WLMX548R-C510
Baumalight MX548R 62″ Brush Mulcher | Ex Mount 8-20 Ton | C510 Mtr 12-25 GPM | Ripper | Planer Teeth
$15,728.00
Weight: 2167lbs
MX548R Fixed Tooth Mulcher for Excavator, 8-20 Ton
As with the standard MX548, the MX548R is a brush mulcher for excavators, designed to maintain and clear fence lines and entry level contractor work. The difference is aggressive root rake ripper teeth build into the frame to rip out rocks and move logs and has a heavier duty body built with AR400 steel that is the same weight but much stronger than mild steel. All 500 series Baumalight brush mulchers are offered with two different type of cutting teeth. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. See our brush cutting size chart to see what brush size this excavator mounted forestry mulcher can handle.
| Model No. | MX230 | MX330 | MX530 | MX530R | MX548 | MX548R | iSeries MX748 | iSeries MX748R | iSeries MX760 | MX960R | MX1160R |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Baumalight Connection Code | A02 | A02 | A02 | A02 | A03 | A03 | A03 | A03 | A03 | A03 | A03 |
| Path Width | 38″ | 38″ | 40″ | 40″ | 62″ | 62″ | 65″ | 70″ | 82″ | 90″ | 90″ |
| Rotor Width | 30″ | 30″ | 30″ | 30″ | 48″ | 48″ | 48″ | 48″ | 60″ | 60″ | 60″ |
| Maximum Carrier Ton | 6 | 8 | 12 | 12 | 20 | 20 | 25 | 30 | 33 | 33 | 33 |
| Minimum Carrier Ton | 2 | 3 | 4 | 4 | 8 | 8 | 18 | 20 | 22 | 18 | 18 |
| Cutting Depth | Level | Level | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | 1.5″ Above to 1″ Below Grade | Level | Level | Level | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground |
| Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Cutting Style | Flall | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Carbide Tapper Fit | Carbide Tapper Fit | Double Tipped Carbide | Sharpenable Planer teeth |
| Number of Cutters | 22 | 36 | 64 | 64 | 104 | 104 | 62 | 62 | 78 | 38 | 31 |
| Rotor Shaft Size | 1.5″ | 2″ | 2″ | 2″ | 2″ | 2″ | 2.5″ | 2.5″ | 2.5″ | 2″ | 2″ |
| Rotor Diameter (tool tips) | 17.25″ | 15″ | 15″ | 15″ | 15″ | 15″ | 17.25″ | 17.25″ | 17.25″ | 18.5″ | 18.5″ |
| Rotor Weight (with tools) | 125 lbs | 175 lbs | 300 lbs | 300 lbs | 408 lbs | 408 lbs | 670 lbs | 670 lbs | 800 lbs | 860 lbs | 872 lbs |
| No. of Motor | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||
| System Protection | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef |
| Unit Weight | 500 lbs | 750 lbs | 1036 lbs | 2167 lbs | 2167 lbs | 3180 lbs | 3300 lbs | 2910 lbs | 2925 lbs |
MAXIMUM BRUSH CUTTING SIZES
(Brush Diameter in Inches)
300 Series
| MOTOR | PSI | CASE DRAIN | 8 GPM | 10 GPM | 12 GPM | 15 GPM | 20 GPM |
|---|---|---|---|---|---|---|---|
| RPM | 555 | 749 | 832 | 1060 | 1390 | ||
| A450 300 Series Motor | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.25″ 0.5″ 0.5″ |
0.675″ 0.9″ 0.9″ |
0.75″ 1″ 1″ |
1″ 1.25″ 1.25″ |
1.5″ 2″ 2″ |
500 Series
| MOTOR | PSI | CASE DRAIN | 8 GPM |
12 GPM |
15 GPM |
20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 555 | 832 | 1060 | 1390 | ||||||||||
| A450 Roller-Vane | 2500 3000 3500 |
Not Needed Not Needed Recommended |
0.25″ 0.5″ 0.5″ |
0.75″ 1″ 1″ |
1″ 1.25″ 1.25″ |
1.5″ 2″ 2″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 640 | 846 | 1100 | 1370 | 1600 | |||||||||
| B550 Roller-Vane | 2500 3000 3500 |
Not Needed Recommended Needed |
— — — |
0.25″ 0.5″ 0.5″ |
0.75″ 1″ 1″ |
1.25″ 1.75″ 1.75″ |
2.5″ 3″ 3″ |
3″ 3.5″ 3.5″ |
— — — |
— — — |
— — — |
— — — |
— — — |
— — — |
| RPM | 1090 | 1640 | 2050 | |||||||||||
| C508 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | 1″ 1.5″ 2″ 2.5″ |
1.75″ 2.25″ 2.75″ 3.25″ |
2.25″ 2.75″ 3.25″ 4″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1190 | 1490 | 2000 | 2490 | ||||||||||
