WLMS572-C530
MS572 Mulcher | Hyd Drive | Universal Skid | 87″ Path-72″ Rotor Width | 20-30 gpm | C530 Motor
$19,400.00
Weight: 2266lbs
MS572 Fixed Tooth Mulcher for Skid Steer
This is a 72” rotor width and 87” path width mulcher and like the rest of our 500 series fixed tooth brush mulchers, it is designed to maintain and clear fence lines on farms and entry level contractor work.The 500 series Baumalight brush mulchers will efficiently mulch heavy brush and small trees and are offered with two different types of teeth. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. The 500 & 700 series skidsteer mulchers come with pressure gauges which is very handy to watch and see how close you are to maximum pressure; once you start blowing over relief the mulcher becomes very unproductive. See our brush cutting size chart to see what limb size this excavator mounted forestry mulcher can handle.
| Model No. | MS348 | MS548 | MS560 | MS572 | MS960 | MS972 | MS1160 |
|---|---|---|---|---|---|---|---|
| Path Width | 60″ | 62″ | 75″ | 87″ | 75″ | 84″ | 75″ |
| Rotor Width | 48″ | 48″ | 60″ | 72″ | 60″ | 72″ | 60″ |
| Minimum carrier weight | 3,000 | 4,000 | 5,500 | 6,000 | 7,000 | 7,500 | 7,000 |
| Cutting Depth | Level | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 2″ Below Grade | 1.5″ Above to 2″ Below Grade | 1.125″ Above to 2.375″ Below Grade |
| Holder Style | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Tool Style | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Double Tipped | Double Tipped | Sharpenable Planer |
| Tooth Part number | H3000 | P5000 | P5000 | P5000 | R9000 | R9000 | P11000 |
| Number of cutters | – | 104 | 126 | 160 | – | – | – |
| Number of cutters (if shipped with new spiral tooth pattern) | 60 | 72 | 92 | 112 | 38 | 43 | 31 |
| Rotor Diameter (tool tips) | 15″ | 15″ | 15″ | 15″ | 18.5″ | 18.5″ | 19.3″ |
| Rotor Weight (with tools) | 230 lbs | 480 lbs | 575 lbs | 700 lbs | 860 lbs | 1,105 lbs | 860 lbs |
| Case Drain | Not important | See motor options | Critical | Critical | Critical | Critical | Critical |
| Hydraulic Couplers | Included | Check with Dealer | Check with Dealer | Check with Dealer | Not Included | Not Included | Not Included |
| Unit Shipping Weight | 950 lbs | 1491 lbs | 2115 lbs | 2266 lbs | 2975 lbs | 3115 lbs | 2800 lbs |
INTEGRATED PUSH BAR
The integrated brush bar helps control the brush and bend taller brush for easier mulching.
ADJUSTABLE SKID SHOES
These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.
ARMOURED AND SLEEVED
Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.
V-NOTCH
The force and impact of mulching often bends the teeth. Our V-Notch teeth and hardened holders hold the tooth firmly in place to absorb impacts from multiple directions.
HARDENED TOOTH HOLDERS
These heavy-duty tooth holders resist bending and keep you working longer.
OPTION TO CHANGE OUT FOR 500 SERIES RIPPER TEETH
The 500 Series teeth come in two carbide tipped styles; Planer and Ripper. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Both styles are Bolt-on replaceable for quick and easy servicing and replacement even in the field. 500 series teeth are V-Notched to work with the carbon hardened tooth holders.
SPIRAL TOOTH PATTERN
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
OVERTORQUE PROTECTION – RELIEF VALVE
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
PRESSURE GAUGE
Large PSI pressure gauge for maintaining the optimal flow that gives you a clear indication of the most efficient brush mulching performance.
REINFORCED BELT
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
WIRE PROTECTION KIT
Protective steel cover that prevents damage from wire fencing.
CHAIN CURTAIN
The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.
