Worksaver 84″ Split Top Grapple Rake | Univ. Skid | Double Cylinder | Max HP – 150 PTO

PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY

*Unit Includes 1/4″ I.D. x 72″ Hoses With SAE 1/2″ Male/Female Flat Faced 3/4″ – 16 O Ring Couplers. See Tab Below For Loader Hose Kits To Connect To Tractor Rear Remotes.

Worksaver Split Top Grapple Rakes

Designed for Skid Steer loaders, the SSGR-84 features a lower profile design than standard brush grapples making access to the operator’s seat easy, even on units with a cab door. Lower tines with gripping notches of 1” material with weld-on tine points allow the grapple to pick-up debris while leaving the dirt behind. The dual upper grapples open a full 59-inches allowing the operator to maximize the amount of debris held.

Two 2” x 10”, 3000 psi cylinders are mounted behind the mainframe to operate the upper grapples, while protecting them from harm. Hoses are routed through the mainframe providing protection for them.

Lower profile provides easy access to the operator’s seat, even on units with a cab door.
Lower tines have weld-on tine points, allowing operator to go under logs/brush for easy clean pick-up.
Gripping notches in upper grapple and lower tines help to retain materials in the grapple rake.
Pivot points have lubrication capabilities for long service life.

Skid Steer Brush Grapple Specifications
	SSGR-84
Overall Width (in/mm)	84 / 2134
Overall Depth (in/mm)	25 / 635
Overall Height Closed (in/mm)	42 / 1067
Grapple Opening (in/mm)	59 / 1499
Upper Grapple Width (in/mm)	19.5 / 495
Tine Spacing (in/mm)	15.5 / 394
Number of Lower Tines	6
Reinforcing Tubes Between Lower Tines	Yes
Number of Hydraulic Cylinders	2
Cylinder Bore / Stroke (in/mm)	2 x 10 / 51 x 254
Cylinder Pressure Rating (psi/bar)	3000 / 206.9
Mounting Type	“Universal” Skid Steer
Horsepower Rating (maximum)	150 PTO
Weight (lbs/kg)	925 / 420
Product No.	812500