WLMS548-C540

ADJUSTABLE SKID SHOES

These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.

INTEGRATED PUSH BAR

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

ARMOURED AND SLEEVED

Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.

V-NOTCH

The force and impact of mulching often bends the teeth. Our V-Notch teeth and hardened holders hold the tooth firmly in place to absorb impacts from multiple directions.

HARDENED TOOTH HOLDERS

These heavy-duty tooth holders resist bending and keep you working longer.

6 FREE TEETH

All MS548 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

OPTION TO CHANGE OUT FOR 500 SERIES RIPPER TEETH

The 500 Series teeth come in two carbide tipped styles; Planer and Ripper. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Both styles are Bolt-on replaceable for quick and easy servicing and replacement even in the field. 500 series teeth are V-Notched to work with the carbon hardened tooth holders.

SPIRAL TOOTH PATTERN

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

OVERTORQUE PROTECTION – RELIEF VALVE

The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.

PRESSURE GAUGE

Large PSI pressure gauge for maintaining the optimal flow that gives you a clear indication of the most efficient brush mulching performance.

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

WIRE PROTECTION

Protective steel cover that prevents damage from wire fencing.

CHAIN CURTAIN

The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.

HEAVY DUTY FRAME

Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.

POWDER COATED

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

ANTI SLIP STRIPS

For ease of entry and exit from the cab an anti-slip strip gives sure footing.

OVERHUNG LOAD ADAPTER (BEARING SUPPORT)

Baumalight mulchers use an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.

MAXIMUM BRUSH CUTTING SIZES (Brush Diameter in Inches)

300 Series

500 Series 

Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates

700 Series

Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates