Worksaver Universal Skid All Hydraulic Adjustment Post Driver
Features:
- Maximum Post Size 6″ x 9′
- 32,000 lbs. Of Force
- Hydraulic Adjustment
- Quick Change System
Note: MSS & HSS models for skid steer loaders require the purchase of a return line package for proper operation. Flat Face Couplers NOT Included.
______________________________________________________________________________________________________________________________________________________________________________________________________
Worksaver Hydraulic Post Drivers
Worksaver with over two decades of post driver innovations now offers two series of post drivers. Our standard duty model HPD-16 incorporates many of the innovations first brought to the market by Worksaver: “convertible” hydraulic valve, grease zerks at all major pivot locations, plated manual cranks, plastic slide blocks, adjustable legs, bubble level, and SplitCap™. The HPD-16 (32,000 lbs. of force) is ideal for the small property owner with limited fence posts to drive. Our patented Q-series of hydraulic drivers, HPD-22Q (80,000 lbs. of force) and HPD-26Q (110,000 lbs. of force) offer ingenious solutions to routine maintenance to keep the operator building fence. Q-series drivers feature two time savings QuickChange™ system. Worksaver’s SplitCap™ with enhanced cylinder rod design allows the operator to perform routine maintenance on the rod cap seal without removing the cylinder from the driver. Our Q-spring assembly reduces spring change over from hours to minutes. This design offers increased service life when compared to conventional post driver springs. The integrated spring/ spring-anchor design when mounted to the cushion mounts reduces vibration which further provides increased spring service life. Increasing fence-building performance, making the Q-series a game changer.
The patented Q-series of hydraulic post drivers continues Worksaver’s innovation with post drivers. In the past two decades Worksaver has brought the following enhancements to the market:
- First to replace metal rollers with plastic slide blocks
- Patented skid steer return lines on skid steer post drivers
- First to install a rubber deflector guard around driving head assembly
- Self-contain post driver for skid steer loaders
- First to develop front loader mounted post drivers
- First to develop “universal” return line fitting
- First with circular bubble level on all models
- First with adjustable legs on all models
- First with “convertible” valve for open center/closed center hydraulic systems
______________________________________________________________________________________________________________________________________________________________________________________________________
Universal Skid Post Drivers
Want greater multi-task performance from your skid loader? Then connect it to a hydraulic skid steer mounted post driver. The HPD-16 & HPD-22Q are offered either with manual crank adjustment (MSS) or hydraulic adjustment (HSS) for quicker productivity. The model HPD-26Q HSS is all hydraulic adjust with 3” x 6” cylinders, all feature the Big-foot stabilizer for improved stability and operating performance. This combination makes transport simple, enables maneuverability into areas not accessible with a tractor while increasing operator productivity and skid steer versatility.
Model | HPD-16 MSS | HPD-16 HSS | HPD-22Q MSS | HPD-22Q HSS | HPD-26Q HSS |
Max. Post Size | 5” x 9’ | 5” x 9’ | 8-3/4” x 10’ | 8-3/4” x 10’ | 11” x 10’ |
Impact at Full Stroke | 32,000 lbs. | 32,000 lbs. | 80,000 lbs. | 80,000 lbs. | 110,000 lbs. |
Impact at Half Stroke | 16,000 lbs. | 16,000 lbs. | 40,000 lbs. | 40,000 lbs. | 55,000 lbs. |
Mount Type | Skid Steer | Skid Steer | Skid Steer | Skid Steer | Skid Steer |
Tilt Adj. Front/Back | 10° each way | 17° each way | 10° each way | 17° each way | 17° each way |
Tilt Adj. Side/Side | 17° each way | 20° each way | 17° each way | 20° each way | 20° each way |
Manual Adjust | Yes | No | Yes | No | No |
Hydraulic Adjust | No | Yes | No | Yes | Yes |
Adj. Cylinders/Size | N/A | (2) 3” x 6” | N/A | (2) 3” x 6” | (2) 3” x 6” |
Stabilizer Legs | Standard | Standard | Standard | Standard | Standard |
Big Foot | N/A | Yes | N/A | Yes | Yes |
Slide Blocks Material | Nyrim | Nyrim | UHMW* | UHMW* | UHMW* |
Spring Post Holder | Standard | Standard | Standard | Standard | Standard |
Min. Tractor Size | N/A | N/A | N/A | N/A | N/A |
Rear Hitch Category | N/A | N/A | N/A | N/A | N/A |
Min. Hydraulic Req. | 3-4 GPM | 3-4 GPM | 6-8 GPM | 6-8 GPM | 12 GPM |
QuickChange Rod Seal | Yes | Yes | Yes | Yes | Yes |
Q-springs | N/A | N/A | Yes | Yes | Yes |
Valve(s) | Sgl. Spool | Sgl./Dbl. Spool | Sgl. Spool | Sgl./Dbl. Spool | Sgl./Dbl. Spool |
Hoses less couplers | Standard | Standard | Standard | Standard | Standard |
Offset (to left of tractor Ctr.) | N/A | N/A | N/A | N/A | N/A |
Self Contained Unit | N/A | N/A | N/A | N/A | N/A |
Reservoir Capacity | N/A | N/A | N/A | N/A | N/A |
Pump Type | N/A | N/A | N/A | N/A | N/A |
Pressure Relief Setting | N/A | N/A | N/A | N/A | N/A |
Weight (lbs.) | 678 | 950 | 828 | 1245 | 1429 |
Product Number | 814628 | 814630 | 815315 | 815320 | 815350 |
______________________________________________________________________________________________________________________________________________________________________________________________________
Return Line Kits – Must Add One
Return Line kits are required for all MSS & HSS (except HSS/P) models. These kits contain fittings to allow the oil to be returned to the hydraulic reservoir.
