Westfield 10″ X 53′ MKX Auger | Low Profile Hopper | 540 PTO | Up To 6,600 BPH
Auger Is Pictured Above With Optional Powerswing
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY
Shipped Complete With
- Shielded CV-PTO Driveline With Overload Shear Bolt
- Hydraulic Lift Cylinder With Hoses & Shut Off Valve
- Standard Low Profile Feed Hopper With Drive
- Hopper Lift Winch
- Intake Boot Hopper With Towbar & Hitch Jack
- Tractor End Hydraulic Couplers
- 15″ Tires Mounted On Rims
MKX 100 Series
MKX100 | up to 6,600 bph | 53′- 83′ lengths
The MKX Series features over 75 proven performance enhancements, specializing in ease-of-use and serviceability. The MKX Series is available in 10″, 13″ and 16″ tube diameters and lengths from 53′ to 125′ and capacity up to 23,000 bph.
Built Strong & Lasts Long
Westfied developed Wear Edge Technology™ to extend the life of the flighting. This provides an extra layer of steel welded to the edge on critical wear points. As a result, flighting lasts longer and needs to be replaced less often – saving time and money. To protect the finish and prevent rusting, Westfield uses a durable powder coat paint.
Smooth & Efficient Operation
The MKX Series uses square, one-bolt flight connections to ensure the flighting maintains proper alignment for smooth operation. The upper flight thrust adjuster equalizes the pressure between the upper and lower bearings during operation. This extends the life of the lower boot bearing. The CV PTO reduces vibration and provides maximum power transfer to the auger in order to maintain the life of the unit without sacrificing capacity. The large boot and tapered boot flight maximizes auger capacity at all angles by efficiently channeling grain from the hopper into the auger.
Easy To Service & Maintain
The removable slip-on boot flight uses Wear Edge Technology™ and can be quickly replaced without having to remove and replace the entire lower flight. The MKX Series features six easily accessible service points to allow for quick maintenance of u-joints, chains, bearings, and gearboxes. The u-joint end caps have external grease zerks, making it easy to service and maintain. Tool free inspection areas include, the hopper chain cover, neck transition, boot clean-out and swing head cover. The large clean-out, service points, and access panels allow for fast and efficient auger cleaning and servicing.
Trussing + Frame
The MKX Series is designed to maintain rigid alignment during heavy loads. Whether it’s heavy-duty cable trussing on smaller units or Westfield’s industry-leading steel trussing on longer, heavier units, the MKX withstands bowing to maintain proper tube and flighting alignment making it easier to line the auger up with the bin cap opening. The A-frame undercarriage is built to hold the auger in position and works with wide-standing axles to prevent the auger from swaying or moving once it has been positioned at the bin and the grain starts flowing.
Hopper + Hopper Lift Arm
The low profile hopper features left and right hand flighting to pull grain toward the center of the hopper so it flows efficiently up into the tapered boot – maximizing capacity and minimizing unload time. The 6″ rubber extension along the edge of the hopper prevents grain from splashing. The hopper lift arm and hopper can be positioned on the left or right hand side of the auger, offering the convenience of unloading from either side. Low Profile Hopper also has easy access drive components & u-joints with external grease zerks for maintenance.
Sealed Spout & Boot
The MKX Series has a sealed spout and boot with improved access panels & cleanout.
Square Shaft Flighting
The MKX Series has square shaft flighting connections with a removable & replaceable boot flight.
Westfield Auger Calculators
Formula for calculating the length of auger required to fill a bin:
STEP #1: Determine distance (H) from ground to eave of bin.
STEP #2: Add distance from Step #1 to 1/2 of bin diameter (D).
STEP #3: Multiply total figure from step 2 by 1.4.
STEP #4: The figure determined in Step 3 is the exact length of auger needed. Use the next longer length of Westfield Auger
(H + 1/2D) x 1.4= Auger Length
Gas Motor RPM=3,000 Electric Motor RPM=1,750
(Top Sprocket/Bottom Sprocket) x (Motor Pulley/Auger Pulley) x Motor RPM = Flight Speed
- MKX100 Accessories
10" X 3' Long Galvanized Flex Hose
10" X 5' Long Galvanized Flex Hose
Westfield 10" Corn Screen | Screen Installed On Incline Tube Or Main Auger Lower Tube | FACTORY INST
Westfield Standard Hopper Tarp | Fits: MK80 & MK/MKX100 Standard Hoppers
Westfield Poly Bucket Flex Spout | 36" - 5 Sections | Fits 8" - 10" Augers
Westfield Low Profile Hopper Tarp | Fits: MK/MKX100 & MK/MKX130 Augers
Westfield Reflector Kit | For MK/MKX61-84
Westfield MK/MKX100 Remote Electric Power Swing | Single Motor
Westfield MK/MKX100 Hydraulic Power Swing | Single Motor
Additional Remote Control
Westfield No Snag Poly Flex Spout | 3-Section | Fits 10" Augers
Westfield MKX100 Reverser Kit | Reverses Flighting For Quick & Easy Cleanout
Westfield Right Angle Drive | For: MKX100 | Not For Use With Rev. Kit | Short PTO Credit Avail
Westfield MKX100 Hyd Hopper Lift Kit | Min 1200PSI - Max 2500 PSI | Min Hyd Flow 4.0 GPM
Westfield MKX 100 Standard Hopper Assembly
MKX100 Low Pro Hopper Assembly Complete
MKX1063 Work Light Kit
MKX1073 Work Light Kit
MKX1083 Work Light Kit
Westfield MKX100 Hydraulic PowerSwing | Double Motor | Landing Gear Mounting
Westfield MKX100 Electric PowerSwing | Double Motor | Landing Gear Mounting
RETURN CREDIT For PTO Shaft (Blue) | For MKX100-53/63/73 & MK80/100
*Credit for MKX100-83 & MK100-81/91 PTO Shaft (White)