S22 Stump Grinder | Univ Skid | 25-65 HP | 15-30 GPM | 12V Elec Actuator Swing Cyl
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB BV ATWOOD, KS
*Case Drain Required For S550 Motor Option
*Hydraulic Hoses Included – NO Couplers (See Tab Below To Add Hyd Couplers)
*The Unit Comes With Baumalight’s Auxiliary Electrical Connection. When Ordering Unit, Please Note What Model Of Skid Steer It Is Going On & The Pin Connection. Baumalight Will Equip The Unit With Your Skid Steer’s Specific Auxiliary Connection Prior To Shipment.
- A Control Box Kit Must Be Added If –
- Your Skid Steer Is Older And Does Not Have An Auxiliary Electrical Connection
*Do You Have A Newer Bobcat Skid Steer With A Specific Bobcat 7-Pin Connector?
- To Run This Unit With Your Skid Steer, You Will Either Have To Add The Control Box Kit, Add The Bobcat 7-Pin CANBUS Plug/Circuit Board Kit, Or Contact Your Bobcat Dealer For A 7-Pin To 14-Pin Adapter.
Skidsteer Stump Grinder With 12V Swing Actuator- S22
Experience best in its class, in performance and productivity with the S22 Skidsteer Stump Grinder for skidsteer which features a 12V electric linear actuator to control the swing cylinder rather than hydraulics.
This provides more power going to the rotor for more torque and faster grind times.
The Baumalight S22 stump grinder mounts on a full-sized skidsteer using the universal skidsteer adapter, ensuring compatibility and convenience of usage. Each S22 Stump Grinder comes with a complimentary set of six replacement teeth, conveniently shipped for hassle-free maintenance. It also offers more clearance with its carbide teeth extending 1-¼ inches from the rotor.
The S22 features hardened steel bushings and greaseable pins, meticulously designed for corrosion resistance and optimal joint operation over its lifetime. Sold exclusively through our trusted network of equipment dealers for superior product support, maintenance, and warranty services. Empower yourself with our comprehensive service and instructional videos in our support section for self-repair, ensuring minimal downtime and much more cost-effective service.
Model No. | S14 | S16 | S18 | S22 | S24 | S28 | S40 |
---|---|---|---|---|---|---|---|
Recommended HP Size | Mini Skidsteer | Mini Skidsteer | 25-80 | 25-65 | 30-80 | 50-120 | 50-120 |
Maximum Carrier Size | Check GPM & PSI | Check GPM & PSI | Check GPM & PSI | Check GPM & PSI | Check GPM & PSI | Check GPM & PSI | Check GPM & PSI |
Motor Type | Gerotor | Bent Axis Piston | Gerotor | Gerotor | Gerotor | Gerotor | Bent Axis Piston |
Hydraulic GPM | Check Stump Cutting Size Chart | Check Stump Cutting Size Chart | Check Stump Cutting Size Chart | Check Stump Cutting Size Chart | Check Stump Cutting Size Chart | Check Stump Cutting Size Chart | Check Stump Cutting Size Chart |
Rotor Size | 18″ | 18″ | 24″ | 24″ | 24″ | 24″ | 24″ |
Number of Teeth | 12 | 24 | 34 | 34 | 34 | 34 | 20 |
Tooth Part number | H3000 | H3000 | S1000 | S1000 | S1000 | S1000 | H3000 |
Tooth Construction | High speed | High speed | Planer | Planer | Planer | Planer | High speed |
Cutting Wheel Speed | Depends on GPM | Depends on GPM | Depends on GPM | Depends on GPM | Depends on GPM | Depends on GPM | Depends on GPM |
Cutting Height – Above Ground | No limit | No limit | No limit | No limit | No limit | No limit | No limit |
Cutting Depth – Below Ground | 6″ | 6″ | 10″ | 10″ | 10″ | 10″ | 24″ |
Maximum Cutting Depth – Per Pass | 2″ | 2″ | 5″ | 6″ | 6″ | 6″ | 1″ |
Maximum Horizontal Cut | 12″ | 12″ | 22″ | 22″ | 22″ | 22″ | 22″ |
Swing Arc | Self-feeding | 56° | Self-feeding | 60° | 60° | 63° | 85° |
Hub Torque | 150 Ft.-Lbs. | – | 250 Ft.-Lbs. | 250 Ft.-Lbs. | 250 Ft.-Lbs. | 803 Ft.-Lbs. | – |
Over Torque Protection | Relieve valve | Relieve valve | Relieve valve | Relieve valve | Relieve valve | Relieve valve | Remote |
Hitch | 1″ pivot pins | 1″ pivot pins | Mini Plate | Quick Attach | Quick Attach | Quick Attach | Quick Attach |
No. of Remotes Required – Hydraulic | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Requires 12 Volt DC | No | Yes | No | Yes | Yes | Yes | Yes |
Unit Weight (Shipping) Lbs. | 394 | 400 | 642 | – | 995 | 995 | 1,200 |
STUMP CUTTING TIMES BASED ON 24″ STUMP
Motor | Case Drain | PSI | 12 GPM | 15 GPM | 20 GPM | 25 GPM | 30 GPM | 35 GPM | 40 GPM | CC | Motor Type |
RPM at MAX GPM |
---|---|---|---|---|---|---|---|---|---|---|---|---|
S450 Motor Available for : S14,S18,S22 |
Not Required | 2,500 | 60 min | 40 min | 35 min | — | — | — | — | 125 | Roller Vane | 520 |
3,000 | 50 min | 30 min | 30 min | — | — | — | — | |||||
S550 Motor Available for : S18,S22 |
Recommended | 3,000 | — | 30 min | 25 min | 20 min | 16 min | — | — | 130 | Roller Vane | 700 |
* Motor will run at this PSI but excess pressure is dumping over relief.
CARBIDE TIPPED
Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.
MORE TEETH
The high number of teeth means that each tooth needs to do less work. Each of the Stump Grinders teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.
ROTOR
The massive ¾” thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.
Controls Overview
Auxiliary Connection (Included Standard)
*If you have a newer skid steer with auxiliary connection, please note what model of skid steer it is going on & the pin connection. Baumalight will equip the unit with your skid steer’s specific auxiliary connection prior to shipment. This Is The Ideal Solution. The operator can easily control all functions using the controls already equipped on the carrier joysticks. This allows the operator to never remove their hands from the controls to change a function.
Wired Control Box (Optional)
*If your skid steer is older & does not have an auxiliary electrical connection, you must add the wired control box. Although less than ideal, for controlling the attachment is using our wired control box. The operator would use the toggle switches on the control box to control the functions required. The wired control box requires a 12V connection to supply power.
Hydraulic Couplers
Fitting Size | Hose Description | Qty |
3/4 JIC FM | Pressure & Return | 2 |
3/8 JIC FM | Case Drain | 1 |