Worksaver Model 914HC Hyd Digger | Univ. Skid | 5-10 GPM @ 1500-3000 PSI | Augers 6″-14″ Dia.
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY
*The length of hoses required can vary and are not included. Measure for the hydraulic hose requirement for the motor. Be sure to allow for raising and lowering the loader and tipping the bucket. We recommend 1/2” I.D. hose rated for 2500 PSI or greater service, in accordance with your tractor system pressure. Consult your power unit’s owner’s manual or dealer for recommendations. The ports in the hydraulic motor accept 7/8 – 14 straight thread o-ring male fittings. Use a good grade liquid thread sealant. Do not use thread tape, as this can contaminate the hydraulic system. Loader Hose Kits Available Below To Connect To Tractor Rear Remotes.
Model 924HC
- Hydraulic
- “Universal” Skid Steer Mount
- Hydraulic Requirements 5-10 gpm @ 1500-3000 psi
- Uses 6″-14″ augers
- Less Hoses
Increase your reach over shrubs, fence lines and other obstructions with a skid steer mounted 914HC/924HC hydraulically driven digger. It’s a great time saver with exceptional up-front visibility and control. Frame design incorporates a gearbox cradle to eliminate auger swing during transport. Choose from 6” to 24” diameter augers. Counter weights assures the digger maintains its vertical position. Note: These diggers will also fit on tractor loaders equipped with the “universal” skid steer attaching system. Models are also available for tractor loaders with the Euro/Global bucket quick attach system.
Model | 914HC | 924HC | 924HC/Euro |
Mount Type | Skid Steer | Skid Steer | Euro/Global |
Gearbox Ratio | 3.18:1 | 3.18:1 | 3.18:1 |
Gearbox Output Shaft | 2″ | 2″ | 2” |
Gearbox Bearings | Tapered Roller | Tapered Roller | Tapered Roller |
Gearbox Seals | Double lip, spring loaded |
Double lip, spring loaded |
Double lip, spring loaded |
Drive Type | Hydraulic | Hydraulic | Hydraulic |
Shear Bolt | N/A | N/A | N/A |
Gearbox Ltd. Warranty | 5-yrs. | 5-yrs. | 5-yrs. |
Hyd. Requirement | 5-10 GPM | 10-20 GPM | 10-20 GPM |
Hyd. Pressure psi | 1500-3000 | 1500-3000 | 1500-3000 |
Auger Sizes | 6” thru 14″ | 6” thru 24″ | 6” thru 24” |
Auger Length | 42″ | 42″ | 42” |
Auger Type | STD, HDSF, HDDF | STD, HDSF, HDDF | STD, HDSF, HDDF |
Auger Point – Bolt-in | Fish Tail | Fish Tail | Fish Tail |
12″ Auger Ext. | Opt. (170705) | Opt. (170705) | Opt. (170705) |
Weight (lbs.) | 208 | 210 | 220 |
Product Number | 702120 | 702125 | 702135 |
Note: $10 Packing Charge For Augers Shipped UPS (Under 70 lbs. Only) – Larger Augers Will Ship LTL.
For Use In Lighter Soils, Free Of Stones, Roots Etc.
For Use When Encountering Tougher Digging Conditions Or Where Stones, Roots, Etc. May Be Present.
For Use When Operating In Loose Flow-Able Soils Such As Sand/Gravel, Designed To Help Carry Soil To The Surface Of The Hole.
Weight | 208 lbs |
---|