MX530 | Ex Mount 4-12 Ton | 40″ Path-30″ Rotor | 20-30 GPM | C530 Piston | 64 Carbit Teeth
Mount Must Be Added To Complete Unit – Please Note What Mount Is Needed When Ordering
Case Drain Required
Hoses & Couplers Not Included
MX530 Fixed Tooth Mulcher for Excavator, 4-12 Ton
Our 500 series fixed tooth brush mulchers for excavators are designed to maintain and clear fence lines on farms and entry level contractor work. The 500 series Baumalight brush mulchers will efficiently mulch heavy brush and small trees and are offered with two different type of teeth. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. See our brush cutting size chart to see what limb size this excavator mounted forestry mulcher can handle. With the build in control and precision of the excavator, mulching around objects is not a problem, whether it’s in a ditch or overhead.
Model No. | MX230 | MX330 | MX530 | MX530R | MX548 | MX548R | iSeries MX748 | iSeries MX748R | iSeries MX760 | MX960R | MX1160R |
---|---|---|---|---|---|---|---|---|---|---|---|
Baumalight Connection Code | A02 | A02 | A02 | A02 | A03 | A03 | A03 | A03 | A03 | A03 | A03 |
Path Width | 38″ | 38″ | 40″ | 40″ | 62″ | 62″ | 65″ | 70″ | 82″ | 90″ | 90″ |
Rotor Width | 30″ | 30″ | 30″ | 30″ | 48″ | 48″ | 48″ | 48″ | 60″ | 60″ | 60″ |
Maximum Carrier Ton | 6 | 8 | 12 | 12 | 20 | 20 | 25 | 30 | 33 | 33 | 33 |
Minimum Carrier Ton | 2 | 3 | 4 | 4 | 8 | 8 | 18 | 20 | 22 | 18 | 18 |
Cutting Depth | Level | Level | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | Level | Level | Level | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground |
Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
Cutting Style | Flall | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Carbide Tapper Fit | Carbide Tapper Fit | Double Tipped Carbide | Sharpenable Planer teeth |
Number of Cutters | 22 | 36 | 64 | 64 | 104 | 104 | 62 | 62 | 78 | 38 | 31 |
Rotor Shaft Size | 1.5″ | 2″ | 2″ | 2″ | 2″ | 2″ | 2.5″ | 2.5″ | 2.5″ | 2″ | 2″ |
Rotor Diameter (tool tips) | 17.25″ | 15″ | 15″ | 15″ | 15″ | 15″ | 17.25″ | 17.25″ | 17.25″ | 18.5″ | 18.5″ |
Rotor Weight (with tools) | 125 lbs | 175 lbs | 300 lbs | 300 lbs | 408 lbs | 408 lbs | 670 lbs | 670 lbs | 800 lbs | 860 lbs | 872 lbs |
No. of Motor | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||
System Protection | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef |
Unit Weight | 500 lbs | 750 lbs | 1036 lbs | 2167 lbs | 2167 lbs | 3180 lbs | 3300 lbs | 2910 lbs | 2925 lbs |
INTEGRATED SKID SHOES
These durable skid shoes help the Brush Mulcher to better float over the ground for optimal mulching action.
V-NOTCH
The force and impact of mulching often bends the teeth. Our V-Notch teeth and hardened holders hold the tooth firmly in place to absorb impacts from multiple directions.
HARDENED TEETH HOLDERS
Heavy-duty teeth holders resist bending and keep you working longer.
6 FREE TEETH
All MX530 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.
OPTION TO CHANGE OUT FOR 500 SERIES RIPPER TEETH
The 500 Series teeth come in two carbide tipped styles; Planer and Ripper. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Both styles are Bolt-on replaceable for quick and easy servicing and replacement even in the field. 500 series teeth are V-Notched to work with the carbon hardened tooth holders.
SPIRAL TOOTH PATTERN
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
OVERTORQUE PROTECTION – RELIEF VALVE
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
REINFORCED BELT
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
HEAVY DUTY FRAME
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
WIRE PROTECTION KIT
Protective steel cover that prevents damage from wire fencing.
