WLCXC530-HX508

Baumalight CXC530 40″ Brush Cutter | 2-10 T Exc | Max Brush Size 3.5″ | HX508 Motor | 3 Blades

$8,120.00

Weight: 550lbs

Baumalight CXC530 40″ Brush Cutter | 2-10 T Exc | Max Brush Size 3.5″ | HX508 Motor | 8-14 GPM | 3 Blades

*Hydraulic Hoses & Couplers NOT Included

*Requires Critical Case Drain- See Info Below

*Must Add Excavator Mount To Complete – See Below

*PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY

 

CXC530 Excavator Rotary Brush Cutter

Taking the rotary Brush Cutter mower to new heights is the 30” compact CXC530 model for mini-excavators. Built to help you tackle the areas with limited access, the CXC530’s unique blade design attacks and cuts thick brush, reducing it to mulch. The reversible blades provide long performance before requiring sharpening or replacement. The tri-swing blades chop and mulch all the way to the ground, allowing operators to mulch whole trees. Giving bite to the blade is an industry-leading bent axis piston motor, making the best possible use of this rotary mower’s hydraulic flow and pressure.
We offer multiple motors to exact match your flow so be sure to checkout the motor options area of the page below to maximize your work as you clear land with your excavator.

Model No. CXC530 CXC542 CXC550
Baumalight Connection Code A02 A02 A03
Available Motor Options HX508, HX510, HX530 HX530, HX550, HX570 HX550, HX570, HX590
Recommended GPM Check Motor Options Chart
Maximum Brush Size 3.5″ 5″ 6″
Discharge Protection Open Front and Back
Path Width 40″ 50″ 67″
Cutting Width 30″ 42″ 50″
Low Cutting Height 2.5″ 2.5″ 2.5″
Number of Blades 3 3 3
Slashes per Second 80 80 90
Attachment Type Bolt-On
Maximum HP Check Flow & PSI on Carrier
Min Carrier Weight 2 ton 3 ton 8 ton
Max Carrier Weight 10 ton 15 ton 20 ton
System Protection Hydraulic Relief Value
Deck Structure 1/4″ AR400 steel 1/4″ AR400 steel 3/8″ AR400 steel
Unit Weight 550 lbs 640 lbs 1,380 lbs

THREE CUTS PER PASS

As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Brush Cutt advances forward. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 75–100 slashes per second with devastating results. The Brush Cutt’s reversible/replaceable blades are made of long lasting 1/2″ AR 400 steel.

LARGE BEARING SUPPORT

Carburized alloy steel shafts are standard measuring 2.95″ in diameter at the bearings and weighing substantial 104lbs. Built with high quality double-lip oil seals and using an ISO class external bearing locknut system.

BLADE MOUNT

To secure slasher blades to the blade assembly, Baumalight uses Gr. 8 bolts capped off with castle nuts and cotter pins.

3-WAY MODEL

Designed for easy service, the 3-Way models feature a heavy duty rotor with 3 fixed extensions. Each extension is finished off with a slasher blade. This configuration is capable of providing 75–100 slashes per second.

DECK STRENGTH

Taking back your property can be a rough job. We designed and built the deck as a solid platform to take on the task. Built from rugged 1/4 inch steel and then further reinforced with support channels it’s a solid base of operations.

BENT AXIS PISTON MOTOR

Our industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for your brush clearing needs.

ROTOR

Using a 1″ top plate and a 1″ bottom plate this heavy-duty rotor sandwiches the three–way blade assembly in place.

BRUSH CUTTING SIZE CHART (Brush Diameter in Inches)

MOTOR PSI CASE DRAIN 6
GPM		 12
GPM		 15
GPM		 20
GPM		 25
GPM		 30
GPM		 35
GPM		 40
GPM		 45
GPM		 50
GPM
RPM 827 1637 2045
HX508 3000
3500
4000		 Critical 0.5″
0.75″
1.25″		 2″
2.5″
2.75″		 2.25″
2.75″
3″		 –
–
–		 –
–
–		 –
–
–		 –
–
–		 –
–
–		 –
–
–		 –
–
–
RPM 1190 1492 1990
HX510 3000
3500
4000		 Critical –
–
–		 2.25″
2.75″
3″		 2.5″
3″
3.25″		 2.75″
3.5″
3.75″		 –
–
–		 –
–
–		 –
–
–		 –
–
–		 –
–
–		 –
–
–
RPM 1075 1450 1800
HX530 3000
3500
4000		 Critical –
–
–		 –
–
–		 2.75″
3.5″
3.75″		 3″
3.75″
4″		 3.5″
4″
4.25″		 –
–
–		 –
–
–		 –
–
–		 –
–
–		 –
–
–
RPM 1072 1340 1600
HX550 3000
3500
4000		 Critical –
–
–		 –
–
–		 –
–
–		 3.5″
4″
4.25″		 3.75″
4.25″
4.5″		 4″
4.5″
4.75″		 –
–
–		 –
–
–		 –
–
–		 –
–
–
RPM 1019 1223 1427 1631
HX570 3000
3500
4000		 Critical –
–
–		 –
–
–		 –
–
–		 –
–
–		 4″
4.5″
4.75″		 4.5″
5″
5.5″		 5″
5.5″
6″		 5.5″
6″
7″		 –
–
–		 –
–
–
RPM 946 1100 1260 1420 1580
HX590 3000
3500
4000		 Critical –
–
–		 –
–
–		 –
–
–		 –
–
–		 –
–
–		 5″
5.5″
6″		 5.5″
6″
7″		 6″
7″
8″		 7″
8″
9″		 8″
9″
10″

Triple diameter capacity for felling trees, a rotor speed of over 1,800rpm is not recommended on 42″ or larger.

