APV
Auger Torque
Baumalight
Big John
Bison
Brush Chief
Cammond
Cimarron
Danuser
Degelman
Elston
Enorossi
Epiroc
Exothermic
Garfield
Greenscape
Ground Hog
Hackett
Herd
H&S
Kasco
Legend
Louisiana / Pit Boss
Martatch
Maschio
MK Martin
Monroe Tufline
Ogden
Remlinger
Rhino
Speeco
Tar River
Tennessee River Imp.
Wallenstein
Westfield
Worksaver
Big Foot
Dalbo
GoLight
TMW
ABM
Baasch & Sons
Behlen
Bohnert
Brown
B&B
B&W
Cajun Fryers
Dayton
Degelman
Douglas Welding
Dudrey
Fill Rite Fuel Pumps
Golden Valley
Grace
Hydraulic Wire Rollers
Kohler
Kosch
Lundell
Meyer
My-D Han-D
Oregon
Pengo
Powder River
Renn
S3 Delta Harrows
Sweep Blades
Winkel
WW
WLGX920-BLK
Wallenstein GX920 9’4″ Backhoe Base Unit | 45-120 HP | 750 lb Boom Lift Cap | 3925 lbs Digging Force
$12,770.00
Weight: 791lbs
| Digging Depth: | 9′ 4″ (284 cm) |
|---|---|
| Engine HP Range (Tractor): | 45 – 120 |
| Engine HP Range (Skidsteer): | 45 – 120 |
| Required Hydraulic Flow: | 5 – 27 gpm (19 – 102 lpm) |
| Stabilizer Width (Spread) : | 89″ (226 cm) |
| Main Boom Cylinder Diameter : | 3″ (76 mm) |
| Dipper Cylinder Diameter : | 2.5″ (64 mm) |
| Bucket Cylinder Diameter: | 2.5″ (64 mm) |
| Number Of Swing Cylinders: | 2 |
| Swing Cylinder Diameter: | 2.5″ (64 mm) |
| Stabilizer Cylinder Diameter: | 3″ (76 mm) |
| Reach From Swing Post : | 141″ (358 cm) |
| Includes Flow Divider: | Yes |
| Bucket Rotation: | 180° |
| Swing Arc: | 180° |
| SAE* Dipper Boom Digging Force: | 3200 lbs (1451 kg) |
| SAE* Bucket Digging Force: | 3925 lbs (1780 kg) |
| Boom Lift Capacity: | 750 lbs (340 kg) |
| Ground Clearance: | 10.5″ (27 cm) |
| Loading Height: | 89″ (226 cm) |
| Overall Operating Height (Fully Raised): | 135″ (343 cm) |
| Total Weight: | 791 lbs (359 kg) |
| Transport Dimensions (LxWxH): | 81″ x 43″ x 92″ (206 cm x 109 cm x 234 cm) |
| Operating Pressure: | 2250 psi (15513 kPa) |
| Mounting System: | Subframe, Skidsteer Universal Plate, PT302 (Cat I), PT322 (Cat II) |
Protects backhoe from unnecessary damage while preventing ground from falling back into the hole.
Dual cylinders provide strong, consistent movement throughout the entire 180-degree range.
Maintenance is easy with greasable pins on all pivot points.
To reduce wear, hardened steel bushings are installed on all the main pivot points.
Easy to use hydraulic stabilizers help to prevent tipping.
Our pin-on bucket teeth allow you to swap out worn or damaged teeth and get back to work as soon as possible.
When swinging the boom to the extreme ends, hydraulic cushioning gracefully brings the boom to a controlled stop.
Subframe Mount / Tie Back Kit – Please Click The Link Below To Get The Item # For Your Specific Subframe Mount Or Tie Back Kit.
Bucket (Select One)
| Weight | 791 lbs |
|---|