WLBMM230-C508

ARMOURED AND SLEEVED HYDRAULIC HOSES

Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.

BENT AXIS PISTON MOTOR

Our Industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for pruning, trimming and land clearing. Built to last, these reliable motors can double the power of your output flow.

30 AMPS FUSED POWER SUPPLY REQUIRED

The 12V power source must be equipped with a 30 amps fuse for the constant power to the electric swing actuator. If your skidsteer does not have a 30-amp fuse then we suggest running a separate a wire directly connected to the battery using a heavy wire. Fuses rated below 30 amps will fail during normal operation, there is nothing an operator can do to avoid that as the slip clutch in the electric swing actuator is set to draw up to 30 amps before it actuates.This is just for the constant power, the directional signal wires can be fused at a lower amperage.

Slasher Blades

Crafted from 1/4″ AR 400 steel, the unique profile of the slasher blades provides increased cutting surface. The blade’s thin reversible profile continuously provides a sharp edge.

Blade Mount

To secure slasher blades to the blade assembly, Baumalight uses Gr. 8 bolts capped off with castle nuts and cotter pins. The blade mount uses a fully welded collar to drop the blade; this spacing helps to reduce the blade from binding while in operation.

2-Way Model

2-Way models feature a durable one piece rotor assembly. Constructed of a single 3/4″ plate of steel and finished with a slasher blade on each end. The 2-way blade models provide up to 26 slashes per second.

FREE BLADE SET

All Barrier Mower come with a free set of replacement blades on a new purchase. These replacement blades are conveniently secured on the wooden shipping skid.

CASE DRAIN – VENT TO ATMOSPHERE

To prevent pressure relief activation on the motor seal, the BMM230 comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance.

Powder Coated Finish

Heavy-duty construction and a durable powder-coated finish.

Shield

To protect the output shaft from impact or contamination caused by debris, each model of Barrier Mower is finished off with a heavy-duty output shaft shield.

COMMON INDUSTRY MINI SKIDSTEER MOUNT

Quickly and easily mount the Barrier Mower to mini skidsteer with the common industry mount plate.

GREASEABLE PINS

Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.

HARDENED STEEL BUSHING

Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.