FBXD752 Feller Buncher | Excavator | 180 Deg Slew Drive | 52″ Dia Blade | 20″ Max Cut | T590 Mtr 30-45 GPM
*Requires Case Drain – See Below For Info
*Hydraulic Hoses & Couplers NOT Included
*Must Add Excavator Mounting To Complete – See Below
*The FBXD752 Comes With Baumalight’s Auxiliary Electrical Connection. (4) Hot On AUX. When Ordering Unit, Please Note What Model Of Excavator It Is Going On & The Pin Connection
*A Control Box Kit Must Be Added If Your Excavator Is Older, Without An Auxiliary Electrical Connection
*PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY
Feller Buncher For Excavator
We are working to design a number of Feller Buncher models and welcome feed back in exchange for preproduction discounts. Our goal is to sell through dealers and then work with end users to develop compact harvesting solutions for skid steers and medium sized excavators. The first excavator mounted Feller Buncher we have build features a 52” cutting disc that can take up to 20” trees and is equipped with 18 beaver style cutting teeth. We also designed this excavator mounted feller buncher with a Slew Drive so there is continues rotation, no stop at any point.
It has an electric-over-hydraulic system which operates efficiently on hydraulic flows as little as 30 gpm and a smaller model would work on lower flow yet. Only one set of remote hydraulics is required to operate all functions if you have an AUX electrical connection. We are very open to requests for new features, larger or smaller models for both skidsteer and excavator.
FBS752 | FBXH752 | FBXP752 | FBXD752 |
– | A03 | A03 | A03 |
Skidsteer Mounted | Excavator Mounted | Excavator Mounted | Excavator Mounted |
Fixed Horizontal Blade | Fixed Horizontal Blade | 90° Pivot Blade | 360° Slew drive |
Universal Skidsteer Adaptor | Bolt-on Adaptor | Bolt-on Adaptor Cylinder Actuator |
Bolt-on Adaptor Slew Drive |
4000 PSI | 4000 PSI | 4000 PSI | 4000 PSI |
Requires 12V Electric | Requires 12V Electric | Requires 12V Electric | Requires 12V Electric |
Four 12V positive switchable signals required | Four 12V positive switchable signals required | Six 12V positive switchable signals required | Six 12V positive switchable signals required |
Wire Supplied to AUX | Wire NOT Supplied | Wire NOT Supplied | Wire NOT Supplied |
Hoses Included Couplers NOT Included |
Hoses & Couplers NOT Included | Hoses & Couplers NOT Included | Hoses & Couplers NOT Included |
52″ Diameter Blade | 52″ Diameter Blade | 52″ Diameter Blade | 52″ Diameter Blade |
20″ Max Cut | 20″ Max Cut | 20″ Max Cut | 20″ Max Cut |
1″ Steel Blade | 1″ Steel Blade | 1″ Steel Blade | 1″ Steel Blade |
1 5/8″ Cutt Thickness | 1 5/8″ Cutt Thickness | 1 5/8″ Cutt Thickness | 1 5/8″ Cutt Thickness |
4 Edges Per Tooth | 4 Edges Per Tooth | 4 Edges Per Tooth | 4 Edges Per Tooth |
18 Teeth | 18 Teeth | 18 Teeth | 18 Teeth |
B8000 Beaver Teeth | B8000 Beaver Teeth | B8000 Beaver Teeth | B8000 Beaver Teeth |
Throat Opening at teeth: 36″ | 36″ Throat Opening | 36″ Throat Opening | 36″ Throat Opening |
What Is A Case Drain Line ?
On most skidsteer and excavator Hydraulic systems, Hydraulic motors and pumps require a case drain line. Sometimes referred to as a third line, the case drain line will relieve any excess pressure and drain it back to your return line, then into the reservoir. Without a properly installed case drain, that extra pressure could blow a seal or damage your hydraulic line. For higher flow motors or on piston and gear motors, a case drain line is always required. Although, no matter the size of your motor, a case drain is always a good idea as it will relieve the amount of pressure on your shaft seal, helping to prolong its life. A case drain line can also increase the efficiency of your hydraulic system as it will lower the back pressure on the tank line.
Since most machines have a unique style of coupler, BaumaLight does not include a coupler on our case drain line, although they are available. If your skidsteer is not equipped with a case drain, then it can be field installed.
How Important Is A Case Drain Line ?
If we say having a case drain is critical and you operate without one, you will blow out your shaft seal. Be sure to check the motor sizing charts on our website.
Exception If You Have A Hammer Valve
There is one exception in the need for a case drain on gear motors and that is if you excavator is equipped with a hammer valve, this is a larger free flow line back to tank.
Identifying Your Case Drain Line
The following galleries show a highlighted case drain line on multiple skidsteer and excavator models.
OPTION #1 – JOYSTICK CONTROL – AUX CONNECTION (Standard)
The ideal solution. The operator can easily control all functions using the controls already equipped on the carrier joysticks. This allows the operator to never remove their hands from the controls to change a function.
OPTION #2 – WIRED CONTROL BOX
Another option, although less than ideal, for controlling the attachment is using our wired control box. The operator would use the toggle switches on the control box to control the functions required. The wired control box requires a 12V connection to supply power.
Excavator Mounting
Baumalight offers two options to mount your attachment on your excavator, blank weld-on plates & turn key custom solutions. All Baumalight excavator mounting options are manufactured in Canada and our team of experts will work with you to ensure you receive the best solution for your excavator.
Blank Weld-On Plates
The bank weld-on plate is designed for you to weld on your own ear lugs for your specific excavator mount. The bolt pattern in the plate lines up with the bolt pattern on Baumalight attachments, allowing you to bolt the attachment in place.
Turn-Key Custom Solutions
A fully customized solution, the team at Baumalight designs and builds your custom excavator adaptor for your specific excavator to ensure that the attachment is ready to go to work as soon as it arrives.
Add Connection Code
Click The Link Below To Find Your Specific D00**** Ex Mount
Add Turn Key Option That Corresponds With Your D00****
Please Note Your D00**** When Ordering
The Turn Key Pricing Includes The Connection Code Price
Weight | 2500 lbs |
---|