APV
Auger Torque
Baumalight
Big John
Bison
Brush Chief
Cammond
Cimarron
Danuser
Degelman
Elston
Enorossi
Epiroc
Exothermic
Garfield
Greenscape
Ground Hog
Hackett
Herd
H&S
Kasco
Legend
Louisiana / Pit Boss
Martatch
Maschio
MK Martin
Monroe Tufline
Ogden
Remlinger
Rhino
Speeco
Tar River
Wallenstein
Westfield
Worksaver
Big Foot
Dalbo
GoLight
ABM Warranty
WLBX52R-CAMO
Wallenstein BX52R Chipper | CAT I | 5″ Capacity | Hyd Feed Hopper | Flow Control
$9,230.00
Weight: 845lbs
BX52R Chippers
With a PTO powered rotor and hydraulic feed hopper, branches, limbs and brush up to 5″ in diameter are control fed for continuous chipping at maximum capacity.
| CHIPPING CAPACITY: | 5″ (13 cm) |
|---|---|
| CHIPPER TYPE: | Disc |
| FEED SYSTEM: | Dual Hydraulic Roller Feed |
| ENGINE HP RANGE: | 40 – 55 |
| REQUIRED HYDRAULIC FLOW: | 3 – 6 gpm (12 – 23 lpm) |
| CHIPPER HOPPER OPENING: | 35″ x 30″ (89 cm x 76 cm) |
| CHIPPER HOUSING OPENING: | 5″ x 10″ (13 cm x 26 cm) |
| NUMBER OF CHIPPER KNIVES: | 4 |
| ROTOR DIAMETER: | 25″ (63 cm) |
| ROTOR WEIGHT : | 125 lbs (57 kg) |
| DISCHARGE CHUTE HEIGHT: | 74″ (188 cm) |
| DISCHARGE CHUTE ROTATION: | 360° |
| DRIVE SYSTEM: | PTO Direct Drive |
| RATED RPM: | 540 – 1000 |
| PTO HEIGHT: | 22″ – 27″ (55 cm – 69 cm) |
| TOTAL WEIGHT: | 845 lbs (384 kg) |
| DIMENSIONS OPEN (LXWXH): | 80″ x 67″ x 74″ (204 cm x 171 cm x 188 cm) |
| DIMENSIONS FOLDED (LXWXH): | 62″ x 61″ x 74″ (158 cm x 155 cm x 188 cm) |
| MOUNTING SYSTEM: | Cat I, iMatch™ & Quick Hitch Compatible |
Control the output of the chipper with the easily adjustable chute allowing the user to direct the flow of chips where they want.
Adjust the chipper height to match the PTO height on your tractor.
Angling the log against the rotor requires less horsepower to chip, saving fuel.
Keeps wood chips from getting into the bearing and causing damage.
Easily attach to your tractor without leaving your seat.
Hydraulically powered top and bottom feed rollers grip and pull brush directly into the chipper.
For easy transport. No tools required.
Extra large chipper intake easily receives crooked branches, reducing the amount of prior trimming required.
Extra large chipper intake backed up by extra large rotor spinning with high momentum.
The discharge chute is equipped with a positional discharge deflector on the end of the chute to direct the chips exactly where desired.
Threaded eyebolts allow positive fine positioning of ledger plate.
Standard reversible rotor knives double the longevity of your knives.
Forward/reverse control with two stop positions.
Move on from a power spike by simply replacing a single shear bolt.
The discharge paddle passes around the twig breaker and helps to break the material into smaller pieces and turn it into mulch.
| Weight | 845 lbs |
|---|