Baumalight MS960 Brush Mulcher | Universal Skid | 7,000 lb Min Carrier | 75″ Path Width | D97X2 Mtr 20-45 GPM
*PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB BV ATWOOD, KS
*Requires Case Drain
*Includes Hoses – No Couplers
*30 Minute Dealer Set-Up To Fine Tune Two Speed Motor – See Below
MS960 Heavy Duty Fixed Tooth Mulcher for Skidsteer
The MS960 Baumalight brush mulcher is a 60” heavy duty bush mulcher with a 75” Path width and it has turned into a very popular model for mulching with average to large skidsteers.
The 900 Series teeth are available in either Double Carbide Tipped Ripper or Single Blade Planer style. The carbide Ripper tooth is the good general use tooth for mulching with lots of ground contact, if there are not many stones then the Planer tooth is a little bit more efficient.
The 900 series skidsteer mulchers also come with a larger pressure gauge which is very handy to watch and see how close you are to maximum pressure; once you start blowing over relief the mulcher becomes very unproductive so you do want to keep an eye on the pressure.
Operating a Brush Mulcher from a skid steer is probably the most comfortable way for vegetation management as your work is directly in front of you and new skidsteers are very operator comfort focused.
See our brush cutting size chart to see what limb size this heavy duty skidsteer mounted forestry mulcher can handle.
Model No. | MS248 | MS348 | MS548 | MS560 | MS572 | iSeries MS760 | iSeries MS772 | MS960 | MS972 | MS1160 |
---|---|---|---|---|---|---|---|---|---|---|
Path Width | 60″ | 60″ | 62″ | 75″ | 87″ | 75″ | 84″ | 75″ | 84″ | 75″ |
Rotor Width | 48″ | 48″ | 48″ | 60″ | 72″ | 60″ | 72″ | 60″ | 72″ | 60″ |
Minimum carrier weight | 2,000 | 3,000 | 4,000 | 5,500 | 6,000 | 8,000 | 8,500 | 7,000 | 7,500 | 7,000 |
Cutting Depth | Level | Level | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground |
Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
Tool Style | Flail | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Carbide Tapper Fit | Double Tipped | Double Tipped | Sharpenable Planer |
Number of cutters | 30 | 60 | 104 | 126 | 160 | 78 | 94 | 38 | 43 | 31 |
Rotor Diameter (tool tips) | 17.25″ | 15″ | 15″ | 15″ | 15″ | 17.25″ | 17.25″ | 18.5″ | 18.5″ | 19.3″ |
Rotor Weight (with tools) | 125 lbs | 230 lbs | 480 lbs | 575 lbs | 700 lbs | 800 lbs | 930 lbs | 860 lbs | 1,105 lbs | 860 lbs |
System Protection | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief |
Hydraulic Couplers | Included | Included | Check with Dealer | Check with Dealer | Check with Dealer | Not Included | Not Included | Not Included | Not Included | Not Included |
Unit Shipping Weight | 750 lbs | 950 lbs | 1491 lbs | 2115 lbs | 2266 lbs | 2600 lbs | 3150 lbs | 2975 lbs | 3115 lbs | 2800 lbs |
MAXIMUM BRUSH CUTTING SIZES
(Brush Diameter in Inches)
900 Series
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
65 GPM |
70 GPM |
75 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | |||||||||||
C930 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | 3.5″ 4″ 4.5″ 5.5″ |
4.5″ 5″ 5.5″ 6″ |
5.5″ 6″ 6.5″ 7″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
RPM | 1500 | 1800 | 2100 | |||||||||||
C940 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
4.25″ 4.75″ 5.25″ 5.75″ |
6.25″ 6.5″ 6.75″ 7″ |
6.5″ 7″ 7.5″ 8″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
RPM | 1600 | 1875 | 2140 | |||||||||||
C950 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
5.5″ 6″ 6.5″ 6.75″ |
7″ 7.5″ 8″ 8.5″ |
7.5″ 8″ 8.5″ 9″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
C970 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
5.5″ 6″ 7.5″ 8″ |
6″ 6.5″ 7″ 7.5″ |
7.5″ 8″ 8.5″ 9″ |
8″ 8.5″ 9″ 9.5″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
RPM | Adjustable | |||||||||||||
D97X2 Two speed (900 series) |
2500 3000 3500 4000 |
Critical | 4.25″ 5″ 5.5″ 6.75″ |
5.5″ 6.25″ 6.75″ 7.5″ |
7.75″ 8″ 8.5″ 8.75″ |
8.75″ 9.25″ 10″ 10.5″ |
9.25″ 10″ 10.5″ 11.25″ |
10.25″ 11″ 11.5″ 12.25″ |
11.25″ 12″ 12.5″ 13.25″ |
12.25″ 13″ 13.5″ 14.25″ |
13.25″ 14″ 14.5″ 15.25″ |
14.25″ 15″ 15.5″ 16.25″ |
15.25″ 16″ 16.5″ 17.25″ |
