Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase

Baumalight Warranty Covers Parts & Labor, But Does Not Cover Misuse, Negligence, Consequential Damage Or Expenses Including Loss Of Profit. The Engine Is Only Covered Under The Original Manufacturer’s Warranty.

*PTO Shafts Should Never Be Worked On Under Warranty – It Is Much Cheaper To Send A New Shaft*

*Dealer Travel Time & Travel Expenses Are Not Covered Under Warranty*

This Is Strictly An Overview Baumalight’s Warranty Policy. Please See Your Owner’s Manual For Complete Warranty Policy.

AGRICULTURAL PRODUCT WARRANTY

Warranty Period – 1 Year From Date Of Purchase 

Behlen Country warrants to the original purchaser that its products that prove to be defective in materials or workmanship within one year from the date of purchase will be repaired or replaced at Behlen Country’s option, free of charge, F.O.B. closest plant location, U.S.A.

Energy-free, electric and insulated drinker bodies have a limited five-year warranty from date of purchase.  Component parts, such as electric motors, heaters, valves and controls that are manufactured by a company other than Behlen Country, have a one-year limited warranty by Behlen Country.  Additional warranties by the manufacturer of these items may also apply.

All poly round tanks have a two-year limited warranty. All poly round end tanks have a three-year limited warranty. All fence panels have a five-year limited warranty. All Champion gates have a limited lifetime warranty.

WHAT IS NOT COVERED BY THE WARRANTY

Warranty Does NOT Cover

• Assemblages not made in accordance with installation instructions, and defects arising thereof.
• When the operation of the product varies from our operating instructions.
• Malfunction or defect resulting from misuse, negligence, alteration, accident, natural disasters, failure to reasonably care for, or lack of performance of required maintenance.
• Loss of time, inconvenience, loss-of-use of product, or any or all CONSEQUENTIAL DAMAGES.
• Use of the product in industrial application, or any application not involved in the business of farming or ranching.

SERVICE PARTS POLICY

Repair parts are provided for all current models.

Limited availability of common service parts for recently discontinued items.

Repair parts will not be manufactured for obsoleted equipment and can only be supplied subject to availability in inventory.

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 6 Months From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Periods 

Ag / Residential Use – 1 Year

Commercial / Rental Use – 90 Days

Warranty Statement

Billy Goat warrants all products manufactured by it against defects in workmanship or material. The length of the warranty period is l (one) year unless otherwise specified below. All warranties commence from the date of shipment to final user. The responsibility of Billy Goat under this warranty is limited to replacement or repair of defective parts at an authorized dealer. Billy Goat reserves the right to inspect the machine and parts submitted for warranty repair to determine the validity of the claim. Any expenses for transportation (pickup & delivery or freight for parts) to process the warranty claims are not reimbursable. Damages resulting from shipping, inappropriate usage, accidents, failure to operate or maintain the unit according to instructions in the operator’s manual are excluded. Components subject to wear, such as belts, bearings, blades, filter bags, zippers, wheels, hoses, liners, cables, brushes, and others not listed but otherwise deemed as such by Billy Goat are not considered warranty unless a manufacturing defect is proven to cause premature failure. Premature failure is considered 90 days or less. Purchased replacement parts are warranted for 90 days from purchase date. Normal maintenance and adjustments are the responsibility of the user and not covered by warranty. Repairs and/or maintenance carried out by non-authorized persons or dealers, as well as usage of unauthorized parts or accessories not supplied by Billy Goat cause immediate forfeiture of the warranty. Unauthorized modifications will also result in immediate forfeiture of the warranty. In no event shall Billy Goat be liable for consequential damages arising out of the failure of any product to operate properly.

Integral units such as gasoline engines, transmissions, etc., are excluded from the warranty and are subject to the prime manufacturer’s warranty.

THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED.

Note: To request warranty service, please contact an authorized Billy Goat dealer or check your operator’s manual for proper procedure.

Warranty Procedure 

Should a Billy Goat Machine fail due to a defect in material and / or workmanship, the owner should make a warranty claim as follows:

The Machine must be taken to the dealer from whom it was purchased or to an authorized Servicing Billy Goat Dealer.

The owner must present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt. Warranty will not be considered without proof of purchase date.

The Warranty Claim will be completed by the authorized Billy Goat Dealer and submitted to their respective Billy Goat Distributor for their territory. Attention: Service Manager. Any parts replaced under warranty must be tagged and retained for 90 days.

