TRBDR-210

Tar River 6’9″ Drum Mower | CAT II & III | 65 Min HP | 4 Blades Per Drum | Hyd Lift

$7,224.00

Weight: 1240lbs

Tar River 6’9″ Drum Mower With Hyd Lift | CAT II & III | 65 Min HP | 4 Blades Per Drum

*PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB BV ATWOOD, KS 

 

Tar River Drum Mowers

With very few moving parts, low maintenance and a heavy built frame, the Tar River Drum Mower is a great economic alternative to the Disc and Sicklebar Mowers while still giving a good cut. The BDR Series Drum Mower can mow at high speeds and offer reliable mowing in all conditions, easily cutting through tall and thick grasses. Available in 4 popular sizes, Tar River Implements has a perfect fit for your small hay operation.

Benefits Of Using A Tar River Drum Mower
– Mow at High Speeds
– No Hydraulics Necessary (unless using Hydraulic Conversion Kit)
– Few Moving Parts & Easy Maintenance
– Great Alternative to Disc & Sicklebar Mowers for Small Hay Producers
– Easily Cuts Through Tall & Thick Grass
– Designed for Reliable Mowing in All Conditions

Features
– Heavy Duty A-Frame
– Compensation Spring “Break-Away” System
– High Blade Tip Speed for Smooth, Fast Cutting Efficiency
– Easy & Quick Blade Change
– 4 V-Belts & 3 Blades Per Drum*

*BDR-135 comes with 3 V-Belts & 2 Blades per Drum
*BDR-210 comes with 4 V-Belts & 4 Blades per Drum

Adjusting The Height Of Cut

Each unit comes with a 8mm standard height spacer ring which gives the unit a standard cut height of 40mm. You may add, subtract, or substitute spacers to achieve your desired height of cut. Cut heights must stay between 32mm – 48mm.

To adjust the cutting height, the following must be done:

  1. Position the mower to the transport position and lift it to the upper position.
  2. Set the tractor’s handbrake and disengage the tractor’s engine.
  3. Secure the mower from falling with a chain and an additional support placed under one of the stump jumper disks.
  4. Unscrew the bolts M12x25 (Position 1 in Drawing 3) and disassemble the stump jumper (Position 2 in Drawing 3).
  5. Unscrew the resistance disc bolts (Position 3 in Drawing 3) M12x30 and take it off.
  6. Adjust the cut height and assemble it in the reversed order.
  7. Perform the adjustment in the other stump jumper disc repositioning the support.

TRDM10556-5

Cutting Height Spacer | 5 mm $9.00
Add to List

TRDM10556-8

Cutting Height Spacer | 8 mm $9.00
Add to List
Weight 1240 lbs