Discontinued - 2 Left
HSAR3110
H&S 10 Wheel Action Hay Rake | 10-60″ Wheels | Raking Width 18′-22′ | Indep. Rake Wheel Suspension
$11,705.00
Unit Includes
- 10-60â³ Wheels
- Kwik Pik Feature (Immediate windrow clearance at end of field)
- Dual Cylinders For Single Side Raking
- Independent Rake Wheel Suspension
- 205-75D15 Tires
| 3108 | ||
|---|---|---|
| NUMBER OF WHEELS | 8 | |
| WHEEL DIAMETER | 60â³ | |
| TEETH PER WHEEL | 40 | |
| TOOTH DIAMETER | 7.5mm | |
| RAKE WHEEL HUBS | Tapered Bearings | |
| TRANSPORT WIDTH | 10â² | |
| TRANSPORT LENGTH | 19â² | |
| TRANSPORT HEIGHT IN TRANSPORT POSITION | 86â³ | |
| RAKING WIDTH | 15â² â 19â² | |
| WINDROW WIDTH ADJUSTMENT | 3â² â 5â² | |
| NO. OF RAKING POSITIONS | 6 | |
| GROUND PRESSURE RAKE WHEEL ADJUSTMENT | Independent wheel flotation with single side adjustment crank | |
| ACTION CYLINDER â RAISE/LOWER | 4 ½Ⳡ| |
| WING CYLINDERS | 2â³ | |
| JACK | Standard | |
| WEIGHT | 1,800# | |
| CENTER KICKER WHEEL | Optional | |
| TRANSPORT WHEELS | (2) â ST205/75D15 | |
| ADJUSTABLE BALL HITCH | Optional | |
| 3110 | ||
|---|---|---|
| NUMBER OF WHEELS | 10 | |
| WHEEL DIAMETER | 60â³ | |
| TEETH PER WHEEL | 40 | |
| TOOTH DIAMETER | 7.5mm | |
| RAKE WHEEL HUBS | Tapered Bearings | |
| TRANSPORT WIDTH | 10â² 8â³ | |
| TRANSPORT LENGTH | 21â² | |
| TRANSPORT HEIGHT IN TRANSPORT POSITION | 101â³ | |
| RAKING WIDTH | 18â² â 22â² | |
| WINDROW WIDTH ADJUSTMENT | 3â² â 6â² | |
| NO. OF RAKING POSITIONS | 10 | |
| GROUND PRESSURE RAKE WHEEL ADJUSTMENT | Independent wheel flotation with single side adjustment crank | |
| ACTION CYLINDER â RAISE/LOWER | 4 ½Ⳡ| |
| WING CYLINDERS | 2â³ | |
| JACK | Standard | |
| WEIGHT | 2,000# | |
| CENTER KICKER WHEEL | Optional | |
| TRANSPORT WHEELS | (2) â ST205/75D15 | |
| ADJUSTABLE BALL HITCH | Optional | |
| 3112 | ||
|---|---|---|
| NUMBER OF WHEELS | 12 | |
| WHEEL DIAMETER | 60â³ | |
| TEETH PER WHEEL | 40 | |
| TOOTH DIAMETER | 7.5mm | |
| RAKE WHEEL HUBS | Tapered Bearings | |
| TRANSPORT WIDTH | 12â² | |
| TRANSPORT LENGTH | 23â² | |
| TRANSPORT HEIGHT IN TRANSPORT POSITION | 105â³ | |
| RAKING WIDTH | 20â² â 24â² | |
| WINDROW WIDTH ADJUSTMENT | 3â² â 6â² | |
| NO. OF RAKING POSITIONS | 10 | |
| GROUND PRESSURE RAKE WHEEL ADJUSTMENT | Independent wheel flotation with single side adjustment crank | |
| ACTION CYLINDER â RAISE/LOWER | 4 ½Ⳡ| |
| WING CYLINDERS | 2â³ | |
| JACK | Standard | |
| WEIGHT | 2,250# | |
| CENTER KICKER WHEEL | Optional | |
| TRANSPORT WHEELS | (2) â ST205/75D15 | |
| ADJUSTABLE BALL HITCH | Optional | |
3100 Series Action Rakes
H&S 3100 Series Rakes
- High Clearance Action Rakes features a âKWIK PIKâ (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
- An Adjustable Hitch allows you to level the rake for efficient raking.
- Right and left side raking is done easily by turning either one of the wing transport valves off.
- A 49â³ Center Kicker Wheel is optional on all Action Rakes.
- The hitch jack is used to adjust the windrow width as shown.
- Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
- The spring suspension system allows each rake wheel to float independently over the ground. The down pressure for ALL the wheels on each side is done by a single a single hand crank.