| C510 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | — — — — |
1.5″ 2″ 2.5″ 3″ |
2″ 2.5″ 3″ 3.5″ |
2.5″ 3″ 3.5″ 4.5″ |
3″ 3.5″ 4.5″ 5″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1450 | 1800 | 2100 | |||||||||||
| C530 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
2.5″ 3″ 3.5″ 4.5″ |
3.5″ 4″ 4.5″ 5″ |
4.5″ 5″ 5.5″ 5.75″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1500 | 1800 | 2100 | |||||||||||
| C540 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
— — — — |
3.25″ 3.75″ 4.25″ 4.75″ |
5″ 5.5″ 5.75″ 6″ |
5.5″ 6″ 6.5″ 7″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1600 | 1875 | 2140 | |||||||||||
| C550 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
— — — — |
— — — — |
4.5″ 5″ 5.5″ 5.75″ |
6″ 6.5″ 7″ 7.5″ |
6.5″ 7″ 7.5″ 8″ |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
| C570 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
5.5″ 6″ 6.5″ 7″ |
5″ 5.5″ 6″ 6.5″ |
6.5″ 7″ 7.5″ 8″ |
7″ 7.5″ 8″ 8.5″ |
— — — |
— — — |
| RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
| C590 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
4.5″ 5″ 5.5″ 6″ |
7″ 7.5″ 8″ 9″ |
8.5″ 9″ 9.5″ 10″ |
9″ 9.5″ 10″ 11″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
900 Series
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
65 GPM |
70 GPM |
75 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | |||||||||||
| C930 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | 3.5″ 4″ 4.5″ 5.5″ |
4.5″ 5″ 5.5″ 6″ |
5.5″ 6″ 6.5″ 7″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1500 | 1800 | 2100 | |||||||||||
| C940 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
4.25″ 4.75″ 5.25″ 5.75″ |
6.25″ 6.5″ 6.75″ 7″ |
6.5″ 7″ 7.5″ 8″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1600 | 1875 | 2140 | |||||||||||
| C950 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
5.5″ 6″ 6.5″ 6.75″ |
7″ 7.5″ 8″ 8.5″ |
7.5″ 8″ 8.5″ 9″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
| C970 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
5.5″ 6″ 7.5″ 8″ |
6″ 6.5″ 7″ 7.5″ |
7.5″ 8″ 8.5″ 9″ |
8″ 8.5″ 9″ 9.5″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
| C990 Bent Axis Piston |
3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
— — — — |
— — — — |
6″ 6.5″ 7″ |
8.5″ 9″ 10″ |
10″ 10.5″ 11″ |
10.5″ 11″ 12″ |
— — — — |
— — — — |
— — — — |
| RPM | Adjustable | |||||||||||||
| D97X2 Two speed (900 series) |
2500 3000 3500 4000 |
Critical | 4.25″ 5″ 5.5″ 6.75″ |
5.5″ 6.25″ 6.75″ 7.5″ |
7.75″ 8″ 8.5″ 8.75″ |
8.75″ 9.25″ 10″ 10.5″ |
9.25″ 10″ 10.5″ 11.25″ |
10.25″ 11″ 11.5″ 12.25″ |
11.25″ 12″ 12.5″ 13.25″ |
12.25″ 13″ 13.5″ 14.25″ |
13.25″ 14″ 14.5″ 15.25″ |
14.25″ 15″ 15.5″ 16.25″ |
15.25″ 16″ 16.5″ 17.25″ |
16.25″ 17″ 17.5″ 18.25″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
1100 Series
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
65 GPM |
70 GPM |
75 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | |||||||||||
| C1130 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | 4.5″ 5″ 5.5″ 6.5″ |
5.5″ 6″ 6.5″ 7″ |
6.5″ 7″ 7.5″ 8″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1500 | 1800 | 2100 | |||||||||||
| C1140 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
6.25″ 6.75″ 7.25″ 7.75″ |
8.25″ 8.5″ 8.75″ 9″ |
8.5″ 9″ 9.5″ 10″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1600 | 1875 | 2140 | |||||||||||
| C1150 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
8.5″ 9″ 9.5″ 9.75″ |
10″ 10.5″ 11″ 11.5″ |
10.5″ 11″ 11.5″ 12″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
| C1170 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
9.5″ 10″ 11.5″ 12″ |
10″ 10.5″ 11″ 11.5″ |
11.5″ 12″ 12.5″ 13″ |
12″ 12.5″ 13″ 13.5″ |
— — — — |
— — — — |
— — — — |
— — — — |
— — — — |
| RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
