H&S MS3123 Manure Spreader | 540 PTO Worm Drive | Hyd Endgate | Struck Level 122.04 cu. ft. / 235 Bu

Tractor Requirement – Once The Spreader Is Loaded, It Shouldn’t Weight More Than 1.5 Times The Weight Of The Tractor

Unit Includes

Single Axle With 295 x 22.5 Recap Tires / Rims
540 PTO
2-Speed Apron Drive Gearbox
29″ Dia Beater With Replaceable Paddles
Fiberglass Reinforced Plywood Sides, Front Panel, & Hyd Engate
10 Gauge Culvert Grade Galvanized Steel Side Flares
Bonded Poly Floor
T-Rod Apron Chain
Hyd Endgate With Cylinder, Hoses, & Tips
Front Splash Guard
Greasable Bearings
Jack

Additional Features

A massive unitized welded frame with heavy floor supports and side stakes, wrap around steel front corners. Strong rear main beater side panels are slanted for clearance and wider spread, and then welded to the strong 5″ U channel side members compare with any on the market.
The side flares on all H&S “Heavy Duty” manure spreaders are made of 10 gauge g210 culvert grade galvanized steel.
Sides, front panel and both sides of the rear hydraulic end gate use fiberglass reinforced plywood to provide for easy cleaning and minimal freeze up. It also features a plastic coated plywood floor. Considerably less torque is needed to move a heavy load.
A front splash guard is standard equipment.
Greasable bearings.
The drive utilizes the patented H&S 2 speed gear box. Shifting is all done in the enclosed two speed/beater shutoff gear box.
A 29″ diameter beater with 14 replaceable beater paddles. The beater has two types of paddles, blunt for widespread and sharp ripper type for cutting and shredding. The beater side wiper blades are also standard equipment.
Adjustment for the main apron is easy by simply loosening the two side bolts and drawing up the long bolt.
Unloading Speed for 3123 and 3127 – (2 speed gear box) High Speed: PTO speed 540 rpm’s 8′9″ per minute Low Speed: PTO speed 540 rpm’s 4′9″ per minute.

Unit	S3123	S3127	S3231	S3237	SW3243
Capacity – Old Rating	235 bu	270 bu	310 bu	370 bu	430 bu
Capacity Cu. Ft. Struck Level Per ASAE S324.2	122.04	146.35	164.58	215.68	260.59
Capacity Cu. Ft. Heaped Per ASAE S324.2	209.89	252.46	284.39	344.38	386.22
Top of Flare Width	68″ (173 cm)	68″ (173 cm)	68″ (173 cm)	68″ (173 cm)	68″ (173 cm)
Inside Width	60″ (152 cm)	60″ (152 cm)	60″ (152 cm)	60″ (152 cm)	60″ (152 cm)
Inside Length	11′ 4″ (3.45 m)	13′ 4″ (4.06 m)	14′ 10″ (4.52 m)	16′ (4.88 m)	16′ (4.88 m)
Inside Depth	28 ⅜″ (72 cm)	28 ⅜″ (72 cm)	28 ⅜″ (72 cm)	34 ⅜″ (87 cm)	40 ⅜″ (102 cm)
Overall Width w/Standard Tires	94 ½″ (240 cm)	94 ½″ (240 cm)	98″ (249 cm)	98″ (249 cm)	112″ (285 cm)
Overall Length	18′ 6″ (5.7 m)	20′ 5 ½″ (6.3 m)	21′ 11 ½″ (6.7 m)	23′ 2 ½″ (7.1 m)	23′ 2 ½″ (7.1 m)
Overall Loading Height-Top Of Side	51 ½″ (131 cm)	51 ½″ (131 cm)	51 ½″ (131 cm)	57 ½″ (1.5 m)	63″ (160 cm)
Overall Height w/Hyd. Endgate	55″ (139.7 cm)	55″ (139.7 cm)	55″ (139.7 cm)	61″ (154.9 cm)	63 ½″ (161.3 cm)
Diameter Of Beater	29″ (74 cm)	29″ (74 cm)	29″ (74 cm)	29″ (74 cm)	29″ (74 cm)
Main Apron Chain	T-Rod	T-Rod	T-Rod	T-Rod	T-Rod
Spindle Size	2″ (5 cm)	2 ½″ (6 cm)	2 ¼″ (6 cm)	2 ½″ (6 cm)	2 ½″ (6 cm)
Standard Tire Size	295 × 22.5 Recap	295 × 22.5 Recap	295 × 22.5 Recap	295 × 22.5 Recap	16.5 × 16.1 Flotation
Weight w/Tires	2,890 lbs. (1,311 kg)	3,230 lbs. (1,495 kg)	4,190 lbs. (1,901 kg)	4,920 lbs. (2,232 kg)	5,500 lbs. (2,495 kg)
Rear Hydraulic Endgate	Standard	Standard	Standard	Standard	Standard
PTO Speed	540	540	540 – Standard \| 1000 – Optional	540 – Standard \| 1000 – Optional	540 – Standard \| 1000 – Optional
Jack	Standard	Standard	Standard	Standard	Standard
Drive	2-Speed	2-Speed	2-Speed	2-Speed	2-Speed
Front Splash Panel	Standard	Standard	Standard	Standard	Standard
Hyd. Cyl On Hyd. Endgate	1 – Standard \| 2 – Optional	1 – Standard \| 2 – Optional	1 – Standard \| 2 – Optional	2	2
Upper Beater	Optional	Optional	Optional	Optional	Standard