The distributor service manager will sign off on the claim and submit it to Billy Goat for consideration.

The Technical Service Manager at Billy Goat will review the claim and may request parts to be returned for examination. Billy Goat will notify their conclusions to the distributor service manager from whom the claim was received.

The decision by the Technical Service department at Billy Goat to approve or reject a Warranty claim is final and binding.

Note: To process a Warranty Claim, it is necessary to quote the Model & Serial Number which are printed on the Billy Goat Serial Plate (See operator’s manual). The purchase date is also required on all claims.

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Periods

1 Year On Electric & Hydraulic Systems

5 Years On All Workmanship 

B&W

We stand behind our products.

We are confident that our products are made without design or quality defects. However, if you believe that one of our products doesn’t live up to our standards, we would make it right with you, our customer.

If your product suffers damage because of an accident or misuse on your part, we would work with you to get you back on the road with as little cost and hassle to you as possible, because that is just being a good neighbor.

We can’t keep your product in ‘new’ condition and your product and the finish will age through normal wear and tear. You should only use our products in the manner intended in their design. Most of our products require some minimal maintenance to continue to work as they did when they were new.

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Periods 

1 Year From Date Of Purchase On Parts

Lifetime On Workmanship

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Periods

Header Trailers – 1 Year From Date Of Purchase 

Mowers – 1 Year From Date Of Purchase 

Sprayers – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Registration 

Any warranty claim submitted will NOT be considered unless registration is complete and on file with Danuser.

Before operating this attachment, I must read the Operator’s Manuals for the attachment and for the vehicle/power source and ensure all safety signs (decals), guards, and shields are in place. I understand the operator is responsible for the safety of him/herself and others in the area. I have examined the product and accept it as being complete and in satisfactory condition.

Warranty Periods

Augers & Mounts – 1 Year From Date Of Purchase

Grapples, Hammers, & T3 – 1 Year From Date Of Purchase

PostMaster / Slab Blaster – 1 Year From Date Of Purchase

Auger Buckets – 1 Year From Date Of Purchase 

Pallet Fork Frames / Tines – 2 Years From Date Of Purchase 

EP Diggers – 3 Years On Drive Unit / Lifetime Output Shaft Pullout 

F8, G20/40, & J20/80 Diggers – 5 Years From Date Of Purchase

8300, 8800, 8900, & Pro Diggers – 5 Years From Date Of Purchase 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Policy / Periods

Degelman Requires Unit Registration Prior To Starting The Warranty Claim Process

Non-Commercial Use – 2 Years From Date Of Purchase 

Commercial Use – 1 Year From Date Of Purchase

a. The first 12 months (one year) are warranted for parts and labour starting from the date of delivery to customer. Some exemptions apply (See Below).
b. The following 12 months (second year) are warranted only for parts. Some exemptions apply (See Below).
o Product must be on record as delivered to the customer, otherwise, the date of shipment will be considered as the initial date of sale.
o Reasonable troubleshooting and labour hours will be paid against documented claims subject to dealers posted shop rate per hour.
o Warranty parts will initially be charged to the dealer.
o Upon receipt of the warranty claim form, the claim will be reviewed and if warranty is accepted a credit note will be raised for the cost and freight of the supplied parts.

NOTE:

• Parts installed under product warranty are warranted for the remainder of the original product warranty.
• Rental/commercial use machines are subject to 6 month warranted parts and labour, with a following 6 months of warranted parts only.

Items Exempt From Degelman 2 Year Warranty Policy

1. Products are warranted for the first 12 months (first year) for parts and labour from initial date of delivery to customer. Exemptions are as follows for damages resulting from:
o Abuse
o Negligence
o Accidents
o Alterations or use of any accessory or attachment not approved by Degelman
o Items such as bulbs, cutting edges, discs, mower blades and other wearable items
2. Product is further warranted for the following 12 months (second year) for parts only from initial date of delivery to customer. Exemptions include the aforementioned incidences and damages resulting from the following:
o Bearings
o PTO Drive Shafts

Tire Warranty
Degelman does not cover tires under warranty. Each type of tire is warranted separately through their respective manufacturer. It is the dealer’s responsibility to go through a tire dealer to obtain warranty for a malfunctioned tire. The credit given for a tire warranty from the tire manufacturer is of no influence or fault of Degelman Industries LP, regardless of full or partial credit.
To ensure life of tires emphasize to the customer and driver the precautions and proper procedures to take when transporting their product, as that is the time with the highest rate of incidences involving tires and rims. All transport requirements are found in each product’s respective manual.

