CF572 Brush Cutter | Open Front | 82″ Path-72″ Blade Width | M450 Motor | 12-22 GPM | 4 Blades
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB BV ATWOOD, KS
*NO Case Drain Required
*Hoses & Couplers Included
CF572 Open Front Skid Steer Rotary Brush Cutter Model
The rugged frame of the CF572 heavy-duty rotary brush mower houses four AR400 blades featuring an 82″ path width. The 1/4” steel deck is designed to stand up and perform in rough terrain while cutting trees, brush, unwanted weeds and grass. The 72″ wide open mouth of this unit allows you to cut down larger trees in a sawing action.
Standard on the 500 series rotary bush mower, the Brush Bar helps to funnel brush under the Brush Cutt to the AR400 blades. The double arch design of the push bar works to pull the taller, heavier brush to the hardened blades, making quick work of woody brush and saplings. The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits as you break new trails, clear ditches, construction, property sites, and other overgrown areas.
Model No. | CF360 | CF372 | CF560 | CF572 | CSC744 | CSC760 |
---|---|---|---|---|---|---|
Available Motor Options | M450, M550, M650 | M450, M550, M650 | M450, M550, M650 | M450, M550, M650 | HS430,HS450,HS490 | C790 |
Recommended GPM | Check Motor Options | Check Motor Options | Check Motor Options | Check Motor Options | Check Motor Options | Check Motor Options |
Maximum Brush Size | 2″ | 2″ | 4″ | 4″ | 10″ | |
Discharge Protection | Link Chain Curtain Front and Back |
Link Chain Curtain Front and Back |
Open Front with Push Bar Link Chain Curtain on Back | Open Front with Push Bar Link Chain Curtain on Back | Double chain on back | Double chain on back |
Path Width | 70″ | 82″ | 70″ | 82″ | 57″ | 72″ |
Cutting Width | 60″ | 72″ | 60″ | 72″ | 44″ | 60″ |
Low Cutting Height | 2.5″ | 2.5″ | 2.5″ | 2.5″ | 1/2″ | 1/2″ |
Number of Blades | 2 | 2 | 4 | 4 | 20 pcs R7000 | 30 pcs R7000 |
Attachment Type | Universal Skid-Steer Plate | Universal Skid-Steer Plate | Universal Skid-Steer Plate | Universal Skid-Steer Plate | Universal Skid-Steer Plate | Universal Skid-Steer Plate |
Maximum HP | Check Flow & PSI on Skid Steer | Check Flow & PSI on Skid Steer | Check Flow & PSI on Skid Steer | Check Flow & PSI on Skid Steer | Check Flow & PSI on Skid Steer | Check Flow & PSI on Skid Steer |
Min Carrier Weight | 4,000 lb | 4,500 lb | 4,500 lb | 5,000 lb | 5,500 lb | 7,000 lb |
System Protection | Built In Hydraulic | Built In Hydraulic | Built In Hydraulic | Built In Hydraulic | Built In Hydraulic | Built In Hydraulic |
Dimensions (LxWxH) | 88″x72″x36″ | 90″x84″x36″ | 88″x72″x36″ | 90″x84″x36″ | 88″x75″x67″ | |
Deck Structure | 1/4″ steel | 1/4″ steel | 1/4″ steel | 1/4″ steel | 1/4″ T1 Steel | 1/4″ T1 Steel |
Unit Weight | 1342 lbs. | 1390 lbs. | 1540 lbs. | 1570 lbs. | 2000 lbs. | 2850 lbs. |
TWO CUTS PER PASS
As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Brush Cutt advances forward. The curved cutting tips of the slasher blades give the Brush Cutt two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in either 2 or 4 blade configurations the Brush Cutt’s reversible/replaceable blades are made of long lasting 1/4″ AR 400 steel.
GEAR BOX
Standard on all Brush Cutt models is a relief valve. Set at 3,000 psi, this valve disengages the driveline if the hydraulic system pressure is too great, thereby protecting both the skidsteer and the Brush Cutt.
The Brush Cutt uses a bevel gearbox capable of handling up to 90HP for final drive output. More durable than conventional direct drive setups, these gearboxes prevent shocks from cutting being passed to the drive motor.
HOSE ARMOUR
Standard on all Brush Cutt models is Hose Armour. This is a tough wrap which coils around the hoses and protects them from the harsh environment of brush cutting. The armour helps to prevent any punctures from fallen brush or trees.
SLASHER BLADES
Crafted from 1/4″ AR 400 steel, the unique profile of the slasher blades provides increased cutting surface. The blade’s thin reversible profile continuously provides a sharp edge.
BLADE MOUNT
To secure slasher blades to the blade assembly, Baumalight uses Gr. 8 bolts capped off with castle nuts and cotter pins. The blade mount uses a fully welded collar to drop the blade; this spacing helps to reduce the blade from binding while in operation.
4-WAY MODEL
Designed for easy service, the four-way models feature a heavy-duty rotor with four fixed extensions. Each extension is finished off with a slasher blade. This configuration is capable of providing up to 52 slashes per second.
CHAIN CURTAIN
A heavy duty chain curtain reduces discharge of debris. Unlike traditional chain curtains Baumalight’s Brush Cutt utilizes a curtain rod setup that is free of welds. This setup allows the chain to absorb the impacts and places less strain on the welded link for longer curtain life.
ROTOR
Using a 3/4″ top plate and a 3/8″ bottom plate, this heavy duty rotor sandwiches the four–way blade assembly in place.
SHIELD
To protect the output shaft from impact or contamination caused by debris, each model of Brush Cutt is finished off with a heavy-duty output shaft shield.
POWDER COATED FINISH
Heavy-duty construction and a durable powder-coated finish.
OPEN FRONT WITH PUSH BAR
The open front with push bar provides extra control against thick brush and the felling of trees, while the teeth hold the brush as the blades chew it up from below.
ANTI-SLIP STRIP
Extra traction from anti-slip strips provides improved safety as well as ease of entry and exit from the cab.
BRUSH CUTTING SIZE CHART (Brush Diameter in Inches))
MOTOR | MOTOR TYPE |
PSI | CASE DRAIN | 12 GPM |
15 GPM |
18 GPM |
20 GPM |
22 GPM |
25 GPM |
30 GPM |
40 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|
Motor RPM | 420 | 520 | 600 | 650 | 700 | ||||||
M450 | Roller-Vane | 2500 3000 |
Not Needed | 0.75″ 1″ |
1″ 1.25″ |
1.25″ 1.5″ |
1.5″ 2″ |
2″ 2.5″ |
Damage to motor will occur | ||
Motor RPM | 280 | 480 | 540 | 600 | 760 | ||||||
M550 | Roller-Vane | 2500 3000 |
Recommended | 1″ 1.25″ |
– – |
– – |
1.75″ 2″ |
2″ 2.5″ |
2.5″ 2.75″ |
3″ 3.25″ |
– – |
Motor RPM | 260 | 300 | 370 | 480 | 615 | ||||||
M650 | Roller-Vane | 2500 3000 |
Recommended | – – |
– – |
– – |
1.75″ 2″ |
2″ 2.5″ |
2.5″ 2.75″ |
2.75″ 3″ |
3″ 4″ |
Gearbox is a 1 to 1.46 increaser
Triple diameter capacity for felling trees
Weight | 1342 lbs |
---|