Note: Every attempt has been made to provide return line packages for current skid steer loader models. However, some models are not adaptable (i.e.: Caterpillar Models, ASV Posi-Track and others). They can be fit with a hydraulic post driver by using a HSS/P model, which is a self-contained units and requires no return line fitting. If you have questions, please consult the factory.
Bobcat | WO814905 | Return line fittings, hoses, and hardware for all models except 773G & 873G (**Note: Approx. 4″ diameter screw type plastic cap) |
Bobcat | WO814908 | For Models S130, S150, S160, S175, S185, T140, T190 |
Case | WO815105 | For most 1835, 1835B, 1835C, 1840, 1845, 1845B & 1845C (Large Diameter Cap) |
Case | WO814915 | For Models 410,420,430,440,435,445,450,465, 40XT, 60XT, 70XT, 75XT, 85XT, 90XT, 95XT, SR150, TR270, TR320, SV175, SV185, SV250, SV300, TV380 Return line fitting |
Thomas | WO814915 | For All Models including 85, 105, 137, 153, 175, 205, 250, 255 Return line fitting |
Daewoo | WO814915 | For All Models including 430, 440, 450, 460, 1340XL Return line fitting |
John Deere | WO814910 | For Units prior to 1/99 Return line fittings, hose and hardware, Models 375, 575, 3375, 4475, 5575 |
John Deere 200-Series | WO814920 | For early 200-series return line fittings, hose and hardware. |
John Deere | WO815075 | For late models 240,250, 260, 270, 280 with screw type hydraulic reservoir cap, return line fittings |
John Deere | WO815075 | For Models 317,320, 325, 328, 332 return line fittings (Side panel must be removed) |
John Deere | WO815110 | For Models 313, 315, 318D, 319D, 320D, 323D, 326D, 328D, 329D, 332D, 333D, CT315 return line fittings |
Kubota | WO815115 | For Models SVL-75, SVL-90 |
Gehl | WO814895 | For All Models including SL 3635 SX, SL3935 SX, SL 4640, SL 4840, SL 5640, SL 6640, SL 7810, V270, V330, V400, V6640, 5240, 3640E, 4240E, 5240E, 5640E, 6640E, RT175, RT210, CT185 Return line fitting |
Mustang | WO814940 | For All Models including 2022, 2032, 2040, 2050, 2060, 2070, 2044, 2054, 2066, 2099, Return line fitting |
Mustang | WO814895 | For All Models including 2026, 2041, 2076, 2086, 2109, 2700V, 3300V, 1750RT, 2100RT, MTL325 |
New Holland | WO814910 | For All Models including LS120, LS125, LS140, LS150, LS160, LS170, LS175, LS180, LS185.B, LS190.B, C175, C185, C190, L553, L554, L555, L781, L783, L784, LX665, L865, LX885, LX985 Return line fittings, hose & hardware |
New Holland | WO815055 | For All Models including L213, L215, L218, L220, L223, L225, L230, C227, C232, C238 Return line fittings, hose & hardware |
Accessories
WO814490 | Adapter for steel “T”-posts |
______________________________________________________________________________________________________________________________________________________________________________________________________
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY