WLCXC542-HX550
Baumalight CXC542 55″ Cutter |Â 3-15 T Exc | Max Brush Size 5″ | HX550 Motor – 20-30 GPM | 3 Blades
$10,360.00
Weight: 640lbs
CXC542 Excavator Rotary Brush Cutter
The 42″ Industrial excavator mounted rotary cutter CXC542 model is offered for mid-range excavators. Built much like the CXC550, the same bearing support is used with only the frame and rotor smaller for less weight to go on smaller excavators. We offer multiple motors to exact match your flow so be sure to checkout the motor options area of the page below to maximize your work as you clear land with your excavator.
| Model No. | CXC530 | CXC542 | CXC550 |
|---|---|---|---|
| Baumalight Connection Code | A02 | A02 | A03 |
| Available Motor Options | HX508, HX510, HX530 | HX530, HX550, HX570 | HX550, HX570, HX590 |
| Recommended GPM | Check Motor Options Chart | ||
| Maximum Brush Size | 3.5″ | 5″ | 6″ |
| Discharge Protection | Open Front and Back | ||
| Path Width | 40″ | 50″ | 67″ |
| Cutting Width | 30″ | 42″ | 50″ |
| Low Cutting Height | 2.5″ | 2.5″ | 2.5″ |
| Number of Blades | 3 | 3 | 3 |
| Slashes per Second | 80 | 80 | 90 |
| Attachment Type | Bolt-On | ||
| Maximum HP | Check Flow & PSI on Carrier | ||
| Case Drain | Critical | Critical | Critical |
| Min Carrier Weight | 2 ton | 3 ton | 8 ton |
| Max Carrier Weight | 10 ton | 15 ton | 20 ton |
| Deck Structure | 1/4″ AR400 steel | 1/4″ AR400 steel | 3/8″ AR400 steel |
| Unit Weight | 550 lbs | 640 lbs | 1,380 lbs |
THREE CUTS PER PASS
As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Brush Cutt advances forward. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 75–100 slashes per second with devastating results. The Brush Cutt’s reversible/replaceable blades are made of long lasting 1/2″ AR 400 steel.
LARGE BEARING SUPPORT
Carburized alloy steel shafts are standard measuring 2.95″ in diameter at the bearings and weighing substantial 104lbs. Built with high quality double-lip oil seals and using an ISO class external bearing locknut system.
BLADE MOUNT
To secure slasher blades to the blade assembly, Baumalight uses Gr. 8 bolts capped off with castle nuts and cotter pins.
3-WAY MODEL
Designed for easy service, the 3-Way models feature a heavy duty rotor with 3 fixed extensions. Each extension is finished off with a slasher blade. This configuration is capable of providing 75–100 slashes per second.
DECK STRENGTH
Taking back your property can be a rough job. We designed and built the deck as a solid platform to take on the task. Built from rugged 1/4 inch steel and then further reinforced with support channels it’s a solid base of operations.
BENT AXIS PISTON MOTOR
Our industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for your brush clearing needs.
ROTOR
Using a 1″ top plate and a 1″ bottom plate this heavy-duty rotor sandwiches the three–way blade assembly in place.
BRUSH CUTTING SIZE CHARTÂ (Brush Diameter in Inches)
| MOTOR | PSI | CASE DRAIN | 6 GPM |
12 GPM |
15 GPM |
20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 827 | 1637 | 2045 | |||||||||
| HX508 | 3000 3500 4000 |
Critical | 0.5″ 0.75″ 1.25″ |
2″ 2.5″ 2.75″ |
2.25″ 2.75″ 3″ |
– – – |
– – – |
– – – |
– – – |
– – – |
– – – |
– – – |
| RPM | 1190 | 1492 | 1990 | |||||||||
| HX510 | 3000 3500 4000 |
Critical | – – – |
2.25″ 2.75″ 3″ |
2.5″ 3″ 3.25″ |
2.75″ 3.5″ 3.75″ |
– – – |
– – – |
– – – |
– – – |
– – – |
– – – |
| RPM | 1075 | 1450 | 1800 | |||||||||
| HX530 | 3000 3500 4000 |
Critical | – – – |
– – – |
2.75″ 3.5″ 3.75″ |
3″ 3.75″ 4″ |
3.5″ 4″ 4.25″ |
– – – |
– – – |
– – – |
– – – |
– – – |
| RPM | 1072 | 1340 | 1600 | |||||||||
| HX550 | 3000 3500 4000 |
Critical | – – – |
– – – |
– – – |
3.5″ 4″ 4.25″ |
3.75″ 4.25″ 4.5″ |
4″ 4.5″ 4.75″ |
– – – |
– – – |
– – – |
– – – |
| RPM | 1019 | 1223 | 1427 | 1631 | ||||||||
| HX570 | 3000 3500 4000 |
Critical | – – – |
– – – |
– – – |
– – – |
4″ 4.5″ 4.75″ |
4.5″ 5″ 5.5″ |
5″ 5.5″ 6″ |
5.5″ 6″ 7″ |
– – – |
– – – |
| RPM | 946 | 1100 | 1260 | 1420 | 1580 | |||||||
| HX590 | 3000 3500 4000 |
Critical | – – – |
– – – |
– – – |
– – – |
– – – |
5″ 5.5″ 6″ |
5.5″ 6″ 7″ |
6″ 7″ 8″ |
7″ 8″ 9″ |
8″ 9″ 10″ |
Triple diameter capacity for felling trees, a rotor speed of over 1,800rpm is not recommended on 42″ or larger.
Excavator Mounting
Baumalight offers two options to mount your attachment on your excavator, blank weld-on plates & turn key custom solutions. All Baumalight excavator mounting options are manufactured in Canada and our team of experts will work with you to ensure you receive the best solution for your excavator.
Blank Weld-On Plates
The bank weld-on plate is designed for you to weld on your own ear lugs for your specific excavator mount. The bolt pattern in the plate lines up with the bolt pattern on Baumalight attachments, allowing you to bolt the attachment in place.
Turn-Key Custom Solutions
A fully customized solution, the team at Baumalight designs and builds your custom excavator adaptor for your specific excavator to ensure that the attachment is ready to go to work as soon as it arrives.
Add Connection Code
Click The Link Below To Find Your Specific D00**** Ex Mount
Add Turn Key Option That Corresponds With Your D00****
Please Note Your D00**** When Ordering
The Turn Key Pricing Includes The Connection Code Price
| Weight | 640 lbs |
|---|