IMS760 Mulcher | Universal Skid | 75″ Path-60″ Blade Width | 25-35 GPM | C740 Motor
Case Drain Required
Hydraulic Hoses Included – No Couplers
MS760 Fixed Tooth Mulcher for Skidsteer
The 700 series Baumalight brush mulchers will efficiently mulch heavy brush and trees and are designed for contractors, rental and any other heavy duty mulching and land clearing. The 700 Series teeth are available in either Ripper or Planer style. The carbide Ripper tooth is the good general use tooth. Their v-shaped design shreds through brush and makes them less vulnerable in areas plagued by rocks and debris. The 700 Series Planer style tooth provides the most efficient cutting by smoothly chipping away at the brush. Its flat profile however makes it vulnerable to shattering on impact with rocks and other debris.
The 500 & 700 series skidsteer mulchers come with pressure gauges which is very handy to watch and see how close you are to maximum pressure; once you start blowing over relief the mulcher becomes very unproductive.
Operating a Brush Mulcher from a skid steer is probably the most comfortable way for vegetation management as your work is directly in front of you and new skidsteers are very operator comfort focused.
See our brush cutting size chart to see what limb size this excavator mounted forestry mulcher can handle.
Model No. | MS248 | MS348 | MS548 | MS560 | MS572 | iSeries MS760 | iSeries MS772 | MS960 | MS972 | MS1160 |
---|---|---|---|---|---|---|---|---|---|---|
Path Width | 60″ | 60″ | 62″ | 75″ | 87″ | 75″ | 84″ | 75″ | 84″ | 75″ |
Rotor Width | 48″ | 48″ | 48″ | 60″ | 72″ | 60″ | 72″ | 60″ | 72″ | 60″ |
Minimum carrier weight | 2,000 | 3,000 | 4,000 | 5,500 | 6,000 | 8,000 | 8,500 | 7,000 | 7,500 | 7,000 |
Cutting Depth | Level | Level | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground |
Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
Tool Style | Flail | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Carbide Tapper Fit | Double Tipped | Double Tipped | Sharpenable Planer |
Number of cutters | 30 | 60 | 104 | 126 | 160 | 78 | 94 | 38 | 43 | 31 |
Rotor Diameter (tool tips) | 17.25″ | 15″ | 15″ | 15″ | 15″ | 17.25″ | 17.25″ | 18.5″ | 18.5″ | 19.3″ |
Rotor Weight (with tools) | 125 lbs | 230 lbs | 480 lbs | 575 lbs | 700 lbs | 800 lbs | 930 lbs | 860 lbs | 1,105 lbs | 860 lbs |
System Protection | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief |
Hydraulic Couplers | Included | Included | Check with Dealer | Check with Dealer | Check with Dealer | Not Included | Not Included | Not Included | Not Included | Not Included |
Unit Shipping Weight | 750 lbs | 950 lbs | 1491 lbs | 2115 lbs | 2266 lbs | 2600 lbs | 3150 lbs | 2975 lbs | 3115 lbs | 2800 lbs |
ADJUSTABLE SKID SHOES
These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.
INTEGRATED PUSH BAR
The integrated brush bar helps control the brush and bend taller brush for easier mulching.
ARMOURED AND SLEEVED
Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.
700 SERIES RIPPER TEETH
The 700 Series tooth utilizes the Cup and Cone mount, which is machined into the holder and forged into the teeth. Engineered to take all the strain off the mounting bolt and eliminating shearing forces, these carbide teeth are bolted in place.
OPTION TO CHANGE OUT FOR 700 SERIES PLANER TEETH
Baumalight gives you the option to change out the ripper teeth for the planer style for a sharper bite with a smoother cut, but these teeth are more vulnerable to damage from rocks. Ripper teeth handle rocks much better, so Planer teeth are only recommended for cutting applications where efficiency is more important than tooth life.