HEAVY DUTY FRAME
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
POWDERED COATED
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
ANTI SLIP STRIP
For ease of entry and exit from the cab an anti-slip strip gives sure footing.
OVERHUNG LOAD ADAPTER (BEARING SUPPORT)
Baumalight mulchers use an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
MAXIMUM BRUSH CUTTING SIZES
(Brush Diameter in Inches)
500 Series
| MOTOR | PSI | CASE DRAIN | 8 GPM |
12 GPM |
15 GPM |
20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 555 | 832 | 1060 | 1390 | ||||||||||
| A450 Roller-Vane | 2500 3000 3500 |
Not Needed Not Needed Recommended |
0.25″ 0.5″ 0.5″ |
0.75″ 1″ 1″ |
1″ 1.25″ 1.25″ |
1.5″ 2″ 2″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 640 | 846 | 1100 | 1370 | 1600 | |||||||||
| B550 Roller-Vane | 2500 3000 3500 |
Not Needed Recommended Needed |
— — — |
0.25″ 0.5″ 0.5″ |
0.75″ 1″ 1″ |
1.25″ 1.75″ 1.75″ |
2.5″ 3″ 3″ |
3″ 3.5″ 3.5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 1090 | 1640 | 2050 | |||||||||||
| C508 Bent Axis Piston | 3000 3500 4000 |
Critical | 1.5″ 2″ 2.5″ |
2.25″ 2.75″ 3.25″ |
2.75″ 3.25″ 4″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 1190 | 1490 | 2000 | 2490 | ||||||||||
| C510 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
2″ 2.5″ 3″ |
2.5″ 3″ 3.5″ |
3″ 3.5″ 4.5″ |
3.5″ 4.5″ 5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 1450 | 1800 | 2100 | |||||||||||
| C530 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
3″ 3.5″ 4.5″ |
4″ 4.5″ 5″ |
5″ 5.5″ 5.75″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 1500 | 1800 | 2100 | |||||||||||
| C540 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
3.75″ 4.25″ 4.75″ |
5.5″ 5.75″ 6″ |
6″ 6.5″ 7″ |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 1600 | 1875 | 2140 | |||||||||||
| C550 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
5″ 5.5″ 5.75″ |
6.5″ 7″ 7.5″ |
7″ 7.5″ 8″ |
— — — |
— — — |
— — — |
— — — |
| RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
| C570 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
— — — |
6″ 6.5″ 7″ |
5.5″ 6″ 6.5″ |
7″ 7.5″ 8″ |
7.5″ 8″ 8.5″ |
— — — |
— — — |
| RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
| C590 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
5″ 5.5″ 6″ |
7.5″ 8″ 9″ |
9″ 9.5″ 10″ |
9.5″ 10″ 11″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
What Is A Case Drain Line ?
On most skidsteer and excavator Hydraulic systems, Hydraulic motors and pumps require a case drain line. Sometimes referred to as a third line, the case drain line will relieve any excess pressure and drain it back to your return line, then into the reservoir. Without a properly installed case drain, that extra pressure could blow a seal or damage your hydraulic line. For higher flow motors or on piston and gear motors, a case drain line is always required. Although, no matter the size of your motor, a case drain is always a good idea as it will relieve the amount of pressure on your shaft seal, helping to prolong its life. A case drain line can also increase the efficiency of your hydraulic system as it will lower the back pressure on the tank line.
Since most machines have a unique style of coupler, BaumaLight does not include a coupler on our case drain line, although they are available. If your skidsteer is not equipped with a case drain, then it can be field installed.
How Important Is A Case Drain Line ?
If we say having a case drain is critical and you operate without one, you will blow out your shaft seal. Be sure to check the motor sizing charts on our website.
Exception If You Have A Hammer Valve
There is one exception in the need for a case drain on gear motors and that is if you excavator is equipped with a hammer valve, this is a larger free flow line back to tank.
Identifying Your Case Drain Line
The following galleries show a highlighted case drain line on multiple skidsteer and excavator models.
| Weight | 2266 lbs |
|---|