MAC-205
Maschio C-205 83″ Tiller | CAT 2 – Not QH Comp. | 60-130 HP | 48 Blades
$13,565.41
Weight: 1588lbs
C Tillers (60-130 HP)
MULTISPEED GEARBOX
The MASCHIO C Rotary Tillers are the best choice for horticulture, orchards, vineyards and landscaping operations using heavy-duty tractors. The gear transmission, heavy-duty multi-speed gearbox and bearings with water-proof duo cone seals make this model suitable for professional and intensive use. As an option it is available with rear roller, which are easily adjustable by mechanical side jacks or hydraulic rams. The operator can easily manage the working depth by setting the adjustable skids thanks to the quick-set system. The rear wide bonnet has a double spring for the down pressure adjustment and a smooth road transportation. The bonnet design and side deflector enable a perfect finish. The wide 6-blade rotor enables a working depth of up to 10”. Counter flanges are available as an option to strengthen the rotor, making it suitable for intense and rocky conditions.
Standard Equipment
- 540/1000 rpm PTO gearbox
- Rotor revolutions 540 rpm PTO (4s): 175-214-262-143
- Rotor revolutions 1000 rpm PTO (2s): 324-356
- Slip clutch PTO shaft (1″ 3/8 Z6 tractor side yoke)
-
Heavy-duty rotor hub:– Duo-Cone metal face seals– Oil-bath – Heavy-duty SKF ball bearings
- Side gear drive in oil bath
- Universal three point hitch, cat. II^
- Offset front bar hitches
- 6 blades per flange (side blades are always mounted inwards)
- Long multi-bends rear levelling doors with down-pressure double springs
- Pair of skids
- Side blades mounted outwards available upon request
Wider rear rollers for optimal seedbed preparation
The rear rollers are wider than the rotor allowing a perfect seedbed refinement and levelling.
Windingshape levelling bonnets
The levelling bonnet comes as standard. it is adjustable by a mechanical jack in order to ensure a perfect levelled and smooth seedbed. The sturdy springs act as shock absorber and they increase the machine stability at work.
Low maintenance
The new Duo-Cone sealing system guarantees reliability without maintenance. You can achieve at least 50% longer life from the Duo-Cone system than standard sealing systems in the most demanding working environments.
The sealing system is completely waterproof or “amphibious” allowing the rotor and bearing to run in its own oil supply, this allows the rotor to work and be reliable in the dustiest of environments or even work immersed in water and yet the seals will still prevent water and dust ingress into the rotor and hubs.
Side gear drive in oil-bath
3 heavy duty gears in oil-bath ensure high performance even in heavy working conditions.
Multispeed gearbox
Working speed could be easily set by changing the gears inside the gearbox. The user may select the most suitable rotor rpm according to soil conditions.
| VERSION | BLADES NR. | POWER NEEDED (HP) | WORKING WIDTH (FT.) | WORKING DEPTH (IN.) | TOTAL WIDTH (FT) |
|---|---|---|---|---|---|
| 205 | 48 | 60-130 | 6¾ | 10 | 7¼ |
| 230 | 54 | 70-130 | 7½ | 10 | 8 |
| 250 | 60 | 80-130 | 8 | 10 | 9 |
| 280 | 66 | 85-130 | 9½ | 10 | 10 |
| 300 | 72 | 100-130 | 10 | 10 | 10½ |
Is This A Right Hand Or Left Hand Tiller Blade?
Step 1: Remove the tiller blade from the tiller.
Step 2: Hold the tine so that it dangles from the bolt holes.
Step 3: Holding the blade in front of you, turn it so that the cutting edge faces you. If the blade curves to the left, it’s a left-hand blade.
| Weight | 1588 lbs |
|---|