POWDER COATED
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
OVERHUNG LOAD ADAPTER (BEARING SUPPORT)
Baumalight mulchers use an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
Turn-Key Custom Solution
With this option, Baumalight would design and build the excavator adaptor for the specific excavator to ensure that the attachment is ready to go to work as soon as it arrives.
Please visit http://www.baumalight.com/suddenshipping/excavator-adaptor/ to see a complete list of available drawings and measurements. If your chosen excavator shows a part number listed, this is all that is needed to order the excavator adaptor. If the excavator is listed but no part number is shown, the drawing/measurements will need to be confirmed before excavator mount will be built.
If your chosen excavator is not listed, the following process will need to be followed:
For Pin-On and Pin-Grab Style Quick Couplers, please use the worksheet to supply the correct measurements. For Wedge Style and Cross Pin Quick Couplers, the process is a little more involved. For Cross Pin Couplers, we will need access to an attachment utilizing this Quick Coupler to create the drawing. Either, one we can access locally or having yours shipped to us for measuring. We have specialized measuring equipment to create the needed schematic. For Wedge Style Couplers, we will need access to an attachment utilizing this Quick Coupler to create the drawing. Either, one we can access locally or having yours shipped to us for measuring, or a cardboard trace of the shape of the wedge sent to us via courier. Please use the worksheet to supply us with the needed research information. After we have found or created a drawing/schematic, it will be forwarded to the dealer/distributor for end user sign-off.
MAXIMUM BRUSH CUTTING SIZES
(Brush Diameter in Inches)
200 Series
MOTOR | PSI | CASE DRAIN | 12 GPM | 15 GPM | 18 GPM | 20 GPM |
---|---|---|---|---|---|---|
RPM | 832 | 1060 | 1250 | 1390 | ||
200 Series Motor Standard Cup Teeth | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.25″ 0.375″ 0.375″ |
0.375″ 0.5″ 0.5″ |
0.5″ 0.75″ 0.75″ |
0.75″ 1″ 1″ |
RPM | 832 | 1060 | 1250 | 1390 | ||
200 Series Motor Heavy Blade Teeth | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.5″ 0.75″ 0.75″ |
0.75″ 1″ 1″ |
1″ 1.5″ 1.5″ |
1.5″ 2″ 2″ |
300 Series
MOTOR | PSI | CASE DRAIN | 12 GPM | 15 GPM | 18 GPM | 20 GPM |
---|---|---|---|---|---|---|
RPM | 832 | 1060 | 1250 | 1390 | ||
300 Series Motor | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.75″ 1″ 1″ |
1″ 1.25″ 1.25″ |
1.25″ 1.5″ 1.5″ |
2″ 2.5″ 2.5″ |
500 Series
MOTOR | PSI | CASE DRAIN | 8 GPM |
12 GPM |
15 GPM |
20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 555 | 832 | 1060 | 1390 | ||||||||||
A450 Roller-Vane | 2500 3000 3500 |
Not Needed Not Needed Recommended |
0.25″ 0.5″ 0.5″ |
0.75″ 1″ 1″ |
1″ 1.25″ 1.25″ |
1.5″ 2″ 2″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 640 | 846 | 1100 | 1370 | 1600 | |||||||||
B550 Roller-Vane | 2500 3000 3500 |
Not Needed Recommended Needed |
— — — |
0.25″ 0.5″ 0.5″ |
0.75″ 1″ 1″ |
1.25″ 1.75″ 1.75″ |
2.5″ 3″ 3″ |
3″ 3.5″ 3.5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1090 | 1640 | 2050 | |||||||||||
C508 Bent Axis Piston | 3000 3500 4000 |
Critical | 1.5″ 2″ 2.5″ |
2.25″ 2.75″ 3.25″ |
2.75″ 3.25″ 4″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1190 | 1490 | 2000 | 2490 | ||||||||||
C510 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
2″ 2.5″ 3″ |
2.5″ 3″ 3.5″ |
3″ 3.5″ 4.5″ |
3.5″ 4.5″ 5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1450 | 1800 | 2100 | |||||||||||
C530 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
3″ 3.5″ 4.5″ |
4″ 4.5″ 5″ |
5″ 5.5″ 5.75″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1500 | 1800 | 2100 | |||||||||||
