Baumalight CXC530 40″ Brush Cutter | 2-10 T Exc | Max Brush Size 3.5″ | HX508 Motor | 8-14 GPM | 3 Blades
*Hydraulic Hoses & Couplers NOT Included
*Requires Critical Case Drain- See Info Below
*Must Add Excavator Mount To Complete – See Below
*PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY
CXC530 Excavator Rotary Brush Cutter
Taking the rotary Brush Cutter mower to new heights is the 30” compact CXC530 model for mini-excavators. Built to help you tackle the areas with limited access, the CXC530’s unique blade design attacks and cuts thick brush, reducing it to mulch. The reversible blades provide long performance before requiring sharpening or replacement. The tri-swing blades chop and mulch all the way to the ground, allowing operators to mulch whole trees. Giving bite to the blade is an industry-leading bent axis piston motor, making the best possible use of this rotary mower’s hydraulic flow and pressure.
We offer multiple motors to exact match your flow so be sure to checkout the motor options area of the page below to maximize your work as you clear land with your excavator.
Model No. | CXC530 | CXC542 | CXC550 |
---|---|---|---|
Baumalight Connection Code | A02 | A02 | A03 |
Available Motor Options | HX508, HX510, HX530 | HX530, HX550, HX570 | HX550, HX570, HX590 |
Recommended GPM | Check Motor Options Chart | ||
Maximum Brush Size | 3.5″ | 5″ | 6″ |
Discharge Protection | Open Front and Back | ||
Path Width | 40″ | 50″ | 67″ |
Cutting Width | 30″ | 42″ | 50″ |
Low Cutting Height | 2.5″ | 2.5″ | 2.5″ |
Number of Blades | 3 | 3 | 3 |
Slashes per Second | 80 | 80 | 90 |
Attachment Type | Bolt-On | ||
Maximum HP | Check Flow & PSI on Carrier | ||
Min Carrier Weight | 2 ton | 3 ton | 8 ton |
Max Carrier Weight | 10 ton | 15 ton | 20 ton |
System Protection | Hydraulic Relief Value | ||
Deck Structure | 1/4″ AR400 steel | 1/4″ AR400 steel | 3/8″ AR400 steel |
Unit Weight | 550 lbs | 640 lbs | 1,380 lbs |
THREE CUTS PER PASS
As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Brush Cutt advances forward. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 75–100 slashes per second with devastating results. The Brush Cutt’s reversible/replaceable blades are made of long lasting 1/2″ AR 400 steel.
LARGE BEARING SUPPORT
Carburized alloy steel shafts are standard measuring 2.95″ in diameter at the bearings and weighing substantial 104lbs. Built with high quality double-lip oil seals and using an ISO class external bearing locknut system.
BLADE MOUNT
To secure slasher blades to the blade assembly, Baumalight uses Gr. 8 bolts capped off with castle nuts and cotter pins.
3-WAY MODEL
Designed for easy service, the 3-Way models feature a heavy duty rotor with 3 fixed extensions. Each extension is finished off with a slasher blade. This configuration is capable of providing 75–100 slashes per second.
DECK STRENGTH
Taking back your property can be a rough job. We designed and built the deck as a solid platform to take on the task. Built from rugged 1/4 inch steel and then further reinforced with support channels it’s a solid base of operations.
BENT AXIS PISTON MOTOR
Our industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for your brush clearing needs.
ROTOR
Using a 1″ top plate and a 1″ bottom plate this heavy-duty rotor sandwiches the three–way blade assembly in place.
