Name: WLMP348-540
SKU: 82753
Availability: InStock

MP348 Brush Mulcher | 3PT CAT I | 25-45 HP | 540 RPM | 62″ Path-48″ Blade Width

PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB BV ATWOOD, KS

MP348 Fixed Tooth Mulcher for Power Take Off on a Tractor

The 300 series is our most light weight fixed tooth brush mulcher for 3-point hitch tractors. With low ground speed the MP348 brush mulcher will efficiently cut heavy vegetation and light brush using high speed teeth. The concave shaped carbide tip provides aggressive brush mulching action by chipping the brush bit by bit. Part of the secret of their performance is the ease of rotating the teeth so there is always a sharp edge to make mulching easier.
The direct drive of a brush mulcher on the PTO of a tractor is the most efficient way to run a brush mulcher and if you check our brush cutting size charts you will see that the slower you can travel the bigger material you can handle.

Model No.	MP348	MP360	MP548	MP560	MP572	iSeries MP772	Large Shaft to up the HP
Path Width	60″	72″	62″	75″	87″	84″	D002134
Rotor Width	48″	60″	48″	60″	72″	72″
Maximum Engine HP	50	55	75	75	125	135	90 – 155 PTO Hp
Maximum PTO HP	40	45	65	65	115	125	Do not exceed 165 Engine Hp
Minimum Engine HP	25	30	40	45	50	90
Cutting Depth	Level	Level	Level	1.5″ Above to 1″ Below Grade	1.5″ Above to 1″ Below Grade	Level to 4″ Below
Cutting Style	High Speed Teeth	High Speed Teeth	Carbide Tipped Bolt In	Carbide Tipped Bolt In	Carbide Tipped Bolt In	Carbide Tapper Fit
Number of Cutters	60	74	104	126	160	94
Rotor Shaft Size	2″	2″	2″	2″	2″	2.5″
Rotor Diameter (tool tips)	15″	15″	15″	15″	15″	17.25″
Rotor Weight (with tools)	230 lbs	315 lbs	480 lbs	575 lbs	700 lbs	930 lbs
Hitch Size	CAT 1	CAT 1	CAT 2	CAT 2	CAT 2	CAT 2 or 3
Quick hitch compatibility	No	No	No	No	No	No	No
Drive Speed	540	540	540	540	1,000	1,000
Drive Speed Options					540(Max Engine HP 110)	540(Max Engine HP 110)
Gearbox Spllne Size	1-3/8″	1-3/8″	1-3/8″	1-3/8″	1-3/8″	1-3/8″
Tractor End Spllne Size	1-3/8″	1-3/8″	1-3/8″	1-3/8″	1-3/8″	1-3/8″	1.75″ 20 -spline
System Protection	Sllp Clutch	Sllp Clutch	Sllp Clutch	Sllp Clutch	Sllp Clutch	Sllp Clutch
Unit Weight	1050 lbs	1200 lbs	1600 lbs	2145 lbs	2500 lbs	4558 lbs
Hydraulic Requirements	Not Applicable	Not Applicable	Not Applicable	1 Remote	1 Remote	2 Remotes

INTEGRATED BRUSH BAR

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

INTEGRATED SKID SHOES

These durable skid shoes help the mulcher to better float over the ground for optimal mulching action.

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

HARDENED TOOTH HOLDERS

Heavy-duty teeth holders resist bending and keep you working longer.

SPIRAL TOOTH PATTERN

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

SLIP CLUTCH

To protect the gearbox and drive sytem, Baumalight PTO Mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

HEAVY DUTY GEARBOX

Heavy duty gearbox for high performance and better mulching power and long life.

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

WIRE PROTECTION KIT

Protective steel cover that prevents damage from wire fencing.

POWDERED COATED

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

300 Series

MODEL	TRACTOR SPEED	RPM	25 HP	30 HP	40 HP	55 HP
300 Series
	Low Gear Slow Reverse	1800	0.5″	1″	1.5″	2″
	Low Gear Stop & Chew		1″	1.5″	2″	2.5″
	Hydrostatic Slow Reverse		1.5″	2″	2.5″	3″
	Hydrostatic Stop & Chew		2″	3″	4″	5″

500 Series

MODEL	TRACTOR SPEED	RPM	45 HP	50 HP	60 HP	65 HP	68 HP	75 HP	100 HP	125 HP
MP548 / MP560	Low Gear Creeper Hydrostatic	1800	1″ 2″ 3″	1.5″ 2.5″ 4″	2″ 3″ 5″	— — —	2.5″ 4″ 6″	— — —	— — —	— — —
MP572	Low Gear Creeper Hydrostatic	1800	— — —	— — —	— — —	2.5″ 4″ 6″	— — —	3″ 5″ 8″	3.5″ 6″ 10″	4″ 7″ 12″