Items Not Covered Under Warranty

o Cost of additional travel time, kilometres (miles) expense and technician expenses or allowances incurred while performing warranty repairs.
o Normal maintenance services and parts such as tightening of bolts, nuts and fittings or normal machine adjustments.
o Charges for incidental or consequential damage, delay, any economic or commercial loss associated with machine defects.
o Damage or failure caused by improper application and service, misuse, negligence, inadequate storage, accident, abuse or use not in accordance with published operating and maintenance procedures.
o Labor expenses by repair centres other than those authorized by Degelman Industries LP.
o Failures resulting from previous installation of non-genuine Degelman replacement parts.
o Costs of unauthorized modification.
o Repair costs resulting from improper diagnosis or service work previously performed.
o Parts not acknowledged by Degelman to be defective in material and/or workmanship.
o Transport costs to deliver a machine to and from the customer’s location for warranty repairs.
o Any other associated costs considered to be non-warranty related or dealer customer responsibility. Such as consumables (oil, fuel, etc.) and shop supplies.

Warranty Periods

Hydraulic Components – 1 Year From Date Of Purchase 

Engines – 1 Year From Date Of Purchase 

Machine Structure – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

**Warranty / Labor Must Be Approved By Manufacture**

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Periods (Parts Only)

Ag Use – 1 Year From Date Of Purchase 

Commercial Use – 90 Days From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Limited Warranty 

Please Contact Gates MFG. 

Warranty Periods 

GT Series – 3 Years From Date Of Purchase 

Stryker St Series – 5 Years From Date Of Purchase 

Stryker Series – 5 Years From Date Of Purchase

Gobee Series – 1 Year From Date Of Purchase 

GXL Performance Series – 10 Years From Date Of Purchase 

GXL Worklight Series – 5 Years From Date Of Purchase 

GXL Off-Road Series – 5 Years From Date Of Purchase

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

All Grace Products Must Be Registered Within Three Months Of Original Sale For Full Factory Warranty

Grace Warranty Policy

Grace, hereinafter referred to as Manufacturer, warrants each new implement to be free from defects in material and workmanship under normal use and service for a period of two (2) years on all welded components and one (1) year on the cylinder, motor, and gearbox hydraulic components from the date of original sale. Hydraulic hoses are not covered by warranty.

This warranty is expressly in lieu of all other warranties and representations, expressed or implied, and all other obligations or liabilities on the part of the Manufacturer.

Manufacturer’s liability and obligation is limited to repair and replacement of the product or a refund of the purchase price, at Manufacturer’s option, provided the purchaser returns the claimed defective product to the Manufacturer or authorized distributor, with transportation charges prepaid, and an examination by Manufacturer discloses the product to be defective.

This warranty does not cover said product that has been repaired or altered outside of the factory of Manufacturer in any way as to, in the judgement of the Manufacturer, affect the stability, reliability, or performance of the product. This warranty does not cover damage or product failure caused by accident, misuse, negligence, tampering, improper attachment, or improper maintenance.

This warranty excludes all liabilities for consequential or incidental damages.

This warranty gives you specific legal rights providing said product is put to its proper designed use.

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy.