HARDENED TOOTH HOLDERS
These heavy-duty tooth holders resist bending and keep you working longer.
SPIRAL TOOTH PATTERN
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
OVERTORQUE PROTECTION – RELIEF VALVE
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
PRESSURE GAUGE
Large PSI pressure gauge for maintaining the optimal flow that gives you a clear indication of the most efficient brush mulching performance.
REINFORCED BELT
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
WIRE PROTECTION
Protective steel cover that prevents damage from wire fencing.
CHAIN CURTAIN
The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.
HEAVY DUTY FRAME
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
POWDER COATED
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
ANTI SLIP STRIPS
For ease of entry and exit from the cab an anti-slip strip gives sure footing.
OVERHUNG LOAD ADAPTER (BEARING SUPPORT)
Baumalight mulchers use an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
MAXIMUM BRUSH CUTTING SIZES
(Brush Diameter in Inches)
200 Series
MOTOR | PSI | CASE DRAIN | 12 GPM | 15 GPM | 18 GPM | 20 GPM |
---|---|---|---|---|---|---|
RPM | 832 | 1060 | 1250 | 1390 | ||
200 Series Motor Standard Cup Teeth | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.25″ 0.375″ 0.375″ |
0.375″ 0.5″ 0.5″ |
0.5″ 0.75″ 0.75″ |
0.75″ 1″ 1″ |
RPM | 832 | 1060 | 1250 | 1390 | ||
200 Series Motor Heavy Blade Teeth | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.5″ 0.75″ 0.75″ |
0.75″ 1″ 1″ |
1″ 1.5″ 1.5″ |
1.5″ 2″ 2″ |
300 Series
MOTOR | PSI | CASE DRAIN | 12 GPM | 15 GPM | 18 GPM | 20 GPM |
---|---|---|---|---|---|---|
RPM | 832 | 1060 | 1250 | 1390 | ||
300 Series Motor | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.75″ 1″ 1″ |
1″ 1.25″ 1.25″ |
1.25″ 1.5″ 1.5″ |
2″ 2.5″ 2.5″ |
500 Series
MOTOR | PSI | CASE DRAIN | 8 GPM |
12 GPM |
15 GPM |
20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 555 | 832 | 1060 | 1390 | ||||||||||
A450 Roller-Vane | 2500 3000 3500 |
Not Needed Not Needed Recommended |
0.25″ 0.5″ 0.5″ |
0.75″ 1″ 1″ |
1″ 1.25″ 1.25″ |
1.5″ 2″ 2″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 640 | 846 | 1100 | 1370 | 1600 | |||||||||
B550 Roller-Vane | 2500 3000 3500 |
Not Needed Recommended Needed |
— — — |
0.25″ 0.5″ 0.5″ |
0.75″ 1″ 1″ |
1.25″ 1.75″ 1.75″ |
2.5″ 3″ 3″ |
3″ 3.5″ 3.5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1090 | 1640 | 2050 | |||||||||||
C508 Bent Axis Piston | 3000 3500 4000 |
Critical | 1.5″ 2″ 2.5″ |
2.25″ 2.75″ 3.25″ |
2.75″ 3.25″ 4″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1190 | 1490 | 2000 | 2490 | ||||||||||
C510 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
2″ 2.5″ 3″ |
2.5″ 3″ 3.5″ |
3″ 3.5″ 4.5″ |
3.5″ 4.5″ 5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1450 | 1800 | 2100 | |||||||||||
C530 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
3″ 3.5″ 4.5″ |
4″ 4.5″ 5″ |
5″ 5.5″ 5.75″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1500 | 1800 | 2100 | |||||||||||
C540 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
3.75″ 4.25″ 4.75″ |
5.5″ 5.75″ 6″ |
6″ 6.5″ 7″ |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1600 | 1875 | 2140 | |||||||||||
C550 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
5″ 5.5″ 5.75″ |
6.5″ 7″ 7.5″ |
7″ 7.5″ 8″ |
— — — |
— — — |
— — — |
— — — |
RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
