CF772 Open Front Skid Steer Rotary Brush Cutter Model

The rugged frame of the CF772 heavy-duty rotary brush cutter houses four AR400 blades featuring an 83″ path width. The 1/4” steel deck is designed to stand up and perform in rough terrain while cutting trees, brush, unwanted weeds and grass. The 72″ wide open mouth of this unit allows you to cut down larger trees in a sawing action.
Standard on the 700 series rotary brush cutter, the Brush Bar helps to funnel brush under the Rotary Brush Cutter to the AR400 blades. The serrated open front design of the push bar works to push the taller, heavier brush to the hardened blades, making quick work of woody brush and saplings.

Model No.	CF360	CF372	CF560	CF572	CF772
Available Motor Options	M450, M550, M650	M450, M550, M650	M450, M550, M650	M450, M550, M650	HS790
Recommended GPM	Check Motor Options	Check Motor Options	Check Motor Options	Check Motor Options	Check Motor Options
Max Brush Felling Size	2″	2″	4″	4″	6″
Discharge Protection	Link Chain Curtain Front and Back	Link Chain Curtain Front and Back	Open Front with Push Bar Link Chain Curtain on Back	Open Front with Push Bar Link Chain Curtain on Back	Open Front with Push Bar
Path Width	70″	82″	70″	82″	83″
Cutting Width	60″	72″	60″	72″	72″
Low Cutting Height	2.5″	2.5″	2.5″	2.5″	2.5″
Number of Blades	2	2	4	4	4
Attachment Type	Universal Skid-Steer Plate	Universal Skid-Steer Plate	Universal Skid-Steer Plate	Universal Skid-Steer Plate	Universal Skid-Steer Plate
Maximum HP	Check Flow & PSI on Skid Steer	Check Flow & PSI on Skid Steer	Check Flow & PSI on Skid Steer	Check Flow & PSI on Skid Steer	Check Flow & PSI on Skid Steer
Min Carrier Weight	4,000 lb	4,500 lb	4,500 lb	5,000 lb	6,000 lb
System Protection	Built In Hydraulic	Built In Hydraulic	Built In Hydraulic	Built In Hydraulic	Built In Hydraulic
Dimensions (LxWxH)	88″x72″x36″	90″x84″x36″	88″x72″x36″	90″x84″x36″	84″x83″x30″
Deck Structure	1/4″ steel	1/4″ steel	1/4″ steel	1/4″ steel	1/4″ steel
Unit Weight	1342 lbs.	1390 lbs.	1540 lbs.	1570 lbs.	1960 lbs.

MOTOR	MOTOR TYPE	PSI	CASE DRAIN	12 GPM	15 GPM	18 GPM	20 GPM	22 GPM	25 GPM	30 GPM	35 GPM	40 GPM	45 GPM	50 GPM
Motor RPM				420	520	600	650	700
M450	Roller-Vane	2500 3000	Not Needed	0.75″ 1″	1″ 1.25″	1.25″ 1.5″	1.5″ 2″	2″ 2.5″	Damage to motor will occur
Motor RPM				280			480	540	600	760
M550	Roller-Vane	2500 3000	Recommended	1″ 1.25″	– –	– –	1.75″ 2″	2″ 2.5″	2.5″ 2.75″	3″ 3.25″	– –	– –	– –	– –
Motor RPM							260	300	370	480	550	615
M650	Roller-Vane	2500 3000	Recommended	– –	– –	– –	1.75″ 2″	2″ 2.5″	2.5″ 2.75″	2.75″ 3″	3″ 4″	3″ 4″	– –	– –
RPM									850	946	1100	1260	1420	1580
HS790	Bent Axis Piston	3000 3500 4000	Recommended	– – –	– – –	– – –	– – –	– – –	2″ 2.5″ 3″	5″ 5.5″ 6″	5.5″ 6″ 6″	6″ 6″ 6″	6″ 6″ 6″	6″ 6″ 6″

As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Rotary brush cutter advances forward. The curved cutting tips of the slasher blades give the Rotary brush cutter two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in 4 blade configurations the Rotary brush cutter’s reversible/replaceable blades are made of long lasting 1/2″ AR 400 steel.

BLADE MOUNTED ON HEAVY DUTY BEARING SUPPORT

The CF772 Rotary Brush Cutter’s blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions.

Built for the long haul, CF772 has removable panel for easier access and servicing.

Standard on all Rotary brush cutter models is Hose Armour. This is a tough wrap which coils around the hoses and protects them from the harsh environment of brush cutting. The armour helps to prevent any punctures from fallen brush or trees.

Crafted from 1/2″ AR 400 steel, the unique profile of the slasher blades provides increased cutting surface. The blade’s thick reversible profile helps in maximum brush felling.

All CF772 Rotary brush cutter come with a free set of replacement blades on a new purchase. These replacement blades are conveniently secured on the wooden shipping skid.

CF772 uses 3/4″ heavy duty circular rotor designed with unique serrated edges. Serrated edge on the rotor helps to increase the mulching action and it also protects the load adaptor bearing setup.

Our Industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for pruning, trimming and land clearing. Built to last, these reliable motors can double the power of your output flow.

To prevent pressure relief activation on the motor seal, the rotary brush cutter CF772 comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance.

The powder coated frame has multiple anti-slip pads and laser cut steps, giving the operator a secure footing for easy entry and exit from the cab.

Heavy-duty construction and a durable powder-coated finish.

The open front with push bar provides extra control against thick brush and the felling of trees, while the teeth hold the brush as the blades chew it up from below.