WLBXTR6438B

Adjustable Discharge Chute

Control the output of the chipper with the easily adjustable chute allowing the user to direct the flow of chips where they want.

Built In Toolbox

Keep your small tools and replacement parts handy.

Dual Active Rollers

Hydraulically powered top and bottom feed rollers grip and pull brush directly into the chipper.

Electric Start

Reliable and convenient starting at the turn of a key.

Fold Up Feed Hopper – No Tools

For easy transport. No tools required.

Highway Towable

Transport your unit with hitch, safety chains, highway tires, and full trailer lighting.

Oversized Heavy Duty Rotor

Extra large chipper intake backed up by extra large rotor spinning with high momentum.

Oversized Opening

Extra large chipper intake easily receives crooked branches, reducing the amount of prior trimming required.

P3 Pulse

The P3 Pulse controller is designed to enhance the machines power, performance, and productivity. The Wallenstein P3 PULSE Electronic Control System optimizes the capacity of the chipper. Operators can adjust feed settings to customize chip size when chipping any type of material. P3 tracks rotor hours of operation and provides system diagnostics. In the unlikely event the rotor becomes jammed with material, P3 quickly stops the engine to prevent clutch burn out. P3 keeps the chipper working in the peak working range by matching feed rate with rotor speed. As material is put into the chipper, a sensor on the rotor sheave continually monitors rotor rpm. If the rotor slows down under load, P3 slows the feed roller speed allowing the rotor to recover. If it slows below the minimum rotor speed setting, P3 auto-reverses the feed rollers preventing a stall out. Wood material is then pulled away from the rotor giving it the opportunity to regain speed. Once back
at operating rpm, the feed rollers start feeding material into the chipper again. P3 PULSE consists of a rugged, user-friendly 4.3″ (109 mm) display and electronic controller. From the display, the user can see all the important operating parameters. These parameters are set up depending on machine model. 

Positional Discharge Deflector

The discharge chute is equipped with a positional discharge deflector on the end of the chute to direct the chips exactly where desired.

Reversible Rotor Knives

Standard reversible rotor knives double the longevity of your knives.

Safety Control Bar

Forward/reverse control with two stop positions.

Torflex® Suspension Axle

Axles are designed to absorb road impact, providing a smoother towing experience.

Electric Brakes

Go easy on your vehicle with electric brakes.

Twig Breaker

The discharge paddle passes around the twig breaker and helps to break the material into smaller pieces and turn it into mulch.