C570 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
— — — |
6″ 6.5″ 7″ |
5.5″ 6″ 6.5″ |
7″ 7.5″ 8″ |
7.5″ 8″ 8.5″ |
— — — |
— — — |
RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
C590 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
5″ 5.5″ 6″ |
7.5″ 8″ 9″ |
9″ 9.5″ 10″ |
9.5″ 10″ 11″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
700 Series
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||||
C730 Bent Axis Piston |
3000 3500 4000 |
Critical | 3.5″ 4″ 5″ |
4.5″ 5″ 5.5″ |
5.5″ 6″ 6.5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1500 | 1800 | 2100 | ||||||||
C740 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
4.25″ 4.75″ 5.25″ |
6″ 6.25″ 6.5″ |
6.5″ 7″ 7.5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1600 | 1875 | 2140 | ||||||||
C750 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
5.5″ 6″ 6.25″ |
7″ 7.5″ 8″ |
7.5″ 8″ 8.5″ |
— — — |
— — — |
— — — |
— — — |
RPM | 1400 | 1630 | 1830 | 2030 | |||||||
C770 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
6.5″ 7″ 7.5″ |
6″ 6.5″ 7″ |
7.5″ 8″ 8.5″ |
8″ 8.5″ 9″ |
— — — |
— — — |
RPM | 1400 | 1570 | 1750 | 1900 | |||||||
C790 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
5.5″ 6″ 6.5″ |
8″ 8.5″ 9.5″ |
9.5″ 10″ 10.5″ |
10″ 10.5″ 11.5″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
900 Series
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||
C930 Bent Axis Piston |
3000 3500 4000 |
Critical | 4″ 4.5″ 5.5″ |
5″ 5.5″ 6″ |
6″ 6.5″ 7″ |
— — — |
— — — |
— — — |
— — — |
RPM | 1500 | 1800 | 2100 | ||||||
C940 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
4.75″ 5.25″ 5.75″ |
6.5″ 6.75″ 7″ |
7″ 7.5″ 8″ |
— — — |
— — — |
— — — |
RPM | 1600 | 1875 | 2140 | ||||||
C950 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
6″ 6.5″ 6.75″ |
7.5″ 8″ 8.5″ |
8″ 8.5″ 9″ |
— — — |
— — — |
RPM | 1400 | 1630 | 1830 | 2030 | |||||
C970 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
6″ 7.5″ 8″ |
6.5″ 7″ 7.5″ |
8″ 8.5″ 9″ |
8.5″ 9″ 9.5″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
1100 Series
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||||
C1130 Bent Axis Piston |
3000 3500 4000 |
Critical | 5″ 5.5″ 6.5″ |
6″ 6.5″ 7″ |
7″ 7.5″ 8″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1500 | 1800 | 2100 | ||||||||
C1140 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
6.75″ 7.25″ 7.75″ |
8.5″ 8.75″ 9″ |
9″ 9.5″ 10″ |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1600 | 1875 | 2140 | ||||||||
C1150 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
9″ 9.5″ 9.75″ |
10.5″ 11″ 11.5″ |
11″ 11.5″ 12″ |
— — — |
— — — |
— — — |
— — — |
RPM | 1400 | 1630 | 1830 | 2030 | |||||||
C1170 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
10″ 11.5″ 12″ |
10.5″ 11″ 11.5″ |
12″ 12.5″ 13″ |
12.5″ 13″ 13.5″ |
— — — |
— — — |
RPM | 1400 | 1570 | 1750 | 1900 | |||||||
C1190 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
10.5″ 11″ 11.5″ |
13″ 13.5″ 14.5″ |
14.5″ 15″ 15.5″ |
15″ 15.5″ 16.5″ |
Double brush size for “stop and chew” cutting for skid steer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
______________________________________________________________________________________________________________________________________________________________________________________________________
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB ATWOOD