WID8514
8.5 x 14 Flatbed – No Ball | 1/8 Floor
$4,808.00
8.5 x 14 Flatbed – No Ball | 1/8 Floor
For Custom Sized Flatbeds, Call For Info & Pricing.
Ordering Info
Bed Length
When ordering a bed, the most important factor in determining the proper model of truck bed, is the measurement from the back of the cab to the center of the axle (CA). Also, the frame width is needed to have the bed frame in line with the truck frame, To help with determining the proper bed size, get the following info about the truck:
- Make & Year Of Truck
- Cab To Axle Measurement
- Single Or Dual Tires
- Fuel Tank Location ( Front, Rear, Or Both )
- Gas Or Diesel ( If Diesel, Does It Have A DEF Tank As Well? )
Winkel MFG will not be responsible for incorrect or improper fitting beds if this information is incomplete or incorrect.
Bed Width
Measure overall tire width & pick the bed width accordingly:
- 7′ Wide Beds Measure 82″ Wide On The Solid Floor (87″ Wide With Pockets & Rails)
- 7.5′ Wide Beds Measure 87″ Wide On The Solid Floor (92″ Wide With Pockets & Rails)
- 8′ Wide Beds Measure 91″ Wide On The Solid Floor (96″ Wide With Pockets & Rails)
- 8.5′ Wide Beds Measure 96″ Wide On The Solid Floor (101″ Wide With Pockets & Rails)
Note: For Beds On 2 Ton Trucks & Larger, Might Require A Full 8.5′ Wide Bed. Full 8.5′ Wide Beds Measure 97.5″ Wide On The Solid Floor (102″ Wide With Pockets & Rails)
Better than a hired-hand, Winkel flatbeds will dependably work for you night and day for the lifetime of your truck….maybe even longer! From Texas to North Dakota, from Colorado to Ohio, Winkel Flatbeds are seen moving down roads–working from feedlot to field, to pasture and back to rancher and farmers’ yards everywhere.
We understand what you expect and need behind the cab of your trucks. Built with knowledge garnered from our own everyday use and experiences, plus that of numerous others, our flatbeds are designed with common sense, hard working application in mind. They’re solidly constructed to stand up to your demands, expectations and rigors of everyday use.
Features Include:
- 12 Gauge Treadplate Flooring – Bent Down & Under
- 2″ Channel Cross Members On 12″ Centers
- 5″ Channel Long Stills
- B&W, Or Cody Pocket Ball – All Rated @ 30,000 lbs With Safety Chain D-Rings
- 3 x 4 Rectangle Tube Rear Hitch With 2″ Receiver Tube
- Safety Chain D-Rings On Each Side Of Receiver Tube
- Hitch Area Filled In With Treadplate & Has Tag Mount, Tag Light & Trailer Plug Hole
- Stake Pockets & Tie – Rail On Sides
- 1 Fuel Hole
- 4 – 2″ Round Marker Lights ( 1 @ Each Corner Of Bed)
- 2 – 4″ Round Red, Stop – Turn & Tail Lights On Rear
- 2 – 4″ Round Clear, Backup Lights
- All Standard Lights Are Incandescent Type
- 2.5″ Round Tube Header Frame, Bent To Shape Of Cab, With Screen In Top Half
- Toolbox Brackets Under Each Front Corner Of Bed
- Mudflap Brackets Under Each Rear Corner Of Bed
- Wiring Conduit Tubes Under Bed For Wiring Protection
- Primed & Painted With 2 Part Acrylic Polyurethane Gloss Black
Note: Triple Marker Lights In Middle Are Standard On Beds 7.5′ & Wider
Standard Deck Plate Floor
Deck Plate Floor secured to standard 2″ channel cross members spaced on approximate 12″ centers providing solid, heavy-duty weight-bearing construction.
Sideboards
| WISB72 | 6” x 72” Sideboards – 6’ Bed (Per Pair) |
| WISB84 | 6” x 84” Sideboards – 7’ Bed (Per Pair) |
| WISB96 | 6” x 96” Sideboards – 8’ Bed (Per Pair) |
| WISB102 | 6” x 102” Sideboards – 8.5’ Bed (Per Pair) |
| WISB108 | 6” x 108” Sideboards – 9’ Bed (Per Pair) |
| WISB112 | 6” x 112” Sideboards – 9’4” Bed (Per Pair) |
| WISB120 | 6” x 120” Sideboards – 10’ Bed (Per Pair) |
| WISB132 | 6” x 132” Sideboards – 11’ Bed (Per Pair) |
| WISB136 | 6” x 136” Sideboards – 11’4” Bed (Per Pair) |
| WISB144 | 6” x 144” Sideboards – 12’ Bed (Per Pair) |
| WISB168 | 6” x 168” Sideboards – 14’ Bed (Per Pair) |
| WISB192 | 6” x 192” Sideboards – 16’ Bed (Per Pair) |
| WIBNSB | Bullnose Front Sideboards (Per Pair) |
Tailboards
| WIPRG7 | Plastic Tailboard For 7’ Wide Bed |
| WIPRG8 | Plastic Tailboard For 8’ Wide Bed |
| WIMRG7 | Metal Tailboard For 7’ Wide Bed |
| WIMRG8 | Metal Tailboard For 8’ Wide Bed |
Toolboxes
| WITM1516 | 11 x 15 x 16 Toolbox |
| WITM5516 | 15 x 15 x 16 Toolbox |
| WITM1518 | 11 x 15 x 18 Toolbox |
| WITM5518 | 15 x 15 x 18 Toolbox |
| WITM1520 | 11 x 15 x 20 Toolbox |
| WITM5520 | 15 x 15 x 20 Toolbox |
| WITM1524 | 11 x 15 x 24 Toolbox |
| WITM5524 | 15 x 15 x 24 Toolbox |
| WITM1530 | 11 x 15 x 30 Toolbox |
| WITM5530 | 15 x 15 x 30 Toolbox |
| WITM5536 | 15 x 15 x 36 Toolbox |
| WITM5548 | 15 x 15 x 48 Toolbox |
| WITM8824 | 18 x 18 x 24 Toolbox |
| WITM8830 | 18 x 18 x 30 Toolbox |
| WITM8836 | 18 x 18 x 36 Toolbox |
| WITM8848 | 18 x 18 x 48 Toolbox |
Shovel Box
| WISHOVEL | 6 x 34 x 44 Shovel Box |
| WISBD | Shovel Box Divider Plate |
| WISBDR | Shovel Box Drawer For Half Width (Divided Box) |
| WISBDRF | Shovel Box Drawer For Full Width |
Misc Accessories
| WIWF1520 | Front Mud Flaps – 15” x 20” Per Pair |
| WIMF1830 | Mud Flaps – 18” x 30” Per Pair |
| WIMF2430 | Mud Flaps – 24” x 30” Per Pair |
| WIAS1520 | Anti-Sail Brackets – 15” x 20” Per Pair |
| WIAS1830 | Anti-Sail Brackets – 18” x 30” Per Pair |
| WIAS2430 | Anti-Sail Brackets – 24” x 30” Per Pair |
| WI2X3R | 2 x 3 Rectangular Tube Headboard |
| WI2X3RT | 2 x 3 Rectangular Tube Header Through Floor |
| WILV | Louvers Insert In Header |
| WIRCHL | Lights In Header ( Oval Red & Clear ) |
| WI36OV | 3 – 6” Oval Taillight Assy |
| WI2LEDAR | 2” Red Or Amber Light Upgrade LED Upgrade – Per Light |
| WI6LEDR | 6” Clear Oval Light Upgrade LED Upgrade – Per Light |
| WI6LEDC | 6” Clear Oval LED Light Upgrade- Per Light |
| WIBN | Bullnose Front ( 24” Long Standard ) |
| WICRC | Clip Rear Corners ( 6” x 12” Standard ) |
| WIRH | 3 x 4 Rectangular Tube Rear Receiver Hitch |
| WIICC34 | ICC 3 x 4 Tube Rear Receiver Hitch |
| WIPHC | Heavy Duty 8” Channel Insert For Pintle |
| WIFH | Fill-In Plate In Hitch Area With Tag Light |
| WITH | Fuel Hole In Side Of Bed (Per Hole) |
| WIFTP | Full Tail Plate For Rear Box Application |
| WIFUD | Flip-Up D-Rings In Floor (Cost Per Each) |
| WITBB | Toolbox Brackets (For 2 Boxes) |
| WIPRR | Pockets & Rail On Rear ( 4 Pockets ) |
| WIWH1 | Wiring Harness For Standard Bed |
| WIWH2 | Wiring Harness For Bed With Header Lights |
______________________________________________________________________________________________________________________________________________________________________________________________________
PRICES DO NOT INCLUDE SHIPPING OR SETUP – PRICED F.O.B. ATWOOD, KS