BU727-E-5

BU727-E-5

Buffalo KwikKracker 727 Roller Mill | Elec Dr | 7×27 Rolls | 900 BPH | 5 GPI

$24,189.00

Buffalo KwikKracker 727 Roller Mill | Elec Dr | 7×27 Rolls | 900 BPH | 5 GPI

*Must Source An Electric Motor To Complete Unit (10-15HP)

 

Henke Buffalo KwikKracker 727 Roller Mills

  • 7″ Roll Diameter
  • 27″ Roll Length
  • Up To 900 BPH / 25 TPH Corn Capacity
  • Standard 1:1 Drive Ratio
  • Inlet Hopper With Control Gate & Magnet
  • Gravity Outlet Pan Is The Standard Outlet

Options

  • Differential Drive
  • Various Groove Patterns (Call For More Info)
  • 8″ x 12′ Inlet Auger With Hydraulic Drive, Carrier, & Hopper (Optional Spring List Assist For Auger)
  • Rear Auger Discharge
  • 7″ x 10′ Sloping Discharge Elevator With Mount Kit & Drive (Optional Elevator Extensions)

Henke Buffalo KwikKracker Roller Mills

Built with the operator in mind, our Roller Mills are easy to adjust, easy to operate and easy to maintain.

  • Easy-adjustment lever for setting the rolls for coarse or fine crack
  • Each Roller Mill comes with magnets as standard equipment on the inlet hopper to prevent metallic debris from getting into the gain
  • Rolls are heat-treated to Rockwell C-62 – some of the hardest in the industry
  • Henke Roller Mills come in a wide variety of roll sizes from 18″ to 54″ in length
  • Easy access shields for ease in service and maintenance
  • Standard one-to-one ratio drive produces a finished product with minimum fines; optional differential drive is also available for a finer rolled finished product
  • Two-high Roller Mills are available featuring coarse-corrugated top rolls and fine-corrugated bottom rolls to allow for additional particle size reduction

BPH = Bushels Per Hour

TPH = Tons Per Hour

*Corn based on coarse-cracked, dry, shelled corn (except for the ear corn mill)

**Grinding based on dry, shelled corn and using a differential drive.

The primary difference between a 1:1 roller mill and a differential drive roller mill lies in the roll speeds and the resulting material processing method:

  • 1:1 Mill (Even Speed): Both rolls in a pair rotate at the same speed, providing a consistent, uniform crush primarily through compression. This is ideal for applications like crimping grain for livestock feed where a consistent crush profile and preservation of the grain structure are important.
  • Differential Drive Mill (Different Speeds): One roll rotates faster than the other, introducing a significant amount of shearing action in addition to compression. This shearing is used for a finer, more aggressive grind, suitable for processing certain types of feed where a smaller, more uniform particle size is desired.
Feature  1:1 Roller Mill Differential Drive Mill
Roll Speeds Both rolls operate at the same speed (1:1 ratio). One roll turns faster than the other (e.g., a 1:1.4 ratio).
Primary Action Cracking or crimping. Shearing and grinding.
Resulting Product Coarser, cracked grain with a low level of fines. Finer, more uniform particle size.
Best Use Case Used when a coarser particle size is desired for ruminant digestion (cattle, beef). Used when a finer, more consistent grind is needed, such as for high-moisture corn, pelleted feeds, or for swine and poultry diets.
Capacity Generally has a higher processing capacity for the same size mill when running dry grain. May have a lower capacity compared to a 1:1 mill when processing the same volume of product, but achieves a finer grind.