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Periods

Twin Mergers – 120 Days From The Date Of Purchase

Everything Else – 1 Year From The Date Of Purchase

Labor – 1 Year From The Date Of Purchase

Parts – 2 Years From The Date Of Purchase

Warranty Policy 

H&S Manufacturing Co., Inc. (“H&S”) warrants this product to be free from defect in material and workmanship. Except as noted below, this warranty term is twelve (12) months on labor, and twenty-four (24) months on parts from the date of delivery of the product to the original purchaser by an authorized H&S dealer. Under this warranty, H&S will repair or replace, at its option, any covered
part which is found to be defective in material or workmanship during the applicable warranty term. In no case will the covered repair cost of a part or parts exceed the replacement cost of that part. Warranty service must be performed by H&S or a dealer authorized by H&S to sell and/or service the product involved, which will use only new or remanufactured parts or components furnished by H&S. This warranty includes approved parts and labor to fix the product but does not include, and the purchaser is responsible for, any service call and/or transportation of the product to and from the dealer’s place of business, for any premium charged for overtime labor requested by the purchaser, and for any service work not directly related to any defect covered under this warranty. This warranty includes only those components of the product manufactured by H&S. Warranty for any component not manufactured by H&S including, but not limited to, engines, batteries, tires, rims, hydraulic motors, pumps, etc. are covered by the warranty, if any, provided separately by their respective manufacturers. This warranty in all its parts, is extended solely to the original purchaser of the product, is terminated upon any subsequent transfer or sale from or by the original purchaser and extends no third party benefits or rights whatsoever. The warranty term for any product used in any commercial, custom, for hire or rental application, is limited to six (6) months from the date of delivery of the product to the original purchaser or the first day of service, whichever comes first, by an authorized H&S dealer. For commercial, custom for hire, or rental application, warranty is limited to 6 months from the date of delivery to the original purchaser, or the first day in service, whichever is earlier. This warranty does not include: (1) Any product that has been altered or modified in ways not approved by H&S; (2) Depreciation or damage caused by normal wear, use for which the product was not designed, misuse, improper or insufficient maintenance, improper operation, accident or failure to follow the product Operator’s Manual recommendations and product decal recommendations; (3) Normal maintenance parts and service; (4) Repairs made with parts other than those available from H&S or performed by anyone other than H&S or a dealer authorized by H&S to sell and/or service the product involved. To secure warranty service the purchaser must report the product defect to a dealer authorized by H&S to sell and/or service the product involved within the applicable warranty term together with evidence of the warranty start date and make the product available to that dealer within a reasonable period of time. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE OF THIS WARRANTY. H&S and the companies affiliated with it makes no warranties, representations, or promises, express or implied, as to the performance or freedom from defect of its products other than those set forth above and NO IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS OR FITNESS FOR A PARTICULAR PURPOSE IS MADE. IN NO EVENT WILL THE DEALER, H&S OR ANY
COMPANY AFFILIATED WITH H&S BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. The ONLY REMEDY the purchaser has in connection with the breach of performance of any warranty on H&S products are those set forth above. The selling dealer has no authority to make any representation or promise on behalf of H&S, or to modify the terms or limitations of this warranty in any way.

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 90 Days From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 90 Days From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Limited Warranty – Contact Kelderman

Warranty Period – 4 Months From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Original Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Kohler Warranty Varies Depending On The Motor Series. Please Check Their Warranty Registration Before Beginning A Claim Process. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Conditions

All wood pellet grills by Louisiana carry a limited warranty from the date of sale by the original owner. The warranty coverage begins on the original date of purchase and proof of date of purchase, or copy of original bill of sale, is required to validate the warranty. Customers will be subject to parts, shipping, and handling fees if unable to provide proof of the purchase or after the warranty has expired. 

Louisiana carries a five (5) year warranty against defects and workmanship on all parts, and five (5) year on electrical components. Louisiana warrants that all part(s) are free of defects in material and workmanship, for the length of use and ownership of the original purchaser. Warranty does not cover damage from wear and tear, such as scratches, dents, dings, chips or minor cosmetic cracks. These aesthetic changes of the grill do not affect its performance. Repair or replacement of any part does not extend past the limited warranty beyond the five (5) year from date of purchase. 

During the term of the warranty, Louisiana’s obligation shall be limited to furnishing a replacement for defective and/or failed components. As long as it is within the warranty period, Louisiana’s will not charge for repair or replacement for parts returned, freight prepaid, if the part(s) are found by Louisiana’s to be defective upon examination. Louisiana’s shall not be liable for transportation charges, labor costs, or export duties. Except as provided in these conditions of warranty, repair or replacement of parts in the manner and for the period of time mentioned heretofore shall constitute the fulfillment of all direct and derivate liabilities and obligations from Louisiana’s to you. 

Louisiana’s takes every precaution to utilize materials that retard rust. Even with these safeguards, the protective coatings can be compromised by various substances and conditions beyond Louisiana’s control. High temperatures, excessive humidity, chlorine, industrial fumes, fertilizers, lawn pesticides and salt are some of the substances that can affect metal coatings. For these reasons, the warranty does not cover rust or oxidization, unless there is loss of structural integrity on the grill component. Should any of the above occur, kindly refer to the care and maintenance section to prolong the lifespan of your unit.  Louisiana’s recommends the use of a grill cover when the grill is not in use. 

This warranty is based on normal domestic use and service of the grill and neither limited warranty coverages apply for a grill which is used in commercial applications. 