| C1190 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | — — — — |
— — — — |
— — — — |
— — — — |
— — — — |
10″ 10.5″ 11″ 11.5″ |
12.5″ 13″ 13.5″ 14.5″ |
14″ 14.5″ 15″ 15.5″ |
14.5″ 15″ 15.5″ 16.5″ |
— — — — |
— — — — |
— — — — |
| RPM | Adjustable | |||||||||||||
| D97X2 Two speed (1100 series) |
2500 3000 3500 4000 |
Critical | 5.5″ 6.25″ 6.75″ 8″ |
7.75″ 8.25″ 9″ 9.5″ |
10.5″ 11.25″ 11.5″ 12″ |
12.5″ 13″ 13.5″ 14.25″ |
13″ 13.75″ 14.25″ 15″ |
14.25″ 15″ 15.5″ 16.25″ |
15.5″ 16.25″ 16.75″ 18″ |
17.5″ 18″ 18.75″ 19.25″ |
18″ 18.75″ 19.25″ 20.5″ |
19″ 19.75″ 20.25″ 21.5″ |
20″ 20.75″ 21.25″ 22.5″ |
21″ 21.75″ 22.25″ 23.5″ |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
INTEGRATED SKID SHOES
These durable skid shoes help the Brush Mulcher to better float over the ground for optimal mulching action.
V-NOTCH
The force and impact of mulching bends the teeth. Our V-Notch teeth and hardened holders won’t let that happen. Held firmly in place to absorb impacts from multiple directions the V-Notch keeps the teeth chewing up the toughest brush.
HARDENED TEETH HOLDERS
Heavy-duty teeth holders resist bending and keep you working longer.
SPIRAL TOOTH PATTERN
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
ROOT RAKE
The MX530R, MX548R and iMX748R are equipped with a root rake for pushing fallen logs or other debris out of the way. The MX548R and iMX748R utilize replaceable bucket-style scrapper teeth.
OVERTORQUE PROTECTION – RELIEF VALVE
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
REINFORCED BELT
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
CHAIN CURTAIN
The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.
HEAVY DUTY FRAME
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
WIRE PROTECTION KIT
Protective steel cover that prevents damage from wire fencing.
POWDER COATED
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
OVERHUNG LOAD ADAPTER (BEARING SUPPORT)
Baumalight mulchers use an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
Ripper Tooth Style
Ripper style teeth is a general use tooth, offering operators a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Ripper teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.
Planer Tooth Style
The Planer style tooth feeds its appetite for brush bit by bit, taking small bites and providing the most efficient mulching and cutting. Although planer style teeth are efficient, their flat profile make them vulnerable to shattering on impact with rocks and other debris. For that reason, this style of tooth is recommended for cutting applications where efficiency is more important than tooth life. Planer teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.
Excavator Mounting
Baumalight offers two options to mount your attachment on your excavator, blank weld-on plates & turn key custom solutions. All Baumalight excavator mounting options are manufactured in Canada and our team of experts will work with you to ensure you receive the best solution for your excavator.
Blank Weld-On Plates
The bank weld-on plate is designed for you to weld on your own ear lugs for your specific excavator mount. The bolt pattern in the plate lines up with the bolt pattern on Baumalight attachments, allowing you to bolt the attachment in place.
Turn-Key Custom Solutions
A fully customized solution, the team at Baumalight designs and builds your custom excavator adaptor for your specific excavator to ensure that the attachment is ready to go to work as soon as it arrives.
Add Connection Code
Click The Link Below To Find Your Specific D00**** Ex Mount
Add Turn Key Option That Corresponds With Your D00****
Please Note Your D00**** When Ordering
The Turn Key Pricing Includes The Connection Code Price
| Weight | 2167 lbs |
|---|