C540 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
3.75″ 4.25″ 4.75″ |
5.5″ 5.75″ 6″ |
6″ 6.5″ 7″ |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1600 | 1875 | 2140 | |||||||||||
C550 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
5″ 5.5″ 5.75″ |
6.5″ 7″ 7.5″ |
7″ 7.5″ 8″ |
— — — |
— — — |
— — — |
— — — |
RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
C570 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
— — — |
6″ 6.5″ 7″ |
5.5″ 6″ 6.5″ |
7″ 7.5″ 8″ |
7.5″ 8″ 8.5″ |
— — — |
— — — |
RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
C590 Bent Axis Piston | 3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
5″ 5.5″ 6″ |
7.5″ 8″ 9″ |
9″ 9.5″ 10″ |
9.5″ 10″ 11″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
700 Series
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||||
C730 Bent Axis Piston |
3000 3500 4000 |
Critical | 3.5″ 4″ 5″ |
4.5″ 5″ 5.5″ |
5.5″ 6″ 6.5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1500 | 1800 | 2100 | ||||||||
C740 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
4.25″ 4.75″ 5.25″ |
6″ 6.25″ 6.5″ |
6.5″ 7″ 7.5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1600 | 1875 | 2140 | ||||||||
C750 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
5.5″ 6″ 6.25″ |
7″ 7.5″ 8″ |
7.5″ 8″ 8.5″ |
— — — |
— — — |
— — — |
— — — |
RPM | 1400 | 1630 | 1830 | 2030 | |||||||
C770 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
6.5″ 7″ 7.5″ |
6″ 6.5″ 7″ |
7.5″ 8″ 8.5″ |
8″ 8.5″ 9″ |
— — — |
— — — |
RPM | 1400 | 1570 | 1750 | 1900 | |||||||
C790 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
5.5″ 6″ 6.5″ |
8″ 8.5″ 9.5″ |
9.5″ 10″ 10.5″ |
10″ 10.5″ 11.5″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
900 Series
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||
C930 Bent Axis Piston |
3000 3500 4000 |
Critical | 4″ 4.5″ 5.5″ |
5″ 5.5″ 6″ |
6″ 6.5″ 7″ |
— — — |
— — — |
— — — |
— — — |
RPM | 1500 | 1800 | 2100 | ||||||
C940 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
4.75″ 5.25″ 5.75″ |
6.5″ 6.75″ 7″ |
7″ 7.5″ 8″ |
— — — |
— — — |
— — — |
RPM | 1600 | 1875 | 2140 | ||||||
C950 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
6″ 6.5″ 6.75″ |
7.5″ 8″ 8.5″ |
8″ 8.5″ 9″ |
— — — |
— — — |
RPM | 1400 | 1630 | 1830 | 2030 | |||||
C970 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
6″ 7.5″ 8″ |
6.5″ 7″ 7.5″ |
8″ 8.5″ 9″ |
8.5″ 9″ 9.5″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
1100 Series
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||||
C1130 Bent Axis Piston |
3000 3500 4000 |
Critical | 5″ 5.5″ 6.5″ |
6″ 6.5″ 7″ |
7″ 7.5″ 8″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1500 | 1800 | 2100 | ||||||||
C1140 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
6.75″ 7.25″ 7.75″ |
8.5″ 8.75″ 9″ |
9″ 9.5″ 10″ |
— — — |
— — — |
— — — |
— — — |
— — — |
RPM | 1600 | 1875 | 2140 | ||||||||
C1150 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
9″ 9.5″ 9.75″ |
10.5″ 11″ 11.5″ |
11″ 11.5″ 12″ |
— — — |
— — — |
— — — |
— — — |
RPM | 1400 | 1630 | 1830 | 2030 | |||||||
C1170 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
10″ 11.5″ 12″ |
10.5″ 11″ 11.5″ |
12″ 12.5″ 13″ |
12.5″ 13″ 13.5″ |
— — — |
— — — |
RPM | 1400 | 1570 | 1750 | 1900 | |||||||
C1190 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — |
— — — |
— — — |
— — — |
— — — |
10.5″ 11″ 11.5″ |
13″ 13.5″ 14.5″ |
14.5″ 15″ 15.5″ |
15″ 15.5″ 16.5″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
______________________________________________________________________________________________________________________________________________________________________________________________________
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB ATWOOD