TN560 60″ Trencher | Univ Skid Std | 10″ Wide | 50/50 Rock & Cup Tooth Chain | SS 12-25 GPM Tractor 22-25
*PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB BV ATWOOD, KS
*Hydraulic Hoses & Couplers Included
*Before Purchase, Ensure Carrier Weight Is 3,000 – 7,000 lbs
TN560 Trencher for Skidsteer
Dig deep, an impressive 5 feet deep with Baumalight’s TN560 Trencher for skidsteer. Ideal or landscapers or contractors who need to safely bury gas lines, electrical line, plumbing or drainage lines, the Bamalight TN560 will cut trenches up to 60” deep and between 6” to 10” wide, getting you far underground and below the frost line. The TN560 trencher is powered by a planetary drive system. With no roller chain to worry about, the planetary drive unit delivers hydraulic power directly to the sprocket of the digging chain for optimal trenching performance.
The TN560 can be mounted to skidsteers between 3000 and 7000 lbs.
TN236 | TNM336B | TN336 | TN548 | TN560 | TN760 | |
---|---|---|---|---|---|---|
Mount | Standard Mini skindsteer | Bobcat mini skidsteer | Universial skidsteer | Universial skidsteer | Universial skidsteer | Universial skidsteer |
Trench depth | 36″ | 36″ | 36″ | 48″ | 60″ | 60″ |
Trench width | 4″ to 6″ | 4″ to 6″ | 4″ to 6″ | 6″ to 10″ | 6″ to 10″ | 6″ to 10″ |
Drive type | Direct drive | Direct drive | Direct drive | Planetary | Planetary | Planetary |
Main shaft size | 1:10 taper hardened shaft | 1:10 taper hardened shaft | 1:10 taper hardened shaft | 2-9/16″ solid hardened steel | 2-9/16″ solid hardened steel | 2-9/16″ solid hardened steel |
Trencher chain torque at 3,000 PSI | 6,703 lbs-in | 6,703 lbs-in | 14,571 lbs-in | 21,856 lbs-in | 21,856 lbs-in | 33,877 lbs-in |
Over torque protection | Hydraulic relief | Hydraulic relief | Hydraulic relief | Hydraulic relief | Hydraulic relief | Hydraulic relief |
Horse Power (HP) | 10 – 25 | 10 – 25 | 30 – 55 | 40 – 100 | 40 – 100 | 40 – 100 |
Carrier weight (lb) | 1,500 – 4,000 | 1,500 – 4,000 | 2,000 – 5,000 | 3,000 – 7,000 | 3,000 – 7,000 | 4,000 – 12,000 |
Min. / Max. GPM Skidsteer | 7 to 18 | 7 to 18 | 10 to 20 | 12 to 25 | 12 to 25 | 20 to 42 |
Min. / Max. GPM Tractor | N/A | N/A | 14 to 22 | 15 to 25 | N/A | N/A |
Weight | 470 lb | 675 lb | 850 lb | 1,250 lb | 1,500 lb | 1800 lb |
SIDE AUGER
Baumalight Trenchers are designed with a convenient side auger. The side auger keeps the dirt clear from the trenching action but still near the trench when it’s time for back filling.
CRUMB SCRAPER BAR
The Trencher has a crumb scraper bar as standard equipment, this helps to scrape and sweep extra dirt and debris into the chain where it is lifted out of the trench. The heavy construction and hinged design mean that the scraper performs no matter what depth of trench you are digging.
PLANETARY DRIVE SYSTEM
The sealed drive keeps the dirt out and the trencher going. The compact and stron g planetary drive unit delivers the hydraulic power directly to the sprocket of the digging chain for good digging performance. There are no roller chains that jump or stretch. Maximum torque transfer. The motor is mounted directly in-line with the main sprocket.
SOLID STEEL NOSE
The Baumalight Trencher’s heavy duty nose is precision machined from a piece of solid steel. It runs freely on dual tapered roller bearings to deal with the extreme forces of trenching.
Dirt is the enemy of all bearings. A precision machined washer protects the bearings from rocks and dirt. This initial barricade is reinforced by the rubber seal on the bearings, finishing the job is the easily accessible grease fitting which keeps the bearings lubricated and protected from moisture and keeps our nose running freely.
ADJUSTABLE CHAIN TENSION
Adjusting the chain tension with a couple of pumps. The grease cylinder tensioner allows you to adjust the tension of the chain quickly with only a grease gun. By applying grease to an internal cylinder the roller nose is pushed forward taking the slack out of the chain. What could be a long frustrating process is now a few quick pumps.
Weight | 1441 lbs |
---|