BRUSH CUTTING SIZE CHART (Brush Diameter in Inches)
MOTOR | PSI | CASE DRAIN | 6 GPM |
12 GPM |
15 GPM |
20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 827 | 1637 | 2045 | |||||||||
HX508 | 3000 3500 4000 |
Critical | 0.5″ 0.75″ 1.25″ |
2″ 2.5″ 2.75″ |
2.25″ 2.75″ 3″ |
– – – |
– – – |
– – – |
– – – |
– – – |
– – – |
– – – |
RPM | 1190 | 1492 | 1990 | |||||||||
HX510 | 3000 3500 4000 |
Critical | – – – |
2.25″ 2.75″ 3″ |
2.5″ 3″ 3.25″ |
2.75″ 3.5″ 3.75″ |
– – – |
– – – |
– – – |
– – – |
– – – |
– – – |
RPM | 1075 | 1450 | 1800 | |||||||||
HX530 | 3000 3500 4000 |
Critical | – – – |
– – – |
2.75″ 3.5″ 3.75″ |
3″ 3.75″ 4″ |
3.5″ 4″ 4.25″ |
– – – |
– – – |
– – – |
– – – |
– – – |
RPM | 1072 | 1340 | 1600 | |||||||||
HX550 | 3000 3500 4000 |
Critical | – – – |
– – – |
– – – |
3.5″ 4″ 4.25″ |
3.75″ 4.25″ 4.5″ |
4″ 4.5″ 4.75″ |
– – – |
– – – |
– – – |
– – – |
RPM | 1019 | 1223 | 1427 | 1631 | ||||||||
HX570 | 3000 3500 4000 |
Critical | – – – |
– – – |
– – – |
– – – |
4″ 4.5″ 4.75″ |
4.5″ 5″ 5.5″ |
5″ 5.5″ 6″ |
5.5″ 6″ 7″ |
– – – |
– – – |
RPM | 946 | 1100 | 1260 | 1420 | 1580 | |||||||
HX590 | 3000 3500 4000 |
Critical | – – – |
– – – |
– – – |
– – – |
– – – |
5″ 5.5″ 6″ |
5.5″ 6″ 7″ |
6″ 7″ 8″ |
7″ 8″ 9″ |
8″ 9″ 10″ |
Triple diameter capacity for felling trees, a rotor speed of over 1,800rpm is not recommended on 42″ or larger.
What Is A Case Drain Line ?
On most skidsteer and excavator Hydraulic systems, Hydraulic motors and pumps require a case drain line. Sometimes referred to as a third line, the case drain line will relieve any excess pressure and drain it back to your return line, then into the reservoir. Without a properly installed case drain, that extra pressure could blow a seal or damage your hydraulic line. For higher flow motors or on piston and gear motors, a case drain line is always required. Although, no matter the size of your motor, a case drain is always a good idea as it will relieve the amount of pressure on your shaft seal, helping to prolong its life. A case drain line can also increase the efficiency of your hydraulic system as it will lower the back pressure on the tank line.
Since most machines have a unique style of coupler, BaumaLight does not include a coupler on our case drain line, although they are available. If your skidsteer is not equipped with a case drain, then it can be field installed.
How Important Is A Case Drain Line ?
If we say having a case drain is critical and you operate without one, you will blow out your shaft seal. Be sure to check the motor sizing charts on our website.
Exception If You Have A Hammer Valve
There is one exception in the need for a case drain on gear motors and that is if you excavator is equipped with a hammer valve, this is a larger free flow line back to tank.
Identifying Your Case Drain Line
The following galleries show a highlighted case drain line on multiple skidsteer and excavator models.
Excavator Mounting
Baumalight offers two options to mount your attachment on your excavator, blank weld-on plates & turn key custom solutions. All Baumalight excavator mounting options are manufactured in Canada and our team of experts will work with you to ensure you receive the best solution for your excavator.
Blank Weld-On Plates
The bank weld-on plate is designed for you to weld on your own ear lugs for your specific excavator mount. The bolt pattern in the plate lines up with the bolt pattern on Baumalight attachments, allowing you to bolt the attachment in place.
Turn-Key Custom Solutions
A fully customized solution, the team at Baumalight designs and builds your custom excavator adaptor for your specific excavator to ensure that the attachment is ready to go to work as soon as it arrives.
Add Connection Code
Click The Link Below To Find Your Specific D00**** Ex Mount
Add Turn Key Option That Corresponds With Your D00****
Please Note Your D00**** When Ordering
The Turn Key Pricing Includes The Connection Code Price
Weight | 550 lbs |
---|