Baumalight MP572 84″ Brush Mulcher | CAT 2 | 110 HP | 1-3/8 6-Spline 540 PTO | 500 Series Planer Teeth
Hoses & Couplers Included
MP572 Fixed Tooth Mulcher for Power Take Off on a Tractor
Our 500 series fixed tooth brush mulchers for 3-point hitch tractors are designed to maintain and clear fence lines on farms and entry level contractor work. The 500 series Baumalight brush mulchers will efficiently mulch heavy brush and small trees and are offered with two different types of teeth. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines.
Tractor mounted brush mulchers are not limited to reverse only, drive forward over your mulch and turn it into a finer mulch. Also unique on the MP560 and bigger sizes of tractor mount mulchers is the opening cutting shield. This allows you to adjust for a better, higher angle of attack on bigger brush or keep it closed and control the mulch for even finer results.
With direct drive from the engine, all the way through the heavy duty gear box to the teeth a brush mulcher on the PTO of a tractor is the most efficient way to use a brush mulcher for land clearing.
Model No. | MP348 | MP360 | MP548 | MP560 | MP572 | iSeries MP772 | Large Shaft to up the HP |
---|---|---|---|---|---|---|---|
Path Width | 60″ | 72″ | 62″ | 75″ | 87″ | 84″ | D002134 |
Rotor Width | 48″ | 60″ | 48″ | 60″ | 72″ | 72″ | |
Maximum Engine HP | 50 | 55 | 75 | 75 | 125 | 135 | 90 – 155 PTO Hp |
Maximum PTO HP | 40 | 45 | 65 | 65 | 115 | 125 | Do not exceed 165 Engine Hp |
Minimum Engine HP | 25 | 30 | 40 | 45 | 50 | 90 | |
Cutting Depth | Level | Level | Level | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | Level to 4″ Below | |
Cutting Style | High Speed Teeth | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | |
Number of Cutters | 60 | 74 | 104 | 126 | 160 | 94 | |
Rotor Shaft Size | 2″ | 2″ | 2″ | 2″ | 2″ | 2.5″ | |
Rotor Diameter (tool tips) | 15″ | 15″ | 15″ | 15″ | 15″ | 17.25″ | |
Rotor Weight (with tools) | 230 lbs | 315 lbs | 480 lbs | 575 lbs | 700 lbs | 930 lbs | |
Hitch Size | CAT 1 | CAT 1 | CAT 2 | CAT 2 | CAT 2 | CAT 2 or 3 | |
Quick hitch compatibility | No | No | No | No | No | No | No |
Drive Speed | 540 | 540 | 540 | 540 | 1,000 | 1,000 | |
Drive Speed Options | 540(Max Engine HP 110) | 540(Max Engine HP 110) | |||||
Gearbox Spllne Size | 1-3/8″ | 1-3/8″ | 1-3/8″ | 1-3/8″ | 1-3/8″ | 1-3/8″ | |
Tractor End Spllne Size | 1-3/8″ | 1-3/8″ | 1-3/8″ | 1-3/8″ | 1-3/8″ | 1-3/8″ | 1.75″ 20 -spline |
System Protection | Sllp Clutch | Sllp Clutch | Sllp Clutch | Sllp Clutch | Sllp Clutch | Sllp Clutch | |
Unit Weight | 1050 lbs | 1200 lbs | 1600 lbs | 2145 lbs | 2500 lbs | 4558 lbs | |
Hydraulic Requirements | Not Applicable | Not Applicable | Not Applicable | 1 Remote | 1 Remote | 2 Remotes |
MAXIMUM BRUSH CUTTING SIZES
(Brush Diameter in Inches)
300 Series
MODEL | TRACTOR SPEED | RPM | 25 HP | 30 HP | 40 HP | 55 HP |
---|---|---|---|---|---|---|
300 Series | ||||||
Low Gear Slow Reverse | 1800 | 0.5″ | 1″ | 1.5″ | 2″ | |
Low Gear Stop & Chew | 1″ | 1.5″ | 2″ | 2.5″ | ||
Hydrostatic Slow Reverse | 1.5″ | 2″ | 2.5″ | 3″ | ||
Hydrostatic Stop & Chew | 2″ | 3″ | 4″ | 5″ |
500 Series
MODEL | TRACTOR SPEED | RPM | 45 HP | 50 HP | 60 HP | 65 HP | 68 HP | 75 HP | 100 HP | 125 HP |
---|---|---|---|---|---|---|---|---|---|---|
MP548 / MP560 | Low Gear Creeper Hydrostatic |
1800 | 1″ 2″ 3″ |
1.5″ 2.5″ 4″ |
2″ 3″ 5″ |
— — — |
2.5″ 4″ 6″ |
— — — |
— — — |
— — — |
MP572 | Low Gear Creeper Hydrostatic |
1800 | — — — |
— — — |
— — — |
2.5″ 4″ 6″ |
— — — |
3″ 5″ 8″ |
3.5″ 6″ 10″ |
4″ 7″ 12″ |
700 Series
MODEL | TRACTOR SPEED | RPM | 100 HP | 125 HP | 150 HP |
---|---|---|---|---|---|
iMP772 | Low Gear Creeper Hydrostatic |
1800 | 5″ 7″ 11″ |
7″ 8″ 13″ |
8″ 10″ 15″ |
Planer Tooth Style
The Planer style tooth feeds its appetite for brush bit by bit, taking small bites and providing the most efficient mulching and cutting. Although planer style teeth are efficient, their flat profile make them vulnerable to shattering on impact with rocks and other debris. For that reason, this style of tooth is recommended for cutting applications where efficiency is more important than tooth life. Planer teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.
Ripper Tooth Style
Ripper style teeth is a general use tooth, offering operators a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Ripper teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.
______________________________________________________________________________________________________________________________________________________________________________________________________
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED F.O.B. FACTORY
Weight | 2500 lbs |
---|