Exceptions 

There is no written or implied performance warranty on Louisiana Grills grills, as the manufacturer has no control over the installation, operation, cleaning, maintenance, or the type of fuel burned. This warranty will not apply nor will Louisiana’s assume responsibility if your appliance has not been installed, operated, cleaned, and maintained in strict accordance with this owner’s manual. Any use of gas not outlined in this manual may void the warranty. The warranty does not cover damage or breakage due to misuse, improper handling, or modifications. 

Neither Louisiana’s, or authorized Louisiana Grills dealer, accepts responsibility, legal or otherwise, for the incidental or consequential damage to the property or persons resulting from the use of this product. Whether a claim is made against Louisiana’s based on the breach of this warranty or any other type of warranty expressed or implied by law, the manufacturer shall in no event be liable for any special, indirect, consequential, or other damages of any nature whatsoever in excess of the original purchase of this product. All warranties by manufacturer are set forth herein and no claim shall be made against manufacturer on any warranty or representation. 

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations of implied warranties, so the limitations or exclusions set forth in this limited warranty may not apply to you. This limited warranty gives you specific legal rights and you may have other rights, which vary from state to state.

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

McHale Warranty Policy

It is essential that that each machine is registered on-line (PDI’ed) as soon as it is retailed. If this is not done, you will not be entitled to Warranty or Service on this machine.

Unless confirmed in writing by the McHale Warranty Manager, all warranty parts which are not required to be returned to McHale must be held by the Dealer / Importer for a period of 2 years from the date of repair. Warranty parts should be held in a clean secure area (not outside) with particular care taken with electric parts.

All parts must be labelled with the Warranty Claim Number, Machine Serial Number and Machine Model Number. Parts must be available for inspection by McHale personnel or return to McHale within the two year period, if warranty parts are not stored and labelled correctly they will be re-invoiced in full.

Warranty Periods 

Snow Blades

Standard Unregistered Snow Plows – 2 Years From Purchase Date

Standard Registered Snow Plows – 3 Years From Purchase Date

Structural Steel Snow Plows – 5 Years From Purchase Date

Registered With Monarch Hyd Unit – 5 Years From Purchase Date

Spreaders 

Blasters – 5 Years From Date Of Purchase

Crossfires – 5 Years From Date Of Purchase

BL240/400/750 – 2 Years From Date Of Purchase

Snow Blade Warranty Policy

What Is Covered

Meyer Products, LLC, warrants to the original purchaser of Meyer® branded products that they will be free from defects in materials or workmanship, with the exceptions stated below. No person is authorized to change this warranty or to create any additional warranty on Meyer® products.

How Long Coverage Lasts

This warranty runs for a period of two years from the date of purchase on any purchase of a complete Snow Plow Package. If the snow plow is registered online at www.meyerproducts.com within sixty (60) days of purchase, your warranty for the Package will be extended for a period of three years. In addition to the warranties covering a complete Snow Plow Package and Structural Steel, you will receive a warranty for a period of one year from the date of purchase on individual parts, components, and accessories. All foregoing warranties apply only to an original purchaser of the product if the product is installed by an authorized Distributor/Sub-Distributor and terminate if the product is sold or otherwise transferred. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

What Is Not Covered

This warranty does not cover:
• Problems caused by failure to follow the product instructions, failure to maintain the product as described in the Operator’s Manual, or failure to maintain proper levels of fluids and lubricants.
• Problems caused by contamination or restriction of lubricant systems or damage resulting from rust, corrosion, freezing, or overheating.
• Paint or expendable snow plow parts such as pins, runners, cutting edges, chrome plating, springs, and markers.
• Damage to any vehicle to which the products are mounted or the suitability of any product for vehicles which are not fitted with the appropriate heavy-duty snow plow service preparation parts.
• Damage caused by usage that is not in accordance with product instructions (use of the snow plow for any purpose other than plowing snow is considered misuse and abuse).
• Any snow plow, part, component, or assembly thereof, which has been modified or altered.
• Problems caused by using accessories, parts, or components not supplied by Meyer Products.
• Cost of tax, freight, transportation, storage charges, environmental charges, solvents, sealants, lubricants, or any other normal shop supplies.
• Cost of gas, lodging, mileage, or any other incidental costs incurred with installation, maintenance, transportation, of the snow plow.
• Problems caused by collision, fire, theft, vandalism, riot, explosion, lightning, earthquake, windstorm, hail, water, flood, or any other Acts of God.
• Liability for damage to property, injury to, or death of any person arising out of the operation, maintenance or use of the covered product.
• Products with missing or altered serial numbers.

