DXA530 Tree Saw | Actuator Rotate-180 Deg | 30″ Dia Blade | 4-12T Ex | Piston T530 Motor | 15-40 GPM
*Requires Case Drain – See Below For Info
*Hydraulic Hoses & Couplers NOT Included
*Must Add Excavator Mounting To Complete – See Below
*The DXA530 Comes With Baumalight’s Auxiliary Electrical Connection. When Ordering Unit, Please Note What Model Of Excavator It Is Going On & The Pin Connection
*A Control Box Kit Must Be Added If –
- Your Excavator Is Older, Without An Auxiliary Electrical Connection
*PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY
DXA530 Rotating Tree Saw for Excavator
Keep your property well-maintained with a Baumalight a hydraulically-driven tree saw. With the DXA530 DropSaw model, a multi angle tree saw for excavators, the cutting head rotates 180 degrees for quick cleaning, trimming and limbing of branches as well as cutting down small trees. Featuring heavy-duty construction and replaceable carbide-tipped teeth, the DXA530 also offers a circular blade made from abrasion-resistant AR-400 steel. Be sure to visit our excavator mounting section of the website to see how we can help mounting an excavator mounted tree saw for you.
|Baumalight Connection Code||A02||A02||A03||A03|
|Maximum Carrier Ton||12||12||22||22|
|Minimum Carrier Ton||4||4||10||10|
|Requires 12V Electric||No||2 Positive Pins||2 Positive Pins||No|
|Requires Case Drain||Yes||Yes||Yes||Yes|
|Hydraulic Hose||Not Supplied||Not Supplied||Not Supplied||Not Supplied|
|Hydraulic Couplers||Not Supplied||Not Supplied||Not Supplied||Not Supplied|
|Motor Type||Bend Axis Piston||Bend Axis Piston||Bend Axis Piston||Bend Axis Piston|
|Blade Material||1/2″ AR400 Blade||1/2″ AR400 Blade||3/4″ Steel Blade||3/4″ Steel Blade|
|Tooth Part number||H3000||H3000||B8000||B8000|
|Type of Teeth||High Speed Teeth||High Speed Teeth||Beaver||Beaver|
|No. of Edges per Tooth||3||3||4||4|
|Number of Teeth||12||12||17||17|
|Unit Shipping Weight||652 lbs||620 lbs||2380 lbs||1808 lbs|
INTERNAL HOSE ROUTING
All of the hydraulic hoses on the DropSaw are sleeved for operator and hose protection while the connecting hoses are sleeved and wrapped in hose armour for double protection. The hoses are then routed internally, keeping them out of harm’s way. The DropSaw also features a pivoting arm with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.
What Is A Case Drain Line ?
On most skidsteer and excavator Hydraulic systems, Hydraulic motors and pumps require a case drain line. Sometimes referred to as a third line, the case drain line will relieve any excess pressure and drain it back to your return line, then into the reservoir. Without a properly installed case drain, that extra pressure could blow a seal or damage your hydraulic line. For higher flow motors or on piston and gear motors, a case drain line is always required. Although, no matter the size of your motor, a case drain is always a good idea as it will relieve the amount of pressure on your shaft seal, helping to prolong its life. A case drain line can also increase the efficiency of your hydraulic system as it will lower the back pressure on the tank line.
Since most machines have a unique style of coupler, BaumaLight does not include a coupler on our case drain line, although they are available. If your skidsteer is not equipped with a case drain, then it can be field installed.
How Important Is A Case Drain Line ?
If we say having a case drain is critical and you operate without one, you will blow out your shaft seal. Be sure to check the motor sizing charts on our website.
Exception If You Have A Hammer Valve
There is one exception in the need for a case drain on gear motors and that is if you excavator is equipped with a hammer valve, this is a larger free flow line back to tank.
Identifying Your Case Drain Line
The following galleries show a highlighted case drain line on multiple skidsteer and excavator models.
Baumalight offers two options to mount your attachment on your excavator, blank weld-on plates & turn key custom solutions. All Baumalight excavator mounting options are manufactured in Canada and our team of experts will work with you to ensure you receive the best solution for your excavator.
Blank Weld-On Plates
The bank weld-on plate is designed for you to weld on your own ear lugs for your specific excavator mount. The bolt pattern in the plate lines up with the bolt pattern on Baumalight attachments, allowing you to bolt the attachment in place.
Turn-Key Custom Solutions
A fully customized solution, the team at Baumalight designs and builds your custom excavator adaptor for your specific excavator to ensure that the attachment is ready to go to work as soon as it arrives.