HSRM7117
Roller Mixer | 135 Bu.-167 Cu. Ft. | 18″x16″ Cast Rolls | 6 GPI |8″x12′ Unloading Auger | 540 PTO
$86,304.00
Roller Mixer | 135 Bu.-167 Cu. Ft. | 18″x16″ Cast Rolls | 6 GPI |8″x12′ Unloading Auger | 540 PTO
Back Freight: $1,495
Features
- 167 Cu. Ft. / 135 Bu Capacity
- 14″ Mixing Auger With Self-Aligning 30″ Base
- Independent Mixer Drive
- 18″ x 16″ Diameter Chill Cast Rolls With 6 GPI (Grooves Per Inch) Are Standard (4,5,8,10,12, Or 15 GPI Rolls Can Be Special Ordered)
- Quick Change Worm Drive Roll Adjustment
- Leaf Spring Roll Protection
- Top Hopper With Grate Magnet To Remove Any Metal That May Accidentally Mix With The Material Entering The Mill.
- 540 PTO
- Shear Bolt Protection On The Mixing Auger & Transfer Auger Drive
- Self-Contained Hyd System With 15 Gallon Reservoir & Filter
- Side Supplement Hopper With Sack Cutter
- 240-Degree Swing | 12′ Discharge Auger | (2) Tractor Remotes (1 For Swing – 1 For Lower / Raise)
- 8″ x 12′ Unloading Auger Length (Standard)
- Weigh Bars/ Spindles Scale System (Excluding Monitor)
- Front & Side Scale Mount Location
- Non-Slip Ladder
- Overload Protection Release Top Tank Door
- 12.5L x 15 20 Ply Tires
- Fenders
- Jack
- Transport lights & Power Cord
RM7117 ROLLER MIXER |
|
| TANK CAPACITY-BUSHEL | 135 |
| TANK CAPACITY-CUBIC FT. | 167 |
| TANK DIAMETER | 74″ |
| DIAMETER OF MIXING AUGER | 14″ Diameter w/30″ Base |
| LADDER | Foldable Rear Mount Non-Slip |
| TANK WINDOWS | 5-Port Hole Style |
| OVERALL HEIGHT | 10′ 8″ |
| OVERALL WIDTH | N/A |
| OVERALL LENGTH | 15′ |
| GROUND CLEARANCE | 12″ |
| SUPPLEMENT HOPPER | Side Mounted | Optional Rear Hopper |
| FEEDER | Standard Gravity Hopper | Optional Swinging Intake Augers |
| PTO DRIVE | 540 RPM |
| H.P. REQUIREMENT | 540 RPM up to 125 HP |
| TIRES | 12.5L – 15 – 20 Ply |
| JACK | Standard |
| WEIGHT | N/A |
| DRIVE SYSTEM | |
| SELF-CONTAINED | Includes Pump, 15 Gallon Reservoir w/Filter and Pressure Relief Valve |
| PUMP PRESSURE | 3,200 PSI Maximum |
| OIL FLOW | 12 G.P.M. |
| DISCHARGE AUGER SYSTEM | |
| UNLOADING AUGER TUBE DIAMETER | 8″ |
| UNLOADING AUGER LENGTH | 12′ |
| UNLOADING AUGER ROTATION | 240 Degrees |
| UNLOADING AUGER REACH STANDARD | Approx. 19′ at 53 Degrees |
| UNLOADING AUGER W/3′ EXTENSION | Approx. 21′ 6″ at 53 Degrees |
| UNLOADING AUGER W/6′ EXTENSION | Approx. 23′ 10″ at 53 Degrees |
| ROLLER MILL SPECIFICATIONS | |
| Rolls | 2 – 18″ Wide x 16 Diameter Chill Cast Rolls |
| Roll Drive | 540 RPM Direct |
| Grooves Per Inch (GPI) | Choice of 4, 5, 6, 8, 10, 12 or 15 GPI Rolls |
| Roll Protection | Leaf Spring |
| Magnets | Top Hopper w/Grate Magnet |
______________________________________________________________________________________________________________________________________________________________________________________________________
Back Freight: $1,495
PRICES DO NOT INCLUDE SHIPPING OR SETUP – PRICED F.O.B. FACTORY