The original purchaser’s sole and exclusive remedy against Meyer Products and its Distributors and Sub-Distributors, and Meyer Products’ sole obligation for any and all claims, whether for breach of contract, warranty, tort (including negligence) or otherwise shall be limited to providing, through its authorized Distributor/Sub-Distributor network, all labor and/or parts necessary to correct such defects free of charge. Any cost incurred in returning the product to an authorized Meyer^® Distributor/Sub-Distributor is the responsibility of the original purchaser.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THE LIMITED WARRANTY PERIOD. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE LIMITED WARRANTY PERIOD HAS EXPIRED. Meyer Products disclaims liability beyond the remedies provided for in this limited warranty, and disclaims all liability for incidental, consequential, and special damages, including, without limitation, any liability for third-party claims against you for damages, for products not being available for use, or for lost profits. Meyer Products’ liability will be no more than the amount you paid for the product that is the subject of a claim; this is the maximum amount for which we are responsible. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

What Meyer Products Will Do

Meyer Products will repair any product that proves to be defective in materials or workmanship. In the event repair is not possible or practical (as determined by Meyer Products in its sole discretion), Meyer Products will either replace the product with a new product of similar model and price, or refund the full purchase price, as determined by Meyer Products.

Customer Responsibilities

Customer must keep the complete Snow Plow Package serviced/maintained as recommended by Meyer Products. A written record of service must be maintained, along with receipts for maintenance materials purchased. A copy of the maintenance record and pertinent receipts may be requested in the event of a claim.

How To Get Service

In order to obtain service under this warranty, the original purchaser must:

•   Use all reasonable means to protect the complete snow plow package from further damage.
•  Contact your local Meyer^® dealer from whom the product was purchased or to any authorized Meyer^® dealer. Transportation and freight charges prepaid when applicable. Only Meyer^® dealers are authorized to perform the obligations under this warranty. For the address and telephone number of the Meyer^® dealer nearest you visit https://www.meyerproducts.com/dealer-locator.
•   Provide maintenance record and receipts for required maintenance, if requested.
•   Allow inspection of damaged parts and/or complete snow plow package if deemed necessary by Meyer Products, Meyer^® dealer.
•   It is the responsibility of the original purchaser to establish the warranty period by verifying the original delivery date. A bill of sale/sales receipt, cancelled check, or some other appropriate payment record may be kept for that purpose.
How State Law Applies: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

A complete Snow Plow Package consists of the hydraulic motor, operating controller, lift-frame, moldboard and all related items.
Structural elements consist of the mounting, lift-frame, A-frame, sector, and the moldboard.

How State Law Applies

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Warranty Periods

Units – 7 Years From Date Of Purchase 

Gearboxes – 7 Years From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

PENGO LIMITED WARRANTY

Products manufactured by Pengo wear and are expendable in their function. Wear and tear and occasional breakage must, therefore, be expected.

Pengo products are warranted from defects in material and workmanship for a period of Sixty (60) days from the date of invoice. Pengo will either replace or credit the defective part at its option. Any labor and/or material required to remove or install parts is excluded under this limited warranty. Products that have been misused, misapplied, hard-faced, improperly welded, or otherwise installed contrary to instructions and specifications are not covered by this limited warranty.

Pengo reserves the right to make design, specification and price changes without notice, and obligations to the effect of such changes.

Pengo makes no other warranty. All other warranties, whether expressed, implied or statuary, such as warranties of merchantability of fitness for a particular purpose, are hereby excluded and disclaimed to the extent that they exceed the warranties expressly granted in this limited warranty. In no event shall Pengo be liable for consequential or incidental damages, whether direct or indirect, claimed by the customer, and/or any third parties.

PENGO DRIVES LIMITED WARRANTY

NOTE: Pengo drives are not warranted for DTH applications. The DTH application will cause issues with the shaft and hydraulic motor.

All new Pengo products are warranted to be free from defects in material and workmanship, which may cause failure under normal usage and service when used for the purpose intended.

Pengo warrants its gearbox for a period of twenty-four (24) months and twelve (12) months on the hydraulic motor dating from the delivery to the original user. The Pengo warranty covers faulty workmanship and defective parts manufactured by Pengo. The warranty does not extend to transportation cost of parts, nor does it cover consequential loss, damage to hydraulic hoses or ground-engaging parts such as sprockets, digging chain, bearings and teeth.

Pengo equipment must be operated in accordance with the recommended procedures and within the ranges as specified, both on the unit and contained in the operating manual.

