Westfield MKX13″ X 74′ Gulp 2 Auger
Shipped Complete With:
- Shielded CV-PTO driveline equipped with overload shear bolt(s)
- Dual hydraulic lift cylinders with improved shut – off valve
- Gulp 2 Hopper
- Hopper lift system
- 16″ tires mounted on rims are standard
- Hydraulic tractor end couplers
13″ Diameter | 64′ – 114′ Lengths | Up To 11,000 bph
The MKX Series features over 75 proven performance enhancements, specializing in ease-of-use and serviceability. The MKX Series is available in 10″, 13″ and 16″ tube diameters and lengths from 53′ to 125′ and capacity up to 23,000 bph.
MKX Series Features
Built Strong & Lasts Long – Westfied developed Wear Edge Technology™ to extend the life of the flighting. This provides an extra layer of steel welded to the edge on critical wear points. As a result, flighting lasts longer and needs to be replaced less often – saving time and money. To protect the finish and prevent rusting, Westfield uses a durable powder coat paint.
Smooth & Efficient Operation – The MKX Series uses square, one-bolt flight connections to ensure the flighting maintains proper alignment for smooth operation. The upper flight thrust adjuster equalizes the pressure between the upper and lower bearings during operation. This extends the life of the lower boot bearing. The CV PTO reduces vibration and provides maximum power transfer to the auger in order to maintain the life of the unit without sacrificing capacity. The large boot and tapered boot flight maximizes auger capacity at all angles by efficiently channeling grain from the hopper into the auger.
Easy To Service & Maintain – The removable slip-on boot flight uses Wear Edge Technology™ and can be quickly replaced without having to remove and replace the entire lower flight. The MKX Series features six easily accessible service points to allow for quick maintenance of u-joints, chains, bearings, and gearboxes. The u-joint end caps have external grease zerks, making it easy to service and maintain. Tool free inspection areas include, the hopper chain cover, neck transition, boot clean-out and swing head cover. The large clean-out, service points, and access panels allow for fast and efficient auger cleaning and servicing.
Trussing + Frame – The MKX Series is designed to maintain rigid alignment during heavy loads. Whether it’s heavy-duty cable trussing on smaller units or Westfield’s industry-leading steel trussing on longer, heavier units, the MKX withstands bowing to maintain proper tube and flighting alignment making it easier to line the auger up with the bin cap opening. The A-frame undercarriage is built to hold the auger in position and works with wide-standing axles to prevent the auger from swaying or moving once it has been positioned at the bin and the grain starts flowing.
Sealed Spout & Boot – The MKX Series has a sealed spout and boot with improved access panels & cleanout.
Square Shaft Flighting – The MKX Series has square shaft flighting connections with a removable & replaceable boot flight.
Westfield Gulp 2 Hopper
The GULP2 Drive Over Hopper is the most efficient grain auger accessory on your farm. The GULP2‘s ultra-low profile allows for efficient and quick truck unloading for on-farm applications.
The GULP2 is an ultra-low profile drive over hopper that transports with a 13″ Westfield swing auger. It removes the need to re-attach or re-position multiple pieces of equipment when unloading trucks and trailers. The drive over unit hydraulically lowers and swings into position while the one-touch ramp deployment provides easy setup in minutes. Compatible with almost all trucks, this drive over hopper is only 4.5″ high and features a large catchment area and revolutionary chevron belt to auger transition.
MKX GULP2 – The first practical and economical drive over belt hopper that can transport with your MKX swing auger. This hopper uses innovative technology to operate at only 4.5 inches high while creating a large catchment area to unload all types of trucks and trailers. The hopper features a powerful hydraulic motor, chevron belt and hydraulic power swing to save time in all grain handling applications. It’s not just a swing auger…it’s a Westfield.
|WF21638||Closed Center Plug for GULP2|
|WFA262||MKX 1000 RPM Reducer/Reverser|
|WFA175||Poly Bucket Flex Spout 49″-5 section, fits 13″ augers|
|WFA283||No Snag Poly Flex Spout, 3-section, fits 13″ augers|
|WFA193||Reflector Kit, MK/MKX61-84|
|WFA263||MKX 130 Reverser Kit|
|WFA185||13″ CORN SCREEN WITH COVER|
|WFA267||MKX130 Right Angle Drive|
|UMH14-3||14″ x 3′ Long Galvanized Flex Hose|
|UMH14-5||14″ x 5′ Long Galvanized Flex Hose|
|WFA351||MKX130-74 Working Light Kit|
Formula for calculating the length of auger required to fill a bin:
STEP #1: Determine distance (H) from ground to eave of bin.
STEP #2: Add distance from Step #1 to 1/2 of bin diameter (D).
STEP #3: Multiply total figure from step 2 by 1.4.
STEP #4: The figure determined in Step 3 is the exact length of auger needed. Use the next longer length of Westfield Auger
(H + 1/2D) x 1.4= Auger Length
Back Freight: $798.72
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY