Maschio Cristina EVO 510 41″ Boom / Flail Mower | CAT II | 540 PTO | Min HP 70 | 16.17′ Arm Ext

PRICES DO NOT INCLUDE SHIPPING OR SETUP – PRICED F.O.B. FACTORY

*Must Add Cutting Head Kit To Complete Unit

*Hyd Oil Heat Exchanger Option Is Recommended. These Units Are Self-Contained & Run All The Time. This Can Cause The Hydraulic Oil To Heat Up Drastically & Cause Damage To The Pump

Maschio Cristina EVO

Independent hydraulic circuit with high-efficiency cast iron gear motor and pumps.
Aluminium overdrive category 3
High-strength chassis pre-engineered for 3-point hitching to cat. II
Hydraulic valve system operated by flexible cables and control unit with mechanical levers
High resistance hydraulic pipes, protected by metal guard and shockproof/splashproof spiral wrapping
Pre-engineered space for future installation of the heat exchanger
Ground pins made of hardened steel
Wear-resistant bushings with lubricating nipple
Safety system with first arm “OVER CENTER”
Safety system with adjustable mechanical shock absorber
Safety lever to prevent the rotor from reverse spin
Safety valve for unloading in case of rotor blockage
1st and 2nd points turnbuckle implement jacks
Cutting head angle 200°
540 rpm PTO
Parking stands
CE equipment

MEASURE	ARM EXTENSION	MIN TRACTOR WEIGHT	MIN WHEEL- TRACK	PTO ROTATION RPM	HYDRAULIC OIL TANK	MAX POWER HYDRAULIC MOTOR HP	MIN POWER		WEIGHT
460	14.7 ft	3,968.32 lb	5.25 ft	540	38.31 gal	50 hp	65 hp	48 kw	661.39 lb
510	16.17 ft	4,409.25 lb	5.25 ft	540	38.31 gal	50 hp	70 hp	51 kw	1,340.41 lb
560	19.19 ft	4,850.17 lb	5.91 ft	540	38.31 gal	50 hp	70 hp	51 kw	881.85 lb

Cristina Flail/Boom Mowers

Cristina Flail/Boom Mower

CRISTINA is a robust and compact hedge cutter ideal for agricultural use for cutting grass and shrubs in banks and ditches adjacent to plots of land. It can be coupled with tractors starting from 25 HP with minimum wheel track of 1,7 m and a weight of 2.000 Kg, allowing a maximum extension of 5,6 m in total safety.

Safety & Reliability

It is essential to have a high-strength robust arm to ensure maximum performance and reliability over time. The safety systems include OVER CENTER which prevents the spontaneous descent of the first arm, the adjustable mechanical safety shock-absorber, the manual closure of the independent hydraulic circuit for safe maintenance operations. Furthermore, the mechanical safety shock proof system discharges the hydraulic pressure of the rotor in case it blocks.

High Performing Heads

CRISTINA can be coupled with a 100 cm wide direct drive head which, depending on the extension versions, offers different combinations for the cutting parts, blades or hammers. The spiral type rotor allows the double rotation direction and the floating function up to 200° of rotation, ensuring maximum performance.

High Versatility

In addition to the classic heads for twigs, hedge bars for cutting shrubs up to 1.5 cm is also available. CRISTINA also allows cleaning road side ditches and channels thanks to the ditch cutter. The high efficiency of this equipment comes from the use of a hydraulic motor, an ideal solution for the drive of particular accessories that work with high extensions.

Control Units

CRISTINA model standard fitted with a hydraulic control unit with single control levers, a simple and reliable system. To speed up and simplify movements, the ON/OFF electric Joystick is available on request.

Spiral Rotor