H&S 16 Wheel Flex Frame Rake | 16-60″ Rake Wheels With Panels | Raking Width 32′ | Tandem Rear Transport Wheels

Model	FF6116	FF6118	FF6120
Number of Wheels	16	18	20
Wheel Diameter	60″	60″	60″
Teeth Per Wheel	40	40	40
Tooth Diameter	7.5 mm	7.5 mm	7.5 mm
Ground Pressure Rake Wheel Adjustment	Nut/Threaded Rod	Nut/Threaded Rod	Nut/Threaded Rod
Rake Wheel Hubs	Ball Bearings	Ball Bearings	Ball Bearings
Rake Wheel Anti-Wrap Shields	Standard	Standard	Standard
Rake Wheel Suspension	Independent “Bee Hive” Spring	Independent “Bee Hive” Spring	Independent “Bee Hive” Spring
Number of Raking Positions	6	6	6
Rake Wheel Wind Panels	Standard	Standard	Standard
Jack	Standard	Standard	Standard
Gauge Wheels	(4) 9.5L x 15	(4) 11L x 15	(4) 11L x 15
Rear Transport Wheels		4 – 11L X 15	4 – 11L X 15
Transport Width	10′ 6″	11′ 6″	11′ 6″
Transport Length	32′ 7″	34′ 8″	37′ 6″
Transport Height in Transport Position	80″ w/SMV Sign	N/A	N/A
Maximum Raking Width	32′	35′ 6″	38′ 6″
Windrow Width Adjustment	3′ – 5′	3′ – 5′	3′ – 5′
Weight	5,750 lbs.	7,894 lbs.	8,224 lbs.
Hydraulic Requirements	1 Double Acting Cylinder For Folding – 1 Double Acting Cylinder for Rake Wheel Lift	1 Double Acting Cylinder For Folding – 1 Double Acting Cylinder for Rake Wheel Lift	1 Double Acting Cylinder For Folding – 1 Double Acting Cylinder for Rake Wheel Lift

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Flex Frame Rakes

H&S Flex Frame Rakes

H&S Flex-Frame wheel rakes are available in 16, 18, 20, and 22 wheel models.
The raking wheels are positioned ahead of the rake arms, main frame beams and transport wheels. coupled with a high and wide end of frame, there are no hang-up points or restrictions when raking the heaviest of hay crops.
The rake beams and rake arms feature flex-joints for maximum flexibility over the terrain.
A brake band on each front gauge wheels can be easily adjusted to field conditions.
Large independent 60″ rake wheels with “Bee Hive” style spring suspension follow the contours of the ground smoothly.
A large diameter rake wheel hub is used for added strength to the rake wheel dish.
The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the Flex-Frame wheel rakes to fit varying conditions.
The rake arms feature 2 ball bearings on each end of the arm for long life, smooth operation, and less wear than rakes with bushings.
The 60″ diameter rake wheels turn slower for less tooth wear and deliver more capacity.
Windrow width adjustment is made by a ratchet jack. A Hydraulic Rear Windrow Width Adjustment is Optional.
Each rake beams articulates and flexes independently.
Raking widths can be hydraulically adjusted in any position up to the pre-determined raking width. Setting the spring loaded stop allows you to set a pre-determined raking width.
Rake wheel wind boards are standard on the Flex-Frame Rakes.
Optional rear limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks.
A center kicker wheel assembly is optional.