WLMS348
MS348 Brush Mulcher | Universal Skid | 62″ Path-48″ Blade Width | 12-19 GPM | Dedicated Motor
$8,928.00
Weight: 950lbs
MS348 Fixed Tooth Mulcher for Skid Steer
Our most light weight fixed tooth brush mulcher for skid steers. With adequate flow, the MS348 brush mulcher will efficiently cut heavy vegetation and light brush using high speed teeth. The concave shaped carbide tip provides aggressive brush mulching action by chipping the brush bit by bit. Part of the secret of their performance is the ease of rotating the teeth so there is always a sharp edge to make mulching easier.
Operating a Brush Mulcher from a skid steer list probably the most comfortable way for vegetation management, as your work is directly in front of you and new skidsteers are very operator-comfort focused.
See our brush cutting size chart to see how much this light weight excavator mounted forestry mulcher can tear up.
| Model No. | MS248 | MS348 | MS548 | MS560 | MS572 | iSeries MS760 | iSeries MS772 | MS960 | MS972 | MS1160 |
|---|---|---|---|---|---|---|---|---|---|---|
| Path Width | 60″ | 60″ | 62″ | 75″ | 87″ | 75″ | 84″ | 75″ | 84″ | 75″ |
| Rotor Width | 48″ | 48″ | 48″ | 60″ | 72″ | 60″ | 72″ | 60″ | 72″ | 60″ |
| Minimum carrier weight | 2,000 | 3,000 | 4,000 | 5,500 | 6,000 | 8,000 | 8,500 | 7,000 | 7,500 | 7,000 |
| Cutting Depth | Level | Level | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground |
| Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Tool Style | Flail | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Carbide Tapper Fit | Double Tipped | Double Tipped | Sharpenable Planer |
| Number of cutters | 30 | 60 | 104 | 126 | 160 | 78 | 94 | 38 | 43 | 31 |
| Rotor Diameter (tool tips) | 17.25″ | 15″ | 15″ | 15″ | 15″ | 17.25″ | 17.25″ | 18.5″ | 18.5″ | 19.3″ |
| Rotor Weight (with tools) | 125 lbs | 230 lbs | 480 lbs | 575 lbs | 700 lbs | 800 lbs | 930 lbs | 860 lbs | 1,105 lbs | 860 lbs |
| System Protection | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief |
| Hydraulic Couplers | Included | Included | Check with Dealer | Check with Dealer | Check with Dealer | Not Included | Not Included | Not Included | Not Included | Not Included |
| Unit Shipping Weight | 750 lbs | 950 lbs | 1491 lbs | 2115 lbs | 2266 lbs | 2600 lbs | 3150 lbs | 2975 lbs | 3115 lbs | 2800 lbs |
INTEGRATED SKID SHOES
These durable skid shoes help the mulcher to better float over the ground for optimal cutting action.
INTEGRATED BRUSH BAR
The integrated brush bar helps control the brush and bend taller brush for easier mulching.
6 FREE TEETH
All MS348 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.
HIGH SPEED TEETH
The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.
HARDENED TOOTH HOLDERS
Heavy-duty teeth holders resist bending and keep you working longer.
SPIRAL TOOTH PATTERN
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
OVERTORQUE PROTECTION – RELIEF VALVE
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
REINFORCED BELT
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
WIRE PROTECTION
Protective steel cover that prevents damage from wire fencing.
POWDER COATED
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
ANTI SLIP STRIPS
For ease of entry and exit from the cab an anti-slip strip gives sure footing.
MAXIMUM BRUSH CUTTING SIZES (Brush Diameter in Inches)
200 Series
| MOTOR | PSI | CASE DRAIN | 12 GPM | 15 GPM | 18 GPM | 20 GPM |
|---|---|---|---|---|---|---|
| RPM | 832 | 1060 | 1250 | 1390 | ||
| 200 Series Motor Standard Cup Teeth | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.25″ 0.375″ 0.375″ |
0.375″ 0.5″ 0.5″ |
0.5″ 0.75″ 0.75″ |
0.75″ 1″ 1″ |
| RPM | 832 | 1060 | 1250 | 1390 | ||
| 200 Series Motor Heavy Blade Teeth | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.5″ 0.75″ 0.75″ |
0.75″ 1″ 1″ |
1″ 1.5″ 1.5″ |
1.5″ 2″ 2″ |
300 Series
| MOTOR | PSI | CASE DRAIN | 12 GPM | 15 GPM | 18 GPM | 20 GPM |
|---|---|---|---|---|---|---|
| RPM | 832 | 1060 | 1250 | 1390 | ||
| 300 Series Motor | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.75″ 1″ 1″ |
1″ 1.25″ 1.25″ |
1.25″ 1.5″ 1.5″ |
2″ 2.5″ 2.5″ |
500 Series
| MOTOR | PSI | CASE DRAIN | 8 GPM |
12 GPM |
15 GPM |
20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 555 | 832 | 1060 | 1390 | ||||||||||
| A450 Roller-Vane | 2500 3000 3500 |
Not Needed Not Needed Recommended |
0.25″ 0.5″ 0.5″ |
0.75″ 1″ 1″ |
1″ 1.25″ 1.25″ |
1.5″ 2″ 2″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 640 | 846 | 1100 | 1370 | 1600 | |||||||||
| B550 Roller-Vane | 2500 3000 3500 |
Not Needed Recommended Needed |
— — — |
0.25″ 0.5″ 0.5″ |
0.75″ 1″ 1″ |
1.25″ 1.75″ 1.75″ |
2.5″ 3″ 3″ |
3″ 3.5″ 3.5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 1090 | 1640 | 2050 | |||||||||||
| C508 Bent Axis Piston | 3000 3500 4000 |
Critical | 1.5″ 2″ 2.5″ |
2.25″ 2.75″ 3.25″ |
2.75″ 3.25″ 4″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 1190 | 1490 | 2000 | 2490 | ||||||||||
| C510 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
2″ 2.5″ 3″ |
2.5″ 3″ 3.5″ |
3″ 3.5″ 4.5″ |
3.5″ 4.5″ 5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 1450 | 1800 | 2100 | |||||||||||
| C530 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
3″ 3.5″ 4.5″ |
4″ 4.5″ 5″ |
5″ 5.5″ 5.75″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 1500 | 1800 | 2100 | |||||||||||
| C540 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
3.75″ 4.25″ 4.75″ |
5.5″ 5.75″ 6″ |
6″ 6.5″ 7″ |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 1600 | 1875 | 2140 | |||||||||||
| C550 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
5″ 5.5″ 5.75″ |
6.5″ 7″ 7.5″ |
7″ 7.5″ 8″ |
— — — |
— — — |
— — — |
— — — |
| RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
| C570 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
— — — |
6″ 6.5″ 7″ |
5.5″ 6″ 6.5″ |
7″ 7.5″ 8″ |
7.5″ 8″ 8.5″ |
— — — |
— — — |
| RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
| C590 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
5″ 5.5″ 6″ |
7.5″ 8″ 9″ |
9″ 9.5″ 10″ |
9.5″ 10″ 11″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
| Weight | 950 lbs |
|---|