WLBX72RI
Wallenstein BX72RI Chipper | CAT I/II | 7″ Cap | 45-85HP | 3-6GPM | Hyd Feed W Elec P3 Speed Control
$14,250.00
Weight: 1300lbs
Wallenstein BX72RI Chippers
- PTO Driven
- 7″ Chipping Capacity
- Dual Driven Hydraulic Rollers
- P3 Electric Roller Speed Control
7″ chipping capacity, the BX72RI PTO driven wood chipper will handle all your rural or fence line property projects. The two feed rollers are driven by two hydraulic motors and matched with automatic roller speed control. This keeps the oversized heavy duty rotor spinning and processing through all your wood and brush piles.
| Chipping Capacity | 7″ (18 cm) |
| On-Board Intelligence | P3 Pulse™ |
| Chipper Type | Disc |
| Feed System | Dual Hydraulic Roller Feed |
| Engine HP Range | 45 – 85 |
| Required Hydraulic Flow | 3 – 6 gpm (12 – 23 lpm) |
| Chipper Hopper Opening | 26” x 35” (66 cm x 89 cm) |
| Chipper Rotor Opening | 7″ x 12″ (18 cm x 31 cm) |
| Number of Chipper Knives | 4 |
| Rotor Diameter | 28” (71 cm) |
| Rotor Weight | 185 lbs (84 kg) |
| Discharge Chute Height | 90” (228 cm) |
| Discharge Chute Rotation | 360° |
| Drive System | PTO Direct Drive |
| Rated RPM | 540 – 1000 |
| PTO Height | 26″ (66 cm) |
| Total Weight | 1300 lbs (590 kg) |
| Dimensions Open (LxWxH) | 108″ x 64″ x 90″ (275 cm x 163 cm x 228 cm) |
| Dimensions Folded (LxWxH) | 83″ x 56″ x 90″ (211 cm x 143 cm x 228 cm) |
| Mounting System | Cat I iMatch™ & Quick Hitch Compatible Cat II |
Adjustable Discharge Chute
Control the output of the chipper with the easily adjustable chute allowing the user to direct the flow of chips where they want.
Bearing Plate Protection Keeps wood chips from getting into the bearing and causing damage. 
Cat I Quick Hitch Compatible Easily attach to your tractor without leaving your seat. 
Dual Active Rollers Hydraulically powered top and bottom feed rollers grip and pull brush directly into the chipper. 
Fold Up Feed Hopper – No Tools For easy transport. No tools required. 
Oversized Heavy Duty Rotor Extra large chipper intake backed up by extra large rotor spinning with high momentum. Oversized Opening Extra large chipper intake easily receives crooked branches, reducing the amount of prior trimming required. P3 Pulse The Wallenstein P3 PULSE Electronic Control System optimizes the capacity of the wood chipper. The P3 PULSE consists of an electronic controller and indicator panel. A rugged, user-friendly 4.3″ (109 mm) display is available as an option and replaces the indicator panel. The P3 PULSE tracks the rotor hours-of-operation and keeps the wood chipper working in the peak operating range by matching the feed rate with the rotor speed. As material is put into the chipper, a sensor on the rotor sheave continually monitors rotor rpm. If the rotor slows down under load, the P3 PULSE slows the feed roller speed, which allows the rotor to recover. If the rotor slows to below the minimum rotor speed setting, the P3 PULSE auto-reverses the feed rollers to pull material away from the rotor. When the rotor speed returns to the operating rpm, the P3 PULSE returns the feed rollers to forward motion to resume feeding material into the wood chipper Positional Discharge Deflector The discharge chute is equipped with a positional discharge deflector on the end of the chute to direct the chips exactly where desired. Reversible Rotor Knives Standard reversible rotor knives double the longevity of your knives. Safety Control Bar Forward/reverse control with two stop positions. Shearbolt Protected PTO Drivetrain Move on from a power spike by simply replacing a single shear bolt. Twig Breaker The discharge paddle passes around the twig breaker and helps to break the material into smaller pieces and turn it into mulch.
| Weight | 1300 lbs |
|---|---|
| Color | "Black", "Blue", "Orange", "Red", "Yellow", "Grey", "Green", "Realtree APX", "Realtree Edge" |