plows are continuously welded on the outside ribs. This Meyer exclusive not only gives our plows a more rugged look, but more importantly, it increases their strength and performance so they can handle anything Mother Nature sends their way.
Pre-Drilled Deflector Holes
Meyer Drive Pro moldboards are manufactured with pre-drilled holes which make it easy to add a snow deflector. This means you save time when adding this important safety feature that keeps snow from impairing your view through the windshield. Since they are pre-drilled at the factory, the holes are sealed with Dura-Slick paint to help prevent rust.
___________________________________________________________________________________________________________________________________________________________________________
STANDARD OPERATING SYSTEM
Industry-Leading Ground Clearance
The Standard Operating System offers up to 9” of ground clearance for improved stacking and transport height. You’ll carry your plow high and be less prone to bottoming out.
Durable And Reliable System Featuring Nite Saber III Lights
The Standard Operating System’s lift frame and light bar offer greater rigidity and stability. Plus the tubular-steel a-frame offers greater durability. The Standard Operating System features Nite Saber III lights which are fully adjustable and iso-mounted to resist vibration. They also feature weathertight three seal plugs, easy-to-replace dual halogen bulbs, wrap-around turn signals and an internal bracket for durability.
Encased Power Unit With Adjustable Drop Speed
The Standard Operating System has a streamlined appearance with an encased power unit and patented cable management system for reliable service. It also features an adjustable drop speed for varying plowing conditions and preferences.
Easy-To-Use Controller
The Standard Operating System is controlled using a pistol grip controller featuring Hands-Free plowing, one-button functionality and diagnostics.
___________________________________________________________________________________________________________________________________________________________________________
Accessories
6’8″ Blade
ME09277 | 6’8″ Steel Cutting Edge (Standard on Blade) |
MEA08236 | 6’8″ Rubber Cutting Edge |
MEA08277 | 6’8″ Urethane Cutting Edge |
MEA13071 | 6’8″ Molded Deflector |
MEA08107 | 6’8″ Rubber Deflector |
7’6″ Blade
ME09796 | 7’6″ Steel Cutting Edge (Standard on Blade) |
MEA08189 | 7’6″ Rubber Cutting Edge |
MEA09224 | 7’6″ Urethane Cutting Edge |
MEA12039 | 7’6″ Molded Deflector |
MEA08109 | 7’6″ Rubber Deflector |
MEA12078 | 7’6″ Poly Deflector |
All Models
MEA08344 | Curb Guards (Set of 2) |
ME15902 | Meyer M2 Hydraulic Flush (Case/12) |
ME15487 | Meyer M1 Hydraulic Fluid (Case/12) |
ME08677 | Meyer Sno-Flo Industrial Yellow Paint (Spray Can) |
ME22799 | Joystick Cradle Mount |
ME22798 | Pistol Grip Cradle Mount |
ME22815 | 45-Degree Cradle Adapter |
ME22801 | Floor Mount (Works with all Controllers) |
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY