GARGGB1400RS
14′ Garfield Grader Blade With Rear Steer | 120-400 HP Req | Cut Depth 10″
$27,919.00
Weight: 6032lbs
14′ Grader Blade With Rear Steer | 120-400 HP Req | Cut Depth 10″
Note: Rear Steers Require 4 Valve Banks
Add Elec-Hyd Valves If Needed – See Options
• Swivel Hitch
• Case Hardened Pins & Bushings
• Center Greasing Pins
• 1-1/2” Cylinder Pins
• 3/8” Thick Moldboard (Most Others Use 5/16”)
• Box Gussets On The End & All Along The Bottom Of The Moldboard
• Price Per Pound Is Cheaper Than Most Other Competitors
• 26 Ply Tires
• Rear Steer & Wings Are Standard
• Include Welded Cylinders vs Competitors Are Tie Rod
• Reversible Cutting Edge
• Garfield 1400 empty Is About The Same Weight As Most Competitors With Concrete In The Weight Box.
• Garfields Weight Box Holds About 2200 lbs.
| FEATURES | 1000RS | 1200RS | 1400RS | 1600RS |
|---|---|---|---|---|
| FT/Working Width | 10′ | 12′ | 14′ | 16′ |
| DEG/Horizontal Angle | 40° | 40° | 45° | 45° |
| IN/Tilt Angle | 0-15° | 0-15° | 0-15° | 0-15° |
| IN/Depth of cut | 6″ | 6″ | 10″ | 10″ |
| IN/Ground clearance | 0-25″ | 0-25″ | 0-30″ | 0-30″ |
| LBS/Weight | 3,160.5 | 3,286 | 5,840 | 6,028 |
| HP/Power Required | 70-125 | 70-125 | 120-400 | 120-400 |
| FT/Overall width | 6’8″ | 6’8″ | 8′ | 8′ |
| IN/Overall height | 39″ | 39″ | 54.5″ | 54.5″ |
| FT/Overall length | 19’6″ | 19’6″ | 21’5″ | 21’5″ |
| IN/Horz. Angle Cylinder | 4″x24″x2″(1) | 4″x24″x2″(1) | 5″x24″x2-1/2″(2) | 5″x24″x2-1/2″(2) |
| IN/Lift Cylinder | 4″x12″x2″(1) | 4″x12″x2″(1) | 4″x16″x2″(1) | 4″x16″x2″(1) |
| IN/Tilt Angle Cylinder | 3″x8″x1-1/2″(1) | 3″x8″x1-1/2″(1) | 4″x12″x2″(1) | 4″x12″x2″(1) |
| IN/Steering Cylinder | 3″x8″x1-1/2″(1) | 3″x8″x1-1/2″(1) | 4″x8″x2″(1) | 4″x8″x2″(1) |
| Tire Size | 11L15 | 11L15 | 40×14.5×19 | 40×14.5×19 |
Features
When you have a big job, you need the toughest grader blade on the market. The Garfield Grader Blade comes in 4 widths from 10′ to 16′.
All models have a Hydraulic Rear Steer which allows the operator to move the blade 4 feet more to the left or the right side of the tractor hydraulically from the tractor seat. The Rear Steer feature allows the Rear Steer grader to clean along feedlot fences, buildings, road edges, trees, etc. without having to drive the tractor so close to the objects that you are working near. The standard rear steer offset gives the Grader the capability to clean out irrigation and drainage ditches that are wet, while keeping the tractor on drier ground, but most importantly, together with the massive weight, it allows you to counter side draft.
All models come standard with fold down sides, turning your grader into a box scraper, which allows you to carry more material.
The Garfield Grader blade Is the perfect tool for:
- Terraces
- Road maintenance
- Waterways
- Ditches
- Site prep
- Snow removal
Add Elec-Hyd Valves If Needed (Note: These Elec-Hyd Valves Must Be Installed @ The Factory)
| GARHEVRS-2 | Elec-Hyd Valve for 2>1 |
| GARHEVRS-3 | Elec-Hyd Valve for 3>1 |
| GARHEVRS-4 | Elec-Hyd Valve for 4>1 |
Options
| GAR600WT | 600 lb. Wt. Concrete |
______________________________________________________________________________________________________________________________________________________________________________________________________
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED F.O.B. FACTORY
| Weight | 6032 lbs |
|---|