HSTD1240
H&S 40′ 1200 Series Top Dog Semi-Trailer Forage Box | Dual Hyd Drive | Poly Floor | Stainless Sides
$131,362.00
1200 Series Top Dog Semi-Trailer Forage Box Standard Features
- 8′ Inside Width With Solid Poly Floor
- Stainless Steel Sides/Front Panel/Rear Door
- Full Length I-Beam Main Frame
- (2) 25,000 lb Spring Suspension Axles
- ABD Brake System
- Mesh Screen Top Sides
- Bolted Front Flip Down Panel (Electric Actuator Control Optional)
- Double Gearbox Drive System
- Hydraulic Drive System With 1″ Hydraulic Lines
- PL88C Open Barrel Pintle Apron
- Automatic Locking/Unlocking Tailgate
- LED Highway Lighting
| Forage Box | TD1236 | TD1240 |
| Capacity Cu. Ft. Struck Level Per ASAE S324.2 | 2,045 | 2,275 |
| Box Weight | 18,240 lbs. | 20,270 lbs. |
| Inside Length | 36′ | 40′ |
| Inside Width | 98″ | 98″ |
| Inside Height | 86″ | 86″ |
| Overall Length | 37′ 7″ | 41′ 7″ |
| Overall Width | 102″ | 102″ |
| Overall Height Including Tailgate | 13′ | 13′ 1 1/2″ |
| Side Height | 147″ | 147″ |
| Drive System | Dual Hydraulic Motors | Dual Hydraulic Motors |
| Final Drive System | Dual Gear Case Drive System | Dual Gear Case Drive System |
| Main Apron Chain & Slats | PL88C Open Barrel Pintle 2″ x 1″ x 3/16″ Formed Apron Channels | PL88C Open Barrel Pintle 2″ x 1″ x 3/16″ Formed Apron Channels |
| Unload Time | Dependent on Tractor/Truck Hydraulic System & GPMs | Dependent on Tractor/Truck Hydraulic System & GPMs |
| Rear Drive Shaft | 2 ¼″ 1045 Steel | 2 ¼″ 1045 Steel |
| Front Idler Shaft | 1 ¾″ 1045 Steel | 1 ¾″ 1045 Steel |
| Uprights | 2″ x 2″ x 3/16″ Tubular Steel Set on 16″ Centers | 2″ x 2″ x 3/16″ Tubular Steel Set on 16″ Centers |
| Wall Material | Stainless Steel | Stainless Steel |
| Floor Material | Virgin Grade Poly | Virgin Grade Poly |
| Air Gate Delay System | Standard | Standard |
| Rear Door Latching | Automatic | Automatic |
| Front Viewing Windows | 3 | 3 |
| Lights | LED | LED |
| Customer Farm Name | Standard | Standard |
| Rear Door(s) w/Auto Lock/Unlock | Top Pivot Door w/Dual Cylinder Hydraulic Gate Delay or Barn Doors w/Air Closure (Truck Mount) | Top Pivot Door w/Dual Cylinder Hydraulic Gate Delay or Barn Doors w/Air Closure (Truck Mount) |
Idler Apron Shaft & Tension Adjustment
Apron tension adjustment is made by tightening the 4 spring-loaded tightener bolts on the front of the box (A). The spring-loaded tighteners maintain tension on the apron during start-up and operation. The idler apron shaft assembly features 6-tooth machined steel sprockets with bronze idler bushings.
(Shown With Shield Open)
Axles
New 25,000# spring axles with heavy-duty spindles. An air ride suspension system is optional.
Windows
(3) windows in the front panel of the TOP DOG allow you to check for complete clean-out.
Mud Panels
Panels above the wheels act as a chain slide for the main apron and protect mud and debris from getting to the apron chain.
Front Flip Down Panel
All Big Dog & Top Dog models have a NEW, LARGER bolted Front Flip Down Panel
Chain & Floor
The PL88C OPEN BARREL main apron pintle chain @ 29,900# per strand stays flexible. 2″ x 1″ x 3/16″ formed apron channels are used for the apron cross bars. The floor is ½″ thick virgin grade solid poly.
Frame
The rear main frame is made of high-quality 10″ I-beams with a newly designed front gusseted I-beam frame. Floor cross channels are 4″ structural steel channel welded to the I-Beams and side skirts. Side stakes are 2″ x 2″ x 3/16″ tubular steel with a 14″ spacing between them. Side stakes are welded to the bottom 9 5/8″ side skirt and the top 12 ¼″ side skirt.
Tires/Rims (Required-Select One)
