30′ Big Dog Forage Box | Rear Unload | Solid Poly Floor | 8′ Inside Width | 5″ Stringers @ 34″ Spacing
Truck Requirements: 35 GPM Minimum | 3000 PSI Minimum
Back Freight – $1,350
PRICES DO NOT INCLUDE SHIPPING OR SETUP – PRICED F.O.B. FACTORY
To Complete This Unit –
- A Door Option Must Be Added
- Must Be Mounted On A Chassis Or Truck – See Mounting Packages & Chassis Units Below
Unit Includes
- 8′ Inside Width
- 5″ Main Stringers Set @ 34″ Spacing
- Stainless Steel Sides/Front/Rear
- Mesh Screen Top Sides
- Lever Action Front Flip-Down Panel
- Solid Poly Floor
- Double Gearcase Drive System
- Hyd. Drive System w/1″ Hyd. Lines
- PL88C Open Barrel Pintle Apron
- Automatic Locking/Unlocking Tailgate
- Gate Delay
- LED Highway Lighting
26′ | ||
---|---|---|
CAPACITY – STRUCK LEVEL | 1477 cu. ft. | |
BOX WEIGHT | N/A | |
INSIDE LENGTH | 26′ | |
INSIDE WIDTH | 98″ | |
INSIDE HEIGHT | 86″ | |
OVERALL LENGTH | 27′ 7″ | |
OVERALL WIDTH | 102″ | |
OVERALL HEIGHT INCLUDING TAILGATE | N/A | |
SIDE HEIGHT | N/A | |
DRIVE SYSTEM | Dual Hydraulic Motors | |
FINAL DRIVE SYSTEM | Dual Final Drive w/ Oil Bath and Spring Loaded Tightener | |
MAIN APRON CHAIN & SLATS | PL88C Open Barrel Pintle 2″ x 1″ x 3/16″ Formed Apron Channels | |
REAR DRIVE SHAFT | 2¼″ 1045 Steel | |
FRONT IDLER SHAFT | 1¾″ 1045 Steel | |
UPRIGHTS | 2″ x 2″ x 3/16″ Tubular Steel Set on 16″ Centers | |
UNLOAD TIME | Dependent on Tractor Hydraulic System & GPMs | |
WALL MATERIAL | Stainless Steel | |
FLOOR MATERIAL | Virgin Grade Poly | |
AIR GATE DELAY SYSTEM | Standard | |
REAR DOOR LATCHING | Automatic | |
FRONT WINDOW | 17″ x 28″ | |
LIGHTS | LED | |
CUSTOMER FARM NAME | Standard |
Features
- PL88C open barrel pintle chain @ 29,900# per strand = 119,600#, w/2″ x 1″ x 3/16″ formed apron channels for apron cross bars.
- Top Pivot Door w/Air Gate Delay (Truck Mount)
- Barn Doors w/Air Closure (Truck Mount)
- Top Pivot Door w/Hydraulic Gate Delay (Chassis Mount)
- The “BIG DOG” features 1″ steel lines to the back of the box and DUAL HYDRAULIC MOTORS. The motors evenly drive each final drive system for more power and less shaft stress than a single motor system.
- The drive shaft features MD nylon reversible style bearings.
- 16 Gauge Stainless Steel Sides.
- Large 17″ x 28″ front window for viewing when unloading.
- The idler apron shaft assembly features 6 tooth machined steel sprockets with bronze idler bushings.
- Apron tension adjustment is made by tightening the 4 spring loaded tightener bolts on the front of the box. The spring loaded tighteners maintain tension on the apron during start up and operation.
- Spring Loaded Main Apron Tighteners.
- LED Lighting and Door Locks.
- Available with an Optional Rollback or Side to Side Tarp.
- A Front hydraulic drive is optional.
Loading...
- CH3130 Chassis | 60,000 Cap
- CH4130 Chassis | 15 Ton Per Axle Rating
-
-
HSCHO4BIC
Brake Installation Charge (Not Available On Knocked Down Shipping Configurations)
-
-
-
-
-
-