HSHC4112
H&S HC4112 Hi Capacity Bi-Fold Rake | Single Axle | 12 Wheels-55″ | Up To 24′ Raking Width
$21,780.00
Weight: 3500lbs
| 4112 | |
|---|---|
| NUMBER OF WHEELS | 12 |
| WHEEL DIAMETER | 55″ |
| TEETH PER WHEEL | 40 |
| TOOTH DIAMETER | 7mm |
| TRANSPORT WIDTH | 8′ 6″ |
| TRANSPORT LENGTH | 24′ 6″ |
| WINDROW WIDTH ADJUSTMENT | 38″- 58″ |
| RAKING WIDTH | UP TO 24′ HYD. SET. |
| RAKING WHEEL HUBS | TAPERED BEARINGS |
| WING FLEX | 3′ UP OR DOWN |
| NUMBER OF TRANSPORT WHEELS | 4 |
| HITCH JACK | STANDARD |
| CENTER KICKER WHEELS | OPTIONAL |
| GAUGE WHEELS | 15″ |
| TRANSPORT WHEELS | 15″ |
| WEIGHT | 3500 LBS. |
| 4114 | |
|---|---|
| NUMBER OF WHEELS | 14 |
| WHEEL DIAMETER | 55″ |
| TEETH PER WHEEL | 40 |
| TOOTH DIAMETER | 7mm |
| TRANSPORT WIDTH | 8′ 6″ |
| TRANSPORT LENGTH | 27′ 3″ |
| WINDROW WIDTH ADJUSTMENT | 38″- 58″ |
| RAKING WIDTH | UP TO 28′ HYD. SET. |
| RAKING WHEEL HUBS | BALL BEARINGS |
| WING FLEX | 3′ UP OR DOWN |
| NUMBER OF TRANSPORT WHEELS | 6 |
| HITCH JACK | STANDARD |
| CENTER KICKER WHEELS | OPTIONAL |
| GAUGE WHEELS | 15″ |
| TRANSPORT WHEELS | 15″ |
| WEIGHT | 3800 LBS. |
| 4116 | |
|---|---|
| NUMBER OF WHEELS | 16 |
| WHEEL DIAMETER | 55″ |
| TEETH PER WHEEL | 40 |
| TOOTH DIAMETER | 7mm |
| TRANSPORT WIDTH | 8′ 6″ |
| TRANSPORT LENGTH | 30′ 3″ |
| WINDROW WIDTH ADJUSTMENT | 38″- 58″ |
| RAKING WIDTH | UP TO 32′ HYD. SET. |
| RAKING WHEEL HUBS | BALL BEARINGS |
| WING FLEX | 3′ UP OR DOWN |
| NUMBER OF TRANSPORT WHEELS | 6 |
| HITCH JACK | STANDARD |
| CENTER KICKER WHEELS | OPTIONAL |
| GAUGE WHEELS | 15″ |
| TRANSPORT WHEELS | 15″ |
| WEIGHT | 4200 LBS. |
Raking Width
- Front : 0 to 24′
- Back: 38″ to 58″
Features
- Raking wheels positioned ahead of the rake arms, main frame beams and transport wheels.
- Coupled with a high and wide end of frame there are no hang-up points or restrictions when raking the heaviest of hay crops. Windrow width adjustment is done with a hand crank.
- Rake opens and closes hydraulically, rake wheels are lowered and raised hydraulically, and the rake wheels float independently.
- The rake arms on the 14 and 16 wheel hi-capacity rakes feature 2 roller bearings on each end of the arm for long life, smooth operation and less wear than rakes with bushings.
- Hi-Capacity rakes fold up to 8′ 6″ or less with the touch of a lever for road transport or to go through gates.
- Limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks. Standard on the 14 & 16 wheel models and optional on the 12 wheel model.
- An adjustment for the ground pressure on the rake wheels allows the operator to fine tune the 12, 14 and 16 wheel Hi-Capacity rakes to fit varying conditions.
- An adjustable brake band on top of the front spindle keeps the front gauge wheels from spinning in rough conditions.
H&S Center Kicker Wheels (2) With Hyd Lift | For All SN's Of BF12HC Rakes & 4112 Rakes
$3,125.00
H&S Set Of Tandem Rear Wheels | For: HC4112
$1,874.00
Transport Lighting | For HC Rakes (Specify Model)
$1,187.00
Wind Panel Kit for 55" Wheel 31-1/2"
$44.00
H&S 55" RH Replacement Rake Wheel
$135.00
Tailight Kit | For: HC Rakes
$854.00
H&S Safety Chain Kit | 10, 100 lbs. Capacity
$85.00
H&S 55" LH Replacement Rake Wheel
$135.00
H & S 55" Rake Wheel Tooth {EACH} {OT-1A} | Packed In Bundles Of 40
$2.05
| Weight | 3500 lbs |
|---|