What Is A Case Drain Line ?

On most skidsteer and excavator Hydraulic systems, Hydraulic motors and pumps require a case drain line. Sometimes referred to as a third line, the case drain line will relieve any excess pressure and drain it back to your return line, then into the reservoir. Without a properly installed case drain, that extra pressure could blow a seal or damage your hydraulic line. For higher flow motors or on piston and gear motors, a case drain line is always required. Although, no matter the size of your motor, a case drain is always a good idea as it will relieve the amount of pressure on your shaft seal, helping to prolong its life. A case drain line can also increase the efficiency of your hydraulic system as it will lower the back pressure on the tank line.

Since most machines have a unique style of coupler, BaumaLight does not include a coupler on our case drain line, although they are available. If your skidsteer is not equipped with a case drain, then it can be field installed.

How Important Is A Case Drain Line ?

If we say having a case drain is critical and you operate without one, you will blow out your shaft seal. Be sure to check the motor sizing charts on our website.

Exception If You Have A Hammer Valve

There is one exception in the need for a case drain on gear motors and that is if you excavator is equipped with a hammer valve, this is a larger free flow line back to tank.

Identifying Your Case Drain Line

The following galleries show a highlighted case drain line on multiple skidsteer and excavator models.

Excavator Mounting

Baumalight offers two options to mount your attachment on your excavator, blank weld-on plates & turn key custom solutions. All Baumalight excavator mounting options are manufactured in Canada and our team of experts will work with you to ensure you receive the best solution for your excavator.

Blank Weld-On Plates

The bank weld-on plate is designed for you to weld on your own ear lugs for your specific excavator mount. The bolt pattern in the plate lines up with the bolt pattern on Baumalight attachments, allowing you to bolt the attachment in place.

Turn-Key Custom Solutions

A fully customized solution, the team at Baumalight designs and builds your custom excavator adaptor for your specific excavator to ensure that the attachment is ready to go to work as soon as it arrives.

WLD001161

Baumalight Blank Weld On Plate Without Bolts | For 1.5T To 10T Excavators $224.00
Add to List

WLD004951

Baumalight Set Of (10) 5/8" x 2" G5 Bolts With Lock Nuts | FREE If Mount Is Ordered With Wholegood $148.00
Add to List

Add Connection Code

WL-A02

Baumalight A02 Small Bolt-On Plate Connection Code (D001161) $0.00
Add to List

Click The Link Below To Find Your Specific D00**** Ex Mount

My Baumalight Excavator Mount

Add Turn Key Option That Corresponds With Your D00****

Please Note Your D00**** When Ordering

The Turn Key Pricing Includes The Connection Code Price

WLEXTURNKEY-CLASS10-CROSSPIN

Baumalight 10-11T Exc TurnKey Cross Pin Mount | Include Your D00**** In Notes When Ordering $3,440.00
Add to List

WLEXTURNKEY-CLASS10-PIN/GRAB

Baumalight 10-11T Exc TurnKey Pin/Grabber Mount | Include Your D00**** In Notes When Ordering $2,150.00
Add to List

WLEXTURNKEY-CLASS10-WEDGE

Baumalight 10-11T Exc Turn Key Wedge Mount | Include Your D00**** In Notes When Ordering $1,450.00
Add to List

WLEXTURNKEY-CLASS5-CROSSPIN

Baumalight 1.5-6T Exc TurnKey Cross Pin Mount | Include Your D00**** In Notes When Ordering $2,160.00
Add to List

WLEXTURNKEY-CLASS5-PIN/GRABBER

Baumalight 1.5-6T Exc TurnKey Pin/Grabber Mount | Include Your D00**** In Notes When Ordering $1,350.00
Add to List

WLEXTURNKEY-CLASS5-WEDGE

Baumalight 1.5-6T Exc Turn Key Wedge Mount | Include Your D00**** In Notes When Ordering $1,050.00
Add to List

WLEXTURNKEY-CLASS8-CROSSPIN

Baumalight 7-9T Exc TurnKey Cross Pin Mount | Include Your D00**** In Notes When Ordering $2,640.00
Add to List

WLEXTURNKEY-CLASS8-PIN/GRABBER

Baumalight 7-9T Exc TurnKey Pin/Grabber Mount | Include Your D00**** In Notes When Ordering $1,650.00
Add to List

WLEXTURNKEY-CLASS8-WEDGE

Baumalight 7-9T Exc Turn Key Wedge Mount | Include Your D00**** In Notes When Ordering $1,050.00
Add to List
Weight 550 lbs