T3 Post Driver
The T3 Post Driver is a small driver that delivers big time results! The T3 Driver will drive T-posts up to a 3″ O.D. (outside diameter) pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. We offer several mounting options, including an offset skid-steer quick attach which allows the operator to drive parallel to the fence line, a bolt-on/weld-on bracket that mounts to almost any flat surface, and a tilt bracket for up to 20° adjustments left or right. Use down pressure from the host vehicle to drive more posts in the ground faster. The T3 Driver includes one bolt-on/weld-on bracket, hoses and flat face ISO couplers for simple plug and play operation. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards.
| Warranty |
| 1-year |
| Post Dimensions: | T-post to 3″ O.D. pipe |
| Impact Force: | 2,000 lbs. per stroke |
| Impact Energy: | 40 ft.-lbs. per stroke |
| Hammer Weight: | 10 lbs. |
| Strokes Per Second: | 6 |
| T3 Driver | Skid‑Steer | Skid‑Steer Offset | Euro/Global | John Deere 200-500 Series | |
| Overall Depth | 12″ | 14″ | 18″ | 16″ | 15″ |
| Overall Width | 11″ | 45.5″ | Extendable 50.5″-86.5″ | 45″ | 49″ |
| Overall Height | 17″ | 19″ | 21″ | 24″ | |
| Weight | 86 lbs. | 173 lbs. | 286 lbs. | 181 lbs. | 193 lbs. |
| Hydraulic Requirements | 1500-3000 PSI & Up to 30 GPM* | ||||
T3 Driver will operate at 6 strikes per second on vehicles with 15-30 GPM. It will function at fewer strikes per second below 15 GPM.
| DA21305 | Universal Skid T3 Driver Quick Attach Plate – Equipped with center or offset mounting options. Integrated post puller. |
| DA21355 | Universal Skid Offset Quick Attach Plate – Telescopes left or right 5′ from center in 6″ increments. Includes two 4′ long x 1/2″ hose extensions and hitch pin with clip. Integrated post puller. |
| DA21303 | Euro/Global Quick Attach Plate – Integrated post puller. |
| DA21304 | John Deere 200/300/400/500 Series Quick Attach Plate – Chain slot available for depth control. Integrated post puller. |
| DA21301 | Tilt Bracket Assembly – Tilt left or right up to 20° in 7° increments. Hardware included. |
| DA21302 | Mount Bracket – Bolt-on/Weld-on bracket that mounts to a flat surface. Hardware not included. |
| DA21356 | Plumb Bob – Provides vertical line reference for operator. |
| DA196056 | Front-End Loader Hose Kit – 1/2″ hose kit, 25’ long, with flat face ISO couplers and pioneer couplers. Mounting bracket included for bolting or welding. Hardware not included. |
______________________________________________________________________________________________________________________________________________________________________________________________________
PRICES DO NOT INCLUDE SHIPPING OR SETUP – PRICED F.O.B. FACTORY
| Weight | 84 lbs |
|---|