16.25″ 17″ 17.5″ 18.25″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
1100 Series
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
65 GPM |
70 GPM |
75 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | |||||||||||
C1130 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | 4.5″ 5″ 5.5″ 6.5″ |
5.5″ 6″ 6.5″ 7″ |
6.5″ 7″ 7.5″ 8″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
RPM | 1500 | 1800 | 2100 | |||||||||||
C1140 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
6.25″ 6.75″ 7.25″ 7.75″ |
8.25″ 8.5″ 8.75″ 9″ |
8.5″ 9″ 9.5″ 10″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
RPM | 1600 | 1875 | 2140 | |||||||||||
C1150 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
8.5″ 9″ 9.5″ 9.75″ |
10″ 10.5″ 11″ 11.5″ |
10.5″ 11″ 11.5″ 12″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
C1170 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
9.5″ 10″ 11.5″ 12″ |
10″ 10.5″ 11″ 11.5″ |
11.5″ 12″ 12.5″ 13″ |
12″ 12.5″ 13″ 13.5″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
C1190 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
— — — — |
— — — — |
10″ 10.5″ 11″ 11.5″ |
12.5″ 13″ 13.5″ 14.5″ |
14″ 14.5″ 15″ 15.5″ |
14.5″ 15″ 15.5″ 16.5″ |
— — — — |
— — — — |
— — — — |
RPM | Adjustable | |||||||||||||
D97X2 Two speed (1100 series) |
2500 3000 3500 4000 |
Critical | 5.5″ 6.25″ 6.75″ 8″ |
7.75″ 8.25″ 9″ 9.5″ |
10.5″ 11.25″ 11.5″ 12″ |
12.5″ 13″ 13.5″ 14.25″ |
13″ 13.75″ 14.25″ 15″ |
14.25″ 15″ 15.5″ 16.25″ |
15.5″ 16.25″ 16.75″ 18″ |
17.5″ 18″ 18.75″ 19.25″ |
18″ 18.75″ 19.25″ 20.5″ |
19″ 19.75″ 20.25″ 21.5″ |
20″ 20.75″ 21.25″ 22.5″ |
21″ 21.75″ 22.25″ 23.5″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
CASE DRAIN – VENT TO ATMOSPHERE
To prevent pressure relief activation on the motor seal, the MS960 comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance.
WIRE PROTECTION KIT
If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.
What Is A Case Drain Line ?
On most skidsteer and excavator Hydraulic systems, Hydraulic motors and pumps require a case drain line. Sometimes referred to as a third line, the case drain line will relieve any excess pressure and drain it back to your return line, then into the reservoir. Without a properly installed case drain, that extra pressure could blow a seal or damage your hydraulic line. For higher flow motors or on piston and gear motors, a case drain line is always required. Although, no matter the size of your motor, a case drain is always a good idea as it will relieve the amount of pressure on your shaft seal, helping to prolong its life. A case drain line can also increase the efficiency of your hydraulic system as it will lower the back pressure on the tank line.
Since most machines have a unique style of coupler, BaumaLight does not include a coupler on our case drain line, although they are available. If your skidsteer is not equipped with a case drain, then it can be field installed.
How Important Is A Case Drain Line ?
If we say having a case drain is critical and you operate without one, you will blow out your shaft seal. Be sure to check the motor sizing charts on our website.
Exception If You Have A Hammer Valve
There is one exception in the need for a case drain on gear motors and that is if you excavator is equipped with a hammer valve, this is a larger free flow line back to tank.
Identifying Your Case Drain Line
The following galleries show a highlighted case drain line on multiple skidsteer and excavator models.
Planer Tooth Style
The Planer style tooth feeds its appetite for brush bit by bit, taking small bites and providing the most efficient mulching and cutting. Although planer style teeth are efficient, their flat profile make them vulnerable to shattering on impact with rocks and other debris. For that reason, this style of tooth is recommended for cutting applications where efficiency is more important than tooth life. Planer teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.
Ripper Tooth Style
Ripper style teeth is a general use tooth, offering operators a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Ripper teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.
Weight | 2975 lbs |
---|