Any claims under this warranty must be made within fourteen (14) days after the buyer learns of the facts upon which claim is based. All claims not made in writing and not received by Pengo within the time specified above may be deemed waived. Serial number must accompany all claims.

Pengo will not be responsible for or accept any charges for work carried out by any repairs, or for any charges for any spare parts fitted to any Pengo products without written approval from Pengo.

This warranty is void if field repairs have been made to the hydraulic motors, gearboxes and controls without written approval. The complete unit must be available for inspection in its original but alleged failed condition.

Pengo’s liability for any and all losses and damages to buyer resulting from any cause whatsoever, including Pengo negligence, irrespective of whether such defects are discoverable or latent, shall in no event exceed the purchase price of the particular parts, with respect to which losses or damages are claimed, or, at the discretion of Pengo, the repair or replacement of defective or damaged parts.

Any goods returned to Pengo by the customer under warranty or repair must have all freight charges prepaid for on the customer’s account.

RETURNS AND CLAIMS

1. Pengo reserves the right to determine whether products claimed to be defective shall be inspected by our personnel in the field or returned to the factory. If judged by Pengo to be defective in material or workmanship, the product will be replaced or a credit issued at the option of Pengo.
2. Upon notification of defect, Pengo’s Inside Sales Department will issue a Return Goods Authorization (RGA) number. All returns for replacement or credit MUST be accompanied by an RGA number. Products returned without an RGA number will be rejected and returned to the sender freight collect.
3. All returns must be shipped “prepaid”. Products shipped “collect” will be refused. Proof of purchase such as invoice number must accompany returns.
4. Slow-moving dealer inventory may be returned once per calendar year. The net value cannot exceed 5% of the previous year’s purchases. A 20% re-stocking charge will apply to the net value or returned products. All returns must be of current manufacture and in un-used condition. Rusty or custom-painted products will not be accepted for return.

Warranty Periods

All Units (Unless Specified) – 1 Year From Date Of Purchase 

Classic Series – 5 Years From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Limited Warranty – Contact For Details 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Periods

Ag Use – 1 Year From Date Of Purchase 

Commercial Use – 90 Days From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Rhino Gas Post Driver Warranty Policy 

Warranty Period – 1 Year From Date Of Purchase

The purchase of a Rhino Tool, as outlined in the warranty terms, automatically serves as the product registration and the start of the customer’s One year (12 months) warranty. The Rhino Service Technician will use our number marking on the tool and proof of purchase supplied by the customer, to determine if the tool is still covered by warranty.

Rhino Tool Company, Inc. (“Rhino”) warrants to the original purchaser, purchasing the Equipment in new condition, in original packaging from an authorized dealer that its Gasoline Powered Post Driver will be free from defects in workmanship and materials (the “Limited Warranty”).The Limited Warranty shall survive for the lifetime of the product with respect to the Hammer and Anvil components and for twelve (12) months with regard to all other components, excluding the Honda GX35 engine for which Rhino provides no warranty and for which the warranty provided by American Honda Motor Co., Inc. shall be the sole warranty applicable thereto. This Limited Warranty is non-transferable.

For Warranty Claims contact your dealer or distributor. Proof of purchase date and serial number is required. In the event of a warranty repair, the post driver should be returned to a Registered and Warranty Authorized Rhino Servicing Dealer. Rhino’s obligation under this Limited Warranty is expressly limited to the repair or replacement, at Rhino’s election, of such defective Gasoline Powered Post Driver, which is proved to be defective upon inspection by a Rhino-certified/authorized technician.

This Limited Warranty does not extend to a Gasoline Powered Post Driver which has been subject to misuse, neglect, or accident, nor does it extend to any Gasoline Powered Post Driver which has been repaired, altered, or serviced by unauthorized persons. This Limited Warranty does not cover any damage or adjustments required to any Gasoline Powered Post Driver if such damage or adjustment is caused by the use of supplies, parts, or attachments not sold or approved by Rhino.

EXCEPT AS OTHERWISE PROVIDED HEREIN, RHINO DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES SHALL RHINO BE LIABLE FOR ANY LOSS OF BUSINESS, REVENUES, OR PROFIT OR OTHER INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING OUT OF ANY DEFECTS IN OR PERFORMANCE OF THE GASOLINE POWERED POST DRIVER, HOWSOEVER CAUSED.

Important Instructions for obtaining warranty:
The purchase of a Rhino Tool, as outlined in the warranty terms, automatically serves as the product registration and the start of the customer’s 1 year warranty. The Rhino Service Technician will use our number marking on the tool and proof of purchase supplied by the customer, to determine if the tool is still covered by warranty.

It is recommended that the dealer or customer keep a sales receipt or other record of the purchase date to assist in accurately determining warranty coverage on the tool.

If a repair or replacement is needed within 1 year a Warranty Claim form will need to be completed at that time. Any repair or replacement requires Pre-Approval by a Rhino Authorized Service Center.

Rhino Manual Post Puller Warranty Policy

Warranty Period – 1 Year From Date Of Purchase

Warranty: RHINO TOOL COMPANY warrants to the original purchaser for a period of One Year (12 months) from the date of purchase that its Post Puller is free from defects in manufacture and materials. In the event of a manufacturing defect during the Warranty period, the Post Puller must be returned freight prepaid to RHINO TOOL COMPANY. If inspection shows a defect in material or workmanship, RHINO will repair or replace without charge.

Exclusive Remedy: The sole and exclusive remedy under this Warranty is repair or replacement of the product by RHINO TOOL COMPANY.

Disclaimer: In no event shall RHINO TOOL COMPANY be liable for indirect, incidental or consequential damages arising from the sale or use of this product, at any time. RHINO TOOL COMPANY disclaims liability for any implied warranties, including implied warranties of “Merchantability” and “Fitness for a Specific Purpose”.

Limitation: This Warranty DOES NOT APPLY to the physical appearance of any product or to any product that has been misused, abused, improperly maintained, altered or repaired by unauthorized persons, or to repairs required by normal wear and tear.

Transferability: The above Warranty is non-transferable.

Important
Instructions for obtaining warranty:

For Warranty Claims contact your dealer or distributor. Proof of purchase date and serial number is required. In the event of a warranty repair, the post driver should be returned to Rhino Tool Company. Rhino’s obligation under this Limited Warranty is expressly limited to the repair or replacement, at Rhino’s election, of such defective Post Puller, which is proved to be defective upon inspection by a Rhino-certified/authorized technician.

This Limited Warranty does not extend to a Rhino Post Puller which has been subject to misuse, neglect, or accident, nor does it extend to any Post Puller which has been repaired, altered, or serviced by unauthorized persons. This Limited Warranty does not cover any damage or adjustments made to any Rhino Post Puller if such damage or adjustment is caused by the use of supplies, parts, or attachments not sold or approved by Rhino.

EXCEPT AS OTHERWISE PROVIDED HEREIN, RHINO DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES SHALL RHINO BE LIABLE FOR ANY LOSS OF BUSINESS, REVENUES, OR PROFIT OR OTHER INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING OUT OF ANY DEFECTS IN OR PERFORMANCE OF THE POST PULLER, HOWSOEVER CAUSED.

Important Instructions for obtaining warranty:

The purchase of a Rhino Tool as outlined below automatically serves as the product registration and the start of the customer’s One year (12 months) warranty. The Rhino Service Technician will use our number marking on the tool and proof of purchase supplied by the customer, to determine if the tool is still covered by warranty.

It is recommended that the dealer or customer keep a sales receipt or other record of the purchase date to assist in accurately determining warranty coverage on the tool.

If a repair or replacement is needed within 1 year a Warranty Claim form will need to be completed at that time. Any repair or replacement requires Pre-Approval by a Rhino Authorized Service Technician.

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Periods

Non Commercial (Gov, Municipal, & Farm Use) – 1 Year From Date Of Purchase 

Commercial – 6 Months From Date Of Purchase 

Rental Use – 30 Days From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Tiller Warranty Periods

*Must Have Pre-Approval*

Non-Commercial – 1 Year From Date Of Purchase  Commercial Use – 90 Days From Date Of Purchase Rental Use – 30 Days From Date Of Purchase Gearbox Only / Parts Only / No Labor – 5 Years From Date Of Purchase  This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Product Registration Required

Dealers Please Visit The Link Below To Register Your Sold Unit With Your Customer. 

Warranty Period

Warranty Period – 5 Years From Date Of Purchase

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Periods

Units – 1 Year From Date Of Purchase 

Whole PTO’s Will Not Be Covered Under Warranty – Parts Only

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Limited Warranty – Contact For Info

Warranty Periods

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy. 

Warranty Period – 1 Year From Date Of Purchase 

This Is Strictly An Overview Of The Warranty Policy Time Frame. Please See Your Owner’s Manual For Complete Warranty Policy.