APV
Auger Torque
Baumalight
Big John
Bison
Brush Chief
Cammond
Cimarron
Danuser
Degelman
Elston
Enorossi
Epiroc
Exothermic
Garfield
Greenscape
Ground Hog
Hackett
Herd
H&S
Kasco
Legend
Louisiana / Pit Boss
Martatch
Maschio
MK Martin
Monroe Tufline
Ogden
Remlinger
Rhino
Speeco
Tar River
Wallenstein
Westfield
Worksaver
Big Foot
Dalbo
GoLight
ABM Warranty
WLBX102RPI-CAMO
Wallenstein BX102RPI Chipper | CAT II | 10″ Dia | Hyd Feed Roller Lift | P3 Pulse Intel | Winch
$22,540.00
Weight: 2000lbs
BX102RPI Chippers
With a PTO powered rotor and hydraulic feed hopper, branches, limbs and brush up to 10″ in diameter are control fed for continuous chipping at maximum capacity.
| Chipping Capacity: | 10″ (25 cm) |
|---|---|
| On-Board Intelligence: | P3 Pulse™ |
| Chipper Type: | Disc |
| Feed System: | Dual Hydraulic Roller Feed |
| Engine HP Range: | 75 – 120 |
| Required Hydraulic Flow: | 4 – 8 gpm (15 – 30 lpm) |
| Chipper Hopper Opening: | 30″ x 42″ (76 cm x 107 cm) |
| Chipper Rotor Opening: | 10″ x 17″ (25 cm x 43 cm) |
| Number Of Chipper Knives: | 4 |
| Rotor Diameter: | 36” (92 cm) |
| Rotor Weight : | 425 lbs (193 kg) |
| Discharge Chute Height: | 100″ (253 cm) |
| Discharge Chute Rotation: | 360° |
| Winch Pulling Capacity: | 1200 lbs (545 kg) |
| Winch Rope Length: | 50′ (15 m) |
| Winch Rope Diameter: | 1/4″ (6 mm) |
| Drive System: | PTO Direct Drive |
| Rated RPM: | 540 – 1000 |
| PTO Height: | 34″ (86 cm) |
| Total Weight: | 2100 lbs (953 kg) |
| Dimensions Open (LxWxH): | 108″ x 85″ x 100″ (273 cm x 215 cm x 253 cm) |
| Dimensions Folded (LxWxH): | 85″ x 71″ x 100″ (215 cm x 180 cm x 253 cm) |
| Mounting System: | Cat II, iMatch™ & Quick Hitch Compatible |
Control the output of the chipper with the easily adjustable chute allowing the user to direct the flow of chips where they want. Angling the log against the rotor requires less horsepower to chip, saving fuel. Hydraulically powered top and bottom feed rollers grip and pull brush directly into the chipper. For easy transport. No tools required. Extra large chipper intake backed up by extra large rotor spinning with high momentum. Extra large chipper intake easily receives crooked branches, reducing the amount of prior trimming required. The P3 Pulse controller is designed to enhance the machines power, performance, and productivity. The discharge chute is equipped with a positional discharge deflector on the end of the chute to direct the chips exactly where desired. Threaded eyebolts allow positive fine positioning of ledger plate. Standard reversible rotor knives double the longevity of your knives. Move on from a power spike by simply replacing a single shear bolt. The discharge paddle passes around the twig breaker and helps to break the material into smaller pieces and turn it into mulch. Hydraulic cylinder lifts the top roller then applies 2600 lbs of crush force to start the log through the chipping cycle. 1200 lbs pulling force along with a 50’ synthetic rope makes it very easy to winch in your heavy log.
| Weight